Assa Abloy Yale YM Series User manual

PARALLEL ARM Installation
Closer Mounted On Push Side Of Door
Parallel arm installation to 140° opening.
5-5/8
(143) 1-7/8
(48)
15/16
(24)
Parallel Bracket
Arm Screw and
Lockwasher
1/2
(13)
7/8
(22)
3 holes for 3/16 (4.8) wood
or M5xP0.8 machine screws
Ø
Hinge Edge of Door
3/4
(19)
3
(76)
4-1/8
(105) 9-1/16 (230)
Speed Regulating Screws
Away From Hinge Edge of Door
4 Holes for Ø7/32 (5.6) Wood Screws
or M5xP0.8 Machine Screws
SPEED- Door closing and latching speeds are controlled by
"1", "2" speed regulating screw separately.
A: Clockwise turns slow the speed.B:Counterclockwise turns
increase the speed.
1
2
Closing Speed
Regulating Screw
Latching Speed
Regulating Screw
Fast Slow
BA
Speed
Latch
LEFT HAND DOOR SHOWN.
Same dimensions apply for Right Hand
door measured from hinge edge.
Do not scale drawing.
All dimensions given in inches (mm).
ADJUSTMENT INSTRUCTIONS
1. Use dimensions shown in above template to mark (4) four holes
on door for closer and (3) three holes on frame for parallel
bracket.
2. Drill pilot holes in door and frame for Ø7/32" (5.6) wood screws
or M5xP0.8 machine screws.
3. Mount closer on door with SPEED REGULATING SCREW
AWAY FROM HINGE EDGE.
4. Attach parallel bracket to door stop as illustrated.
5. Using a wrench on the square shaft on bottom of closer, rotate
shaft approximately 45° toward hinge edge of door. Hold and
place main arm on shaft on top of closer and proper index mark
as illustrated.
FOR LEFT HAND DOOR NO. 3 (ILLUSTRATION "A").
FOR RIGHT HAND DOOR NO. 2 (ILLUSTRATION "B").
6. Mount arm shoe and parallel bracket with M5x6mm screws.
7. Adjust length of forearm to connect main arm (The main arm will
be slightly away from door.) and assemble at elbow then tighten
locknut.
PARALLEL ARM INSTALLATION INSTRUCTIONS
Forearm
Locknut
Main Arm
41
2
3
Index Mark
Left hand door, use index mark 3
ILLUSTRATION "A"
Forearm
Locknut
Main Arm
41
2
3
Index Mark
Right hand door, use index mark 2
ILLUSTRATION "B"
POSITION OF ARMS AND INDEX SETTINGS
YMDC1105 Installation Instructions

2
TOP JAMB Installation
Closer MountedTop Jamb On Push Side of Door
Top jamb installation to 180° Opening. 1-3/4" (44.5) Maximum Reveal.
Shaft
Speed Regulating Screws
Toward Hinge Edge of Door
1-3/4
(45)
1-1/2
(38)
2 Holes for Ø3/16 (4.8)
Wood Screws or
M5xP0.8 Machine Screws
4 Holes for Ø7/32 (5.6)
All Purpose or
M5*P0.8 Machine Screws:
4 for Closer
1/2
(13)
3/4
(19)
Hinge Edge of Door
LEFT HAND DOOR ILLUSTRATED.Same dimensions
apply for Right Hand Door measured from hinge edge.
Arm Shoe
Arm Screw and
Lockwasher
Pinion Cap
Reveal
POSITION OF ARMS
AND INDEX SETTINGS
2
3
14
Index
Mark Right hand door. Use index mark 4.
Main
Arm Locknut
Forearm
Elbow
90°
2
3
14
Index
Mark
Left hand door. Use index mark 1.
Main
Arm
Locknut
Forearm
Elbow
90°
REGULAR ARM (Standard Installation)
Closer Mounted On Pull Side of Door
Regular arm installation to 180° Opening. Arm Shoe
Arm Screw and
Lockwasher
Pinion Cap
Shaft
Speed Regulating Screws
Toward Hinge Edge of Door
1-3/4
(45)
3/4
(19)
2 Holes for Ø3/16 (4.8)
Wood Screws or
M5xP0.8 Machine Screws
4 Holes for Ø7/32 (5.6)
Wood Screws or
M5*P0.8 Machine Screws:
4 for Closer
1-1/8
(28.5)
3/4
(19)
Hinge Edge of Door
RIGHT HAND DOOR ILLUSTRATED.Same dimensions
apply for Left Hand Door measured from hinge edge.
9-1/16
(230)
2-5/8
(67)
8-1/4
(210)
Hinge Centerline
Stronger
Closer Force
Weaker Closer Force
Closing force can be changed
by rotating link arm left or
right.
The shorter distance from link
arm to hinge centerline will
make closing force stronger.
POSITION OF ARMS
AND INDEX SETTINGS
2
3
14
Index
Mark
Right hand door. Use index mark 4.
Main
Arm Locknut
Forearm
Elbow
90°
2
3
14
Index
Mark
Left hand door. Use index mark 1.
Main
Arm
Locknut
Forearm
Elbow
90°
An ASSA ABLOY Group brand
9-1/16
(230)
2-5/8
(67)
8-1/4
(210)
9610 INS-J574 2/08N
100Yale Avenue, Lenoir City, TN 37771 • Product Support Tel [phone] • Fax [phone] • www.yalecommercial.com
Yale® is a registered trademark of the respective ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their respective
owners and are mentioned for reference purposes only.These materials are protected under U.S. copyright laws.All contents current at time of publication.The ASSA ABLOY Group
companies reserve the right to change availability of any item in this catalog, its design, construction, and/or its materials. Copyright © 2008, ASSA ABLOY Group companies.
All rights reserved.Reproduction in whole or in part without the express written permission of the respective ASSA ABLOY Group company is prohibited.