AVer M70Wv2 User manual

M70Wv2
Instruction Manual |安裝指南
取扱説明書| Bedienungsanleitung
Mode d'emploi | Manual de instrucciones
Manuale d'uso

English……..……………………………………………………….…......1
繁體中文……………………………………………………………….…19
日本語…..……………………………..……………………………….…35
Deutsch.............................................................................................50
Français…………………………………………………..………....…....67
Español...……………………………………………..……….…….…....84
Italiano..........…………………………….….……………..……….…....101

English-1
Package Contents
The items below are included with this product. If any item is missing, contact the dealer from whom
you purchased this product.
M70Wv2 unit Remote controller Power Adaptor
Power cord* USB Cable
AAA Batteries Quick Guide Warranty card** Wi-Fi Dongle
(Optional)
*The power cord will vary depending on the standard power outlet of the country where it is sold.
** Only for Europe, Japan, and Taiwan
Optional Accessories
Carrying Bag
Anti-glare Sheet
Microscope Adapter
( 28mm and 34mm Rubber Coupler are included)

English-2
Overview
1
3
2
45
78
9
6
14 15
1. Camera head
2. LED lighting
3. Arm
4. IR sensor
5. Control panel
6. Handle
7. Built-in MIC
8. Battery Indicator
9. USB mini port
10.USB port
11.Wi-Fi dongle
12.Anti-theft Slot
13.HDMI Input
14.HDMI Output
15.DC power jack
Compound Key
Press keys to operate the compound key function.
:Back to factory default settings.
: Press to switch between following modes:
- Auto detects the best resolution(4K, 720P, 1080P)
- 1024x768 (If HDMI device support)
- 4K 60Hz (If HDMI device support)
:Press to switch between following modes:
Norma, Motion, High quality, Microscope, Infinity, Marco

English-3
Remote Control
1
2
3
4
5
6
7
8
9
10
12
11
14
16
17
21
22
19
20
13
15
18
1
9
21
8,19
2
16
4
12
6
23
21
7
9
15
3
Name
Function
1. POWER
Turn the unit on/off/standby*.
*Standby mode is supported when power
plugged in.
2. WiFi/USB
Switch between WiFi and USB mode.
3. CAPTURE
Capture still image in Camera mode. In
continuous capture mode, press this button
again to stop.
4. FREEZE Freeze live images.
5. ROTATE
Rotate the image by 0/180° in Camera
mode.
6. INFO/ Press to view system information and
battery power status.
7. ▲,▼,◄, & ► Pan and zoom-in image in live streaming.
-
8. AUTO FOC Adjust the focus automatically.
9. ZOOM +/-
Increase/decrease the image magnification
in camera mode.
10. ZOOM 1X Reset zoom level to 100%.
11. MUTE Set the volume to mute.
12. CAMERA / PC Switch the video signal between camera
and computer from the HDMI Input port
13. RECORD
Start/Stop audio & video recording. Video
recording can only be saved in a USB flash
drive.
14. RESOULTION
Press to switch between following modes:
- Auto detects the best resolution(4K,
720P, 1080P)
- 1024x768 (If HDMI device support)
- 4K 60Hz (If HDMI device support)
15. AE LOCK Lock the exposure to stop M70Wv2
attempting to find optimal exposure.
16. LAMP Turn the overhead light on/off.
17. DEL
Delete the selected picture/video in
Playback mode.
18. MODE
Press to switch between Normal, High
frame, and High quality, Microscope,
Infinity, or Marco mode.
19. Make a selection.
20. VOLUME +/- Adjust the volume.
21. BRIGHTNESS +/- Adjust the brightness.
22. RESET +/- Reset to factory default setting.
23. WiFi indicator WiFi status indicator: Please refer to LED Indicator section.

English-4
LED Indicator
Name
Status indicator
Power Solid green: Power on
No light: Power off
Solid red: Standby mode*
*Standby mode is supported when power plugged in.
Battery Solid green(x3): Battery is full(100% ~ 60%)
Solid green(x2): Battery is 60% ~ 30%
Solid green(x1): Battery is 30% ~ 5%
Solid red (x1): Battery is 5% ~ 0%
Flashing red (x1): Battery is out of power
Solid orange(x3): Battery is abnormal
WiFi Solid blue: AP Mode Ready / STA connected
Slow flashing blue: Software connection with camera
Short flashing blue: Create AP mode / STA connecting
Solid green: Miracast mode ready
Slow flashing green: Miracast streaming start
Quick flashing green: Miracast device scan / connecting
[Note]
The battery will be exhausted for long-term usage. Do not replace the battery yourself. Please contact
your dealer.

English-5
Device Connection
Power Connection and Charging
Plug in power adapter and turn on M70Wv2.
[Note]
Please full charge the camera for the first time use.
When the camera is power on, the camera is in “Standby” mode. In standby mode, it can
be charging with the USB connection between other devices; but the power supply is
required 5V3A and the charging time will be longer.
The laptop, projector, or monitor cannot provide the power through the USB connection to
the camera while the camera is operating.
When the camera is charging with the wall outlet, the battery indicator is in green flashing.
Press + to reboot when the camera doesn't work properly.
1

English-6
USB Connection
1 Press Wi-Fi button to disable Wi-Fi mode.
Connect M70Wv2 to laptop/PC with USB port.
PC
2 Connect USB pen drive to USB port to save the recording file.
PC

English-7
HDMI Connection
1 Connect M70Wv2 to HDMI display with HDMI output port.
2 Connect M70Wv2 to laptop/PC with HDMI input port.

English-8
P2P connection via Wi-Fi Dongle(Optional)
1 Plug-in the WiFi dongle to PC/laptop and Install AVerTouch application.
AVerTouch
Wi-Fi Dongle Laptop
2 Open AVerTouch application, click to connect the camera.
[Note] Check the serial number at bottom of the camera to find your camera.
3 Click Next to continue.