AXIOMTEK GOT3187WL-834-PCT User manual

GOT3187WL-834-PCT
All-in-One
18.5” WXGA TFT Fanless
Multi-Touch PANEL PC
User’s Manual

ii
Disclaimers
This manual has been carefully checked and believed to contain accurate information.
Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third
party’s rights, and any liability arising from such use.
Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,
completeness or usefulness of any information in this document. Axiomtek does not make any
commitment to update the information in this manual.
Axiomtek reserves the right to change or revise this document and/or product at any time
without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Axiomtek Co., Ltd.
CAUTION
If you replace wrong batteries, it causes the danger of explosion. It is recommended by the
manufacturer that you follow the manufacturer’s instructions to only replace the same or
equivalent type of battery, and dispose of used ones.
Copyright 2016 Axiomtek Co., Ltd.
All Rights Reserved
July 2016, Version A1
Printed in Taiwan

iii
Safety Precautions
Before getting started, read the following important cautions.
1. Be sure to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and place all electronic components in any
static-shielded devices. Most electronic components are sensitive to static electrical
charge.
2. Disconnect the power cords from the GOT3187WL-834-PCT Series before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden
surge of power could ruin sensitive components. Make sure the GOT3187WL-834-PCT
Series is properly grounded.
3. Do not open the system’s rear cover. If opening the cover for maintenance is a must, only
a trained technician is allowed to do so. Integrated circuits on computer boards are
sensitive to static electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:
Before handling a board or integrated circuit, touch an unpainted portion of the
system unit chassis for a few seconds. This will help to discharge any static
electricity on your body.
When handling boards and components, wear a wrist-grounding strap, available
from most electronic component stores.
Trademarks Acknowledgments
Axiomtek is a trademark of Axiomtek Co., Ltd.
Windows®is a trademark of Microsoft Corporation.
IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation.
Intel®and Pentium®are trademarks of Intel Corporation.
AMI is trademark of American Megatrend Inc.
Other brand names and trademarks are the properties and registered brands of their
respective owners.

iv
Table of Contents
Disclaimers.....................................................................................................ii
Safety Precautions........................................................................................iii
Chapter 1 Introduction............................................. 1
1.1 General Description............................................................................1
1.2 Specifications......................................................................................2
1.3 Dimensions and Outlines ...................................................................4
1.4 I/O Outlets............................................................................................5
1.5 Packing List.........................................................................................6
Chapter 2 Hardware and Installation ...................... 7
2.1 CFastTM card Installation.....................................................................8
2.2 Open back cover .................................................................................9
2.3 Jumper and Switch Setting ..............................................................10
2.3.1 Auto Power On (JP7) ................................................................................ 10
2.3.2 Restore BIOS Optimal Defaults (JP8)....................................................... 10
2.3.3 COM port Connector..................................................................................11
2.4 Ethernet..............................................................................................12
2.5 Mountings: Panel / Wall / Desktop / VESA ......................................13
2.5.1 VESA-ARM/Wall-Mount ............................................................................ 13
2.5.2 Panel-mount Kit Assembly ........................................................................ 14
2.6 HDD Installation.................................................................................15
2.7 DRAM Installation..............................................................................17
2.8 Wireless LAN Card Installation........................................................18
2.9 Power Input........................................................................................20
Chapter 3 AMI BIOS Setup Utility .......................... 21
3.1 Navigation Keys ................................................................................21
3.2 Main Menu..........................................................................................22
3.3 Advanced Menu.................................................................................23
3.4 Chipset Menu.....................................................................................34
3.5 Security..............................................................................................40
3.6 Boot Menu..........................................................................................41
3.7 Save&Exit...........................................................................................42

v
Chapter 4 Drivers Installation .............................. 45
4.1 System ...............................................................................................45
4.1.1 Win 7......................................................................................................... 45
4.1.2 Win 8/8.x ................................................................................................... 46
4.2 Touch Screen.....................................................................................47
4.3 Embedded O.S...................................................................................48
4.3.1 WES 7 & WE8S......................................................................................... 48

vi
This page is intentionally left blank.

GOT3187WL-834-PCT User’s Manual
Introduction 1
Chapter 1
Introduction
This chapter contains general information and detailed specifications of the
GOT3187WL-834-PCT. Chapter 1 include the following sections:
General Description
Specifications
Dimensions and outlines
I/O Outlets
Package List
1.1 General Description
The GOT3187WL-834-PCT adopts a 18.5-inch WXGA TFT LCD with 250-nit brightness and
an Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz) to provide excellent
computing performance and thermal resistance. This fanless platform is especially designed
for operating under harsh environment including steel refinery, oil pipe, ship, machine maker
operating systems and many more. Having below abilities makes GOT3187WL-834-PCT
surely a most robust and cost-effective solution.
Extended Operating Temperature Range with Fanless & IP65 front design
GOT3187WL-834-PCT features a technology of extended operating temperature range which
allows it to work between 0°C to +40°C. It incorporates compact ID and fanless cooling system
with a low power Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz), IP65 front
bezel to prevent from liquid or dust, making the platform a power-efficient solution.
Reliable and Stable Design
The GOT3187WL-834-PCT adopts a fan-less cooling system, which makes it especially
suitable for vibration-heavy environments, best for the transportation, ship, and industrial
machinery markets. For high capacity storage requirement, GOT3187WL-834-PCT can work
under 1.0G (10 ~ 500Hz, random for CFast™) in operation mode with a patent of anti-vibration
design. The patent improves the system reliability and sustainability. (Note: Sometimes
heavy-vibration may cause the LCD screen flash with white color. It won’t affect product
function.)

GOT3187WL-834-PCT User’s Manual
2 Introduction
WLAN Antenna Supported (optional)
GOT3187WL-834-PCT has 2 PCI Express Mini Card slots for optional add-on such as wireless
LAN card for 802.11 a/b/g/n connections, 3G/GPRS application, and more. These slots also
provide 3 optional fixed rotational WLAN/3G antennas for wireless network connection.
Multi-Touch PCAP touch with 7H surface hardness
It is designed with user friendly multi-touch PCAP touch. Users can operation it directly. The
surface hardness is up to 7H and is good for anti-scratch purpose applications.
More Features
GOT3187WL-834-PCT utilizes one 204-pin DDR3L SODIMM system memory max. up to 8GB,
one SATA HDD and one CFast™or mSATA. It provides over-current protection-fuse and a
full set of I/O including RS-232/422/485, USB 2.0, USB 3.0, audio (line-out), and Gigabit
Ethernet. Additionally, this slim unit supports panel mount, wall mount (optional), VESA
mount (optional) and desktop stand (optional).
1.2 Specifications
Main CPU Board
CPU
Intel® Celeron® Processor J1900 (2M Cache, up to 2.42 GHz) onboard
System Memory
1 x 204-pin DDR3L SO-DIMM socket
Maximum memory up to 8GB
BIOS
America Megatrends BIOS
I/O System
Standard I/O
2 x RS-232/422/485
2 x USB 2.0
2 x USB 3.0
Ethernet
2 x RJ45 for Giga Ethernet (Intel i210IT)
Audio
1x Line-out
Expansion
1 x Mini-card slot (w/SIM slot)
1 x Mini-card slot (supports mSATA, optional)
Storage
1 x 2.5”SATA
1 x CFastTM slot or mSATA
Power connector
Phoenix power connector or Screw power connector

GOT3187WL-834-PCT User’s Manual
Introduction 3
System Specification
18.5”WXGA (1366x768) LCD with LED backlight
Multi-touch PCAP touch
Fanless Heat Dispensing Design
IP65 front bezel
Disk drive housing:
One 2.5”SATA drive
Net Weight
5.8 Kgs
Dimension (Main Body Size)
460.8x 58.5x 285 mm
Operation Temperature
0°C to 40°C
Relative Humidity
20% to 90% @ 40°C, Non-Condensing
System Power input
DC power input : 9~36VDC with phoenix power connector
AC power input : 12VDC, 60W power adapter
NOTE: All specifications and images are subject to change without notice.
If the operation temperature is higher than 40 ℃ , the wide temperature HDD/
CFastTM are recommended to be used on the device.

GOT3187WL-834-PCT User’s Manual
4 Introduction
1.3 Dimensions and Outlines
The following diagrams show the dimensions and outlines of GOT3187WL-834-PCT
Outline dimension: 460.8x 58.5x 285 mm
Screw Type Phoenix Connector
Cut Out dimensions: 448.74 x 273.74 mm

GOT3187WL-834-PCT User’s Manual
Introduction 5
1.4 I/O Outlets
Please refer to the following illustration for I/O locations of the GOT3187WL-834-PCT.

GOT3187WL-834-PCT User’s Manual
6 Introduction
1.5 Packing List
When you receive the GOT3187WL-834-PCT, the bundled package should contain the
following items:
GOT3187WL-834-PCT unit x 1
Driver Disc x1
Phoenix connector x 1 ( DC power version only)
Panel mount kit x 12
Screws for HDD x 4
SATA data cable x 1
SATA power cable x 1
If you can not find the package or any items are missing, please contact Axiomtek distributors
immediately.

GOT3187WL-834-PCT User’s Manual
Hardware and Installation 7
Chapter 2
Hardware and Installation
The GOT3187WL-834-PCT provides rich I/O ports and flexible expansions for you to meet
different demand, for example CF card. The chapter will show you how to install the hardware.
It includes:
CFast™Card
Open Back Cover
Jumper and Switch Setting
Ethernet
Mounting Method
Hard disk
DRAM
Wireless LAN Card
Power Input

GOT3187WL-834-PCT User’s Manual
8 Hardware and Installation
2.1 CFastTM card Installation
The GOT3187WL-834-PCT provides one CFast™slot for users to install CFast™card.
Please refer to the following instructions for installation:
Step 1 Open the CFast card slot cover, unscrew 2 screws on the chassis.
Step 2 Install the CFast card to the CFast card slot.
Step 3 Screw the CFast cover slot cover with 2 screws.

GOT3187WL-834-PCT User’s Manual
Hardware and Installation 9
2.2 Open back cover
This section tells users how to open back cover. Please follow the steps below.
Step 1 Unscrew 8 screws on the back cover. Please refer the photo below.
Step 2 Remove the back cover.

GOT3187WL-834-PCT User’s Manual
10 Hardware and Installation
2.3 Jumper and Switch Setting
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2
jumper pins to close. And remove jumper clip from 2 jumper pins to open. The following
illustration shows how to set up jumper.
Before applying power to GOT3187WL-834-PCT, please make sure all of the jumpers and
switch are in factory default position. Below you can find a summary table and onboard default
settings.
Jumper
Description
Setting
JP7
Auto Power On
Default: Disable
2-3 close
JP8
Restore BIOS Optimal Defaults (Clear CMOS)
Default: Normal Operation
1-2 close
JP6
Switches mSATA or CFastTM setting.
Default: 1-2 = CFast™, 2-3 = mSATA
1-2 close
2.3.1 Auto Power On (JP7)
If JP7 is enabled for power input, the system will be automatically power on without pressing
soft power button. If JP7 is disabled for power input, it is necessary to manually press soft
power button to power on the system.
2.3.2 Restore BIOS Optimal Defaults (JP8)
Put jumper clip to pin 2-3 for a few seconds then move it back to pin 1-2. Doing this procedure
can restore BIOS optimal defaults.
Function
Setting
Enable auto power on
1-2 close
Disable auto power on (Default)
2-3 close
Function
Setting
Normal operation (Default)
1-2 close
Restore BIOS optimal defaults
2-3 close

GOT3187WL-834-PCT User’s Manual
Hardware and Installation 11
2.3.3 COM port Connector
The pin assignment of RS-232/RS-422/RS-485 is listed on the following table.
Pin
RS-232
RS-422
RS-485
1
DCD
TX-
Data-
2
RXD
TX+
Data+
3
TXD
RX+
No use
4
DTR
RX-
No use
5
GND
GND
GND
6
DSR
No use
No use
7
RTS
No use
No use
8
CTS
No use
No use
9
RI
No use
No use

GOT3187WL-834-PCT User’s Manual
12 Hardware and Installation
2.4 Ethernet
The GOT3187WL-834-PCT has two RJ-45 connectors: LAN1 and LAN2. Ethernet connection
can be established by plugging one end of the Ethernet cable into this RJ-45 connector and
the other end (phone jack) to a 1000/100/10-Base-T hub.
Please refer to detailed pin assignment list below:
Pin
Signal
Pin
Signal
L1
MDI0+
L5
MDI2+
L2
MDI0-
L6
MDI2-
L3
MDI1+
L7
MDI3+
L4
MDI1-
L8
MDI3-
A
Active LED (Yellow)
B
100 LAN LED (Green) / 1000 LAN LED
(Orange)

GOT3187WL-834-PCT User’s Manual
Hardware and Installation 13
2.5 Mountings: Panel / Wall / Desktop / VESA
There are 4 application options for the GOT3187WL-834-PCT, Panel/Wall/Desktop/VESA
mountings.
2.5.1 VESA-ARM/Wall-Mount
The GOT3187WL-834-PCT provides VESA mount: 100x100 mm. Screw four screws to fix the
kit in the back chassis.
Wall mount kit (optional):
VESA mount:

GOT3187WL-834-PCT User’s Manual
14 Hardware and Installation
2.5.2 Panel-mount Kit Assembly
The GOT3187WL-834-PCT is designed for panel mount application. To mount the
GOT3187WL-834-PCT, the standard set of mounting kit (included in the system packaging) is
needed.