AXIOMTEK GOT615-801 User manual

GOT615-801
15.6”WXGA TFT LCD Fanless
Extended Temperature
PANEL PC
User’s Manual

ii
Disclaimers
This manual has been carefully checked and believed to contain
accurate information. Axiomtek Co., Ltd. assumes no responsibility for
any infringements of patents or any third party’s rights, and any liability
arising from such use.
Axiomtek does not warrant or assume any legal liability or
responsibility for the accuracy, completeness or usefulness of any
information in this document. Axiomtek does not make any
commitment to update the information in this manual.
Axiomtek reserves the right to change or revise this document and/or
product at any time without notice.
No part of this document may be reproduced, stored in a retrieval
system, or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior
written permission of Axiomtek Co., Ltd.
Copyright 2012 Axiomtek Co., Ltd.
All Rights Reserved
March. 2012, Version A1
Printed in Taiwan

iii
Safety Approvals
CE Marking
FCC Class B
FCC Compliance
This equipment has been tested in compliance with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are meant to provide reasonable protection against harmful
interference in a residential installation. If not installed and used in
accordance with proper instructions, this equipment might generate or
radiate radio frequency energy and cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following methods:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment to another outlet of a circuit that doesn’t
connect with the receiver.
4. Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables must be used in order to comply with the
emission limits.

iv
Safety Precautions
Before getting started, please read the following important safety
precautions.
1. The GOT615-801 does not come equipped with an operating
system. An operating system must be loaded first before
installing any software into the computer.
2. Be sure to ground yourself to prevent static charge when
installing the internal components. Use a grounding wrist strap
and place all electronic components in any static-shielded
devices. Most electronic components are sensitive to static
electrical charge.
3. Disconnect the power cord from the GOT615-801 before any
installation. Be sure both the system and external devices are
turned OFF. A sudden surge of power could ruin sensitive
components that the GOT615-801 must be properly grounded.
4. The brightness of the flat panel display will be getting weaker as
a result of frequent usage. However, the operating period varies
depending on the application environment.
5. Turn OFF the system power before cleaning. Clean the system
using a cloth only. Do not spray any liquid cleaner directly onto
the screen. The GOT615-801 may come with or w/o a
touchscreen. Although the touchscreen is chemical resistant, it
is recommended that you spray the liquid cleaner on a cloth first
before wiping the screen. In case your system comes without
the touchscreen, you must follow the same procedure and not
spray any cleaner on the flat panel directly.
6. Avoid using sharp objects to operate the touchscreen.
Scratches on the touchscreen may cause malfunction or
internal failure to the touchscreen.
7. The flat panel display is not susceptible to shock or vibration.
When assembling the GOT615-801, make sure it is securely
installed.

v
8. Do not open the system’s back cover. If opening the cover for
maintenance is a must, only a trained technician is allowed to
do so. Integrated circuits on computer boards are sensitive to
static electricity. To avoid damaging chips from electrostatic
discharge, observe the following precautions:
Before handling a board or integrated circuit, touch an
unpainted portion of the system unit chassis for a few
seconds. This will help to discharge any static
electricity on your body.
When handling boards and components, wear a wrist-
grounding strap, available from most electronic component
stores.
Trademarks Acknowledgments
Axiomtek is a trademark of Axiomtek Co., Ltd. IBM, PC/AT, PS/2,
VGA are trademarks of International Business Machines Corporation.
Intel®and Atom™are registered trademarks of Intel Corporation.
MS-DOS, Microsoft C and Quick BASIC are trademarks of Microsoft
Corporation.
VIA is a trademark of VIA Technologies, Inc.
SST is a trademark of Silicon Storage Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
Other brand names and trademarks are the properties and registered
brands of their respective owners.

vi
Table of Contents
Disclaimers....................................................................................ii
Safety Approvals...........................................................................iii
Safety Precautions........................................................................iv
CHAPTER 1 INTRODUCTION................................................................ 1
1.1 General Description .................................................... 2
1.2 Specifications.............................................................. 4
1.2.1 Main CPU Board......................................................... 4
1.2.2 I/O System .................................................................. 4
1.2.3 System Specification................................................... 5
1.3 Dimensions ................................................................. 6
1.4 I/O Outlets................................................................... 8
1.5 Packing List............................................................... 10
CHAPTER 2 HARDWARE INSTALLATION....................................... 11
2.1 Open back cover....................................................... 12
2.2 CF card Installation................................................... 14
2.3 DRAM Installation ..................................................... 16
2.4 HDD Installation........................................................ 18
2.5 Wireless LAN Card Installation (option).................... 23
2.6 Serial Ports Interface ................................................ 28
2.7 Ethernet Connector (LAN1, LAN2) ........................... 33
2.8 Mountings: VESA / WALL......................................... 35
2.8.1 VESA-ARM................................................................ 35
2.8.2 WALL mounting......................................................... 36
2.9 Power........................................................................ 38
CHAPTER 3 AMI BIOS SETUP UTILITY............................................ 39
3.1 Starting ...................................................................... 39
3.2 Navigation Keys ........................................................ 39
3.3 Main Menu ................................................................ 41
3.4 Advanced Menu........................................................ 42
3.5 Boot Menu................................................................. 53
3.6 Security Menu........................................................... 56
3.7 Chipset Menu............................................................ 57
3.8 Exit Menu.................................................................. 62
CHAPTER 4 DRIVERS INSTALLATION ......................................... 65
4.1 System ...................................................................... 65
4.2 Touch Screen............................................................ 66
4.2.1 Specification.............................................................. 66

vii
4.2.2 Driver Installation- Windows XP/WIN 7 .................... 66
4.3 Embedded O .S ........................................................ 70
4.3.1 Windows XP Embedded........................................... 70
4.4 Wake On LAN setting............................................... 71

GOT615-801 User’s Manual
Introduction
1
CHAPTER 1
INTRODUCTION
This chapter contains general information and detailed specifications
of the GOT615-801. Chapter 1 includes the following sections:
General Description
Specification
Dimensions
I/O Outlets
Package List

GOT615-801 User’s Manual
Introduction
2
1.1 General Description
The GOT615-801 adopts a 15.6-inch WXGA color TFT LCD
and low power consumption Intel® AtomTM processor D525 1.8
GHz to provide excellent computing performance and thermal
resistance.With the growing demand of wireless application, it
provides one Mini card slot.
The fanless and wireless platforms are especially designed for
operating under heavy-duty environment. The customers have instant
access wireless LAN. Including transportation, train, control platform
of ships, and oil pipe monitoring systems
Wide Operating Temperature Range
The GOT615-801 features a unique extended temperature
The temperature range from -5°C ~ +45°C, with fanless cooling
system and compact design for harsh environment.
The low power Intel®AtomTM processor D525 1.8GHz, making
the platform a power-efficient solution
Reliable and Stable Design
The GOT615-801 adopts a fan-less cooling system and a
CompactFlash™ card, which makes it especially suitable for
vibration-heavy environments, best for the transportation, ship,
and industrial machinery markets. For high capacity storage
requirement, GOT615-801 can work under 2G (5 ~ 500Hz,
random for CF card) in operation mode with a patent of anti-
vibration design. The patent improves the system reliability and
sustainability.

GOT615-801 User’s Manual
Introduction
3
WLAN Antenna Supported
The GOT615-801 provides a PCI Express Mini card slot and WLAN
antenna for wireless network connections. By simply plugging in the
wireless LAN card, customers can use the unit in a wireless
environment.
More Features
GOT615-801 utilizes one 204-pin DDR3 667/800MHz SODIMM
system memory max. up to 4GB,
One SATA HDD and one CompactFlashTM slot and CFCard interface
It provides a full set of I/O including
2 x RS-232,1x RS-232/422/485, 4 x USB 2.0, 1 x audio (line-out),
2 x Gigabit Ethernet and 1 x VGA.
Additionally, this slim unit supports VESA (option) / WALL mount.

GOT615-801 User’s Manual
Introduction
4
1.2 Specifications
1.2.1 Main CPU Board
CPU
Intel® Atom™ D525 Processor with (1M Cache, 1.8
GHz )
System Chipset
Intel○RSystem Controller Hub ICH8M
BIOS
American Megatrends Inc. BIOS 4Mbit with RPL/PXE
System Memory
One 204-pin DDR3 667/800 MHz SO-DIMM socket
Maximum memory up to 4GB
1.2.2 I/O System
Standard I/O
Two RS-232 and one RS-232/422/485
Four USB 2.0
Ethernet
1 x INTEL 82567V for Gigabit/Fast Ethernet
1 x INTEL 82583V for Gigabit/Fast Ethernet
Audio
One Line-out(Realtek ALC662)
Expansion
One of Mini PCIe Port (internal)
Storage
One slot for CF card(optional)
One SATA(optional)
Power connector
Screw type power connector
Power Rating: 12V, 2.6A
Key-pad
LCD backlight adjustment :3 keys(LCD On/Off,
Brightness Down/Up)

GOT615-801 User’s Manual
Introduction
5
1.2.3 System Specification
15.6”WXGA(1366x768) LCD with LED backlight
5-wire resistive Touch Screen(Higgestec)
Fanless Heat Dispensing Design
IP65, NEMA 4 rugged protection, aluminum front bezel
Disk drive housing:
One 2.5” SATA drive
Net Weight : 3.38kgs
Dimension (Main Body Size)
390x240x59.5
Operation Temperature
-5°C ~ +45°C
Relative Humidity
10% to 90% @ 40℃, Non-Condensing
Power input
12VDC with screw type power connector
Power Rating: 12V, 2.6A
NOTE All specifications and images are subject to change
without
NOTE If the operation temperature is higher than 40 ℃ , the wide
temperature DRAM is recommended to be used on the
device.

GOT615-801 User’s Manual
Introduction
6
1.3 Dimensions
The following diagrams show the dimensions and outlines of
GOT615-801.

GOT615-801 User’s Manual
Introduction
7

GOT615-801 User’s Manual
Introduction
8
1.4 I/O Outlets
Please refer to the following illustration for I/O locations of the
GOT615-801.

GOT615-801 User’s Manual
Introduction
9

GOT615-801 User’s Manual
Introduction
10
1.5 Packing List
When you receive the GOT615-801, the bundled package should
contain the following items:
GOT615-801 unit x 1
Driver CD x1
Adapter x 1
Screws M2x3L x 1
Screws M6B x 2
Screws M3x4L x 8
CF Mylar x 1
HDD_Bracket x 1
WALL mount bracket
If you can not find the package or any items are missing, please
contact Axiomtek distributors immediately.

GOT615-801 series User’s Manual
Hardware Installation
11
CHAPTER 2
HARDWARE INSTALLATION
The GOT615-801 provides rich I/O ports and flexible expansions for
you to meet different demand, for example, CF card. The chapter will
show you how to install the hardware. It includes:
CompactFlash ™Card
Serial Port
Ethernet
Mounting Method
Hard disk
DRAM
Wireless LAN Card (option)

GOT615-801 User’s Manual
Hardware Installation
12
2.1 Open back cover
This section tells users how to open back cover. Please follow the
steps below.
Step 1 Unscrew 8 screws on the back cover. Please refer the
photo below.

GOT615-801 series User’s Manual
Hardware Installation
13
Step 2 Remove the back cover.