Autel MaxiTPMS TBE200 User manual

MaxiTPMS®TBE100/TBE200
Quick Reference Guide
(For Generating Report)
Refer to the Quick Reference Guide for the TBE
device to perform a tire tread check or brake disc
check.
Tap Data Query from the Main Menu and tap Last
Test to view the latest test result.
Scroll up and tap Generate Report. The Generating
Report screen appears.
1
Thank you for purchasing this AUTEL tire tread & brake disc laser examiner. Our tool is manufactured to a high standard
and will give you years of trouble-free performance when used according to these instructions and properly
maintained.
Email: [email protected]
Web: www.autel.com
Generating Report
IMPORTANT: This tool is a class 3R laser product. Avoid direct eye exposure to the laser. Failure to observe
the warning may result in serious injury.
IMPORTANT: Before operating or maintaining this tool, please read the Quick Reference Guide and User
Manual for the TBE device carefully, paying extra attention to the safety warnings and precautions. Use this
tool correctly and properly. Failure to do so may cause damage and/or personal injury and will void the
product warranty.
NOTE:
To use the Generate Report and Report Query functions, you need to update the TBE device software to
V01.19.00 or later. For update details, see the Quick Reference Guide for the TBE device.
When updating software, ensure the TBE device is connected to the Internet and that its battery is charged
to at least 50 percent or it is connected to a power outlet.

Querying Report
Select or enter the vehicle information to
associate the vehicle with the test data and
tap Next to generate a report.
Note: Information marked with red asterisk (*)
is required.
2
Tap Data Query from the Main Menu and tap
Report Query to view report records.
Reports are divided into Upload complete
(successful records) and Upload incomplete
(failed records). A maximum of 10 records of
each type can be saved. You can tap a
successful record to view its corresponding
QR code; tap a failed record to view the
original test data, and tap Regenerate
Report to generate the QR code.
1
After the report is successfully generated, tap Check.
Use your mobile device to scan the QR code and download the report.
3