ATD Tools ATD-7435A User manual

ATD-7435A
1/2-Ton Heavy-Duty Hydraulic Floor Style Transmission Jack
Owner’s Manual
Features: Specifications:
6-15/16"
28-5/16"
17-15/16"
13-3/8" 7-7/8"
13 916 15
33-5/8" 19-3/4" 7-1/2"
140.80
ATD7435A_rev_1120Made in China to ATD Tools, Inc. Specifications
Visit us at www.atdtools.com
9
1,100 lbs.

BEFORE USE
1
ve
e
3
r
r
e
SAVE THESE INSTRUCTIONS
r e e r r r e
r e
Inspect before each use.
er
PRODUCT DESCRIPTION:
ATDT ve
SAFETY INSTRUCTIONS:
10 e
v e re r
T
r r
!WARNING
CAUTION!
Figure 1 - Model ATD-7435A components
e
e
O F
r
e
e
Ar
9

3
ASSEMBLY:
OPERATION:
T e
!WARNING
MAINTENANCE:
Lowering
Check and Refill Oil
Lubrication and Cleaning
Air Venting Procedures
Lifting
Damaged Equipment
SHOULD BE REMOVED
FROM SERVICE UNTIL REPAIRED

4
Symptom Possible Causes Solu on
1. Release valve not ghtly closed.
1. Tighten release valve knob.
2. Low oil level.
2. Check and add oil. Follow “Check and ReĮll Oil”
instruc ons on Pg.3.
3. Defec ve or worn internal parts.
3. Discon nue use and contact a local repair center.
4. Load exceeds maximum
allowance.
4. Use a higher capacity jack.
1. Release valve not ghtly closed.
1. Tighten release valve knob.
2. Power unit malfunc on.
2. Discon nue use and contact a local repair center.
1. Air trapped in system.
1. Vent air out of system. Fol l ow “Air Ven ng Procedures”
on Pg.3.
2. Reservoir oil overĮlled.
2. Check and ensure proper oil level. Follow “Check and
ReĮll Oil” instruc on on Pg.3.
Check and ens ure proper oi l l evel .
Follow “Check and ReĮll Oil” instruc ons on Pg.3.
Jack will not func on properly a er tried
solu on.
Internal malfunc on or structural
damage.
Stop usage and contact an authorized repair
center.
Jack will not li the load.
Jack will not hold the load.
Jack will not descend to minimum height,
or will not remain in lowered posi on.
Jack will not li to max height.
Low oil level.
TROUBLESHOOTING
Alterations
Attachments and Adapters
Storage
Inspection
MAINTENANCE CONTINUED:

*Items not iden ed by part number are not available for replacement.
Replacement Parts for model ATD-7435A:
REPLACEMENT PARTS
A
r
D7435A
Item Part Number Description Q'ty
1 7435A-1 Power Unit Assembly 1
2 7435A-2 Rear Caster Assembly 4
3-3-A5347A5347
33 ylbmessAylbmessA eldnaHeldnaH 11
4 7435A-4 Chain 2
5 7435A-5 Saddle Bracket Assembly 2
6 7435A-6 Oil Filler Screw w/ Seal 1
N/A 7435A-L Label 1

WARRANTY
1 YEAR LIMITED WARRANTY
THIS WARRANTY AND CONFIRMED RECEIPT(S) SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
PURCHASED FROM: _______________________________________
DATE PURCHASED: ________________________________________
INVOICE/RECEIPT NUMBER: _________________________________________
Your ATD-7435A is warranted for a period of 12 months from the original purchase date.
For a period of one (1) year from your purchase date, ATD Tools, Inc. will repair or replace (at its option) without charge, your
ATD product if it was purchased new and the product has failed due to a defect in material or workmanship which you experienced
during normal use of the product. This limited warranty is your exclusive remedy.
To access the benefits of this warranty, contact your supplier, or point of sale directly. You may be advised to return the product
under warranty, freight prepaid, to your supplier for warranty determination.
If this ATD product is altered, abused, misused, modified, or undergoes service by an unauthorized technician, your warranty will
be void. We are not responsible for damage to ornamental designs you place on this ATD product and such ornamentation should
not cover any warnings or instructions or they may void the warranty. This warranty does not cover scratches, superficial dents, and
other abrasions to the paint finish that occur under normal use. It also does not cover normal wear items such as but not limited to
brushes, batteries, drill bits, drill chucks, pads or blades.
Subject to the law in your state:
(1) Your sole and exclusive remedy is repair or replacement of the defective product as described above.
(2) ATD is not liable for any incidental damages, including but not limited to, lost profits and unforeseeable consequences.
(3) The repair and replacement of this product under the express limited warranty described above is your exclusive remedy and is
provided in lieu of all other warranties, express or implied. All other warranties, including implied warranties and warranties of
merchantability or fitness for a particular purpose are disclaimed and, if disclaimer is prohibited, these warranties are limited to
one year from your date of purchase of this product.
Some states’ laws do not allow limited durations on certain implied warranties and some states’ laws do not allow limitations on
incidental or consequential damages. You should consult the law in your state to determine how your rights may vary.
[Affix receipt or invoice here for safe keeping]