AXIOMTEK GOT3126T-834 User manual

GOT3126T-834
All-in-One
12.1”XGA TFT Fanless
PANEL PC
User’s Manual

ii
Disclaimers
This manual has been carefully checked and believed to contain accurate information.
Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third
party’s rights, and any liability arising from such use.
Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,
completeness or usefulness of any information in this document. Axiomtek does not make any
commitment to update the information in this manual.
Axiomtek reserves the right to change or revise this document and/or product at any time
without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Axiomtek Co., Ltd.
CAUTION
If you replace wrong batteries, it causes the danger of explosion. It is recommended by the
manufacturer that you follow the manufacturer’s instructions to only replace the same or
equivalent type of battery, and dispose of used ones.
Copyright 2015 Axiomtek Co., Ltd.
All Rights Reserved
March 2015, Version A1
Printed in Taiwan

iii
Safety Precautions
Before getting started, read the following important cautions.
1. Be sure to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and place all electronic components in any
static-shielded devices. Most electronic components are sensitive to static electrical
charge.
2. Disconnect the power cords from the GOT3126T-834 Series before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden
surge of power could ruin sensitive components. Make sure the GOT3126T-834 Series is
properly grounded.
3. Do not open the system’s top cover. If opening the cover for maintenance is a must, only
a trained technician is allowed to do so. Integrated circuits on computer boards are
sensitive to static electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:
Before handling a board or integrated circuit, touch an unpainted portion of the
system unit chassis for a few seconds. This will help to discharge any static
electricity on your body.
When handling boards and components, wear a wrist-grounding strap, available
from most electronic component stores.
Trademarks Acknowledgments
Axiomtek is a trademark of Axiomtek Co., Ltd.
Windows®is a trademark of Microsoft Corporation.
IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation.
Intel®and Pentium®are trademarks of Intel Corporation.
AMI is trademark of American Megatrend Inc.
Other brand names and trademarks are the properties and registered brands of their
respective owners.

iv
Table of Contents
Disclaimers.....................................................................................................ii
Safety Precautions........................................................................................iii
Chapter 1 Introduction............................................. 1
1.1 General Description............................................................................1
1.2 Specifications......................................................................................2
1.3 Dimensions and Outlines ...................................................................4
1.4 I/O Outlets............................................................................................6
1.5 Packing List.........................................................................................7
Chapter 2 Hardware and Installation ...................... 9
2.1 Open back cover ...............................................................................10
2.2 CFast card Installation......................................................................11
2.3 Jumper and Switch Setting ..............................................................12
2.4 Ethernet..............................................................................................23
2.5 Mountings: Panel / Wall / Desktop / VESA ......................................24
2.6 HDD Installation.................................................................................26
2.7 DRAM Installation..............................................................................28
2.8 mSATA Card Installation...................................................................29
2.9 Wireless LAN Card Installation ........................................................30
2.10 Power Input........................................................................................32
Chapter 3 AMI BIOS Setup Utility .......................... 33
3.1 Navigation Keys ................................................................................33
3.2 Main Menu..........................................................................................34
3.3 Advanced Menu.................................................................................35
3.4 Chipset Menu.....................................................................................44
3.5 Security..............................................................................................47
3.6 Boot Menu..........................................................................................48
3.7 Save&Exit...........................................................................................49
Chapter 4 Drivers Installation .............................. 51
4.1 System ...............................................................................................51
4.1.1 Win 7 (64bit).............................................................................................. 51

v
4.1.2 Win 8/8.x ................................................................................................... 52
4.2 Touch Screen.....................................................................................53
4.2.1 Specification.............................................................................................. 53
4.2.2 Driver Installation- Windows 7/8.x............................................................. 53
4.3 Embedded O.S...................................................................................55
4.3.1 WES 7 & WE8S......................................................................................... 55

vi
This page is intentionally left blank.

GOT3126T-834 User’s Manual
Introduction 1
Chapter 1
Introduction
This chapter contains general information and detailed specifications of the GOT3126T-834.
Chapter 1 includes the following sections:
General Description
Specification
Dimensions and outlines
I/O Outlets
Package List
1.1 General Description
The GOT3126T-834 adopts a 12.1-inch XGA TFT LCD with 600nits brightness and an Intel®
Processor E3827 (1M Cache, 1.75 GHz) to provide excellent computing performance and
thermal resistance. This fanless platform is especially designed for operating under
heavy-duty environment including steel refinery, oil pipe, machine maker operating systems
and many more. Having below abilities makes GOT3126T-834 surely a most robust and
cost-effective solution.
Wide Operating Temperature Range
GOT3126T-834 features a technology of wide operating temperature range which allows it to
work between -20°C to +55°C. It incorporates compact ID and fanless cooling system with a
low power Intel® Processor E3827, making the platform a power-efficient solution.
Reliable and Stable Design
The GOT3126T-834 adopts a fanless cooling system, which makes it especially suitable for
vibration-heavy environments, best for the transportation and industrial machinery markets.
For high capacity storage requirement, GOT3126T-834 can work under 2.0G (10 ~ 500Hz,
random for CFast™) in operation mode with a patent of anti-vibration design. The patent
improves the system reliability and sustainability.

GOT3126T-834 User’s Manual
2 Introduction
WLAN Antenna Supported (optional)
GOT3126T-834 has 2 PCI Express Mini Card slots for optional add-on such as wireless LAN
card for 802.11 a/b/g/n connections, 3G/GPRS application, and more. These slots also
provide 3 optional fixed rotational WLAN/3G antennas for wireless network connection.
More Features
GOT3126T-834 utilizes one 204-pin DDR3L SO-DIMM system memory max. up to 8GB, one
2.5”SATA HDD and one CFast™ or mSATA. It provides over-current protection-fuse and a
full set of I/O including RS-232/422/485, USB 2.0, USB 3.0, audio (line-out), and Gigabit
Ethernet. Additionally, this slim unit supports panel mount, wall mount (optional), VESA
mount and desktop stand (optional).
1.2 Specifications
Main CPU Board
CPU
Intel® Processor E3827 (1M Cache, 1.75 GHz) onboard
System Memory
One 204-pin DDR3L SO-DIMM socket
Maximum memory up to 8GB
BIOS
America Megatrends BIOS
I/O System
Standard I/O
3 x RS-232/422/485 (adjust setting via BIOS)
2 x USB 2.0
2 x USB 3.0
1 x VGA output
(Duplicated display mode: max resolution is up to 1024 x 768, Extended display mode:
max resolution is up to 1920 x 1080)
Ethernet
2 x RJ45 for Giga Ethernet (Intel chipset)
Audio
1x Line-out
Expansion
1 x SATA 2
1 x Mini-card slot (w/SIM slot)
1 x Mini-card slot (supports mSATA, optional)
Storage
1 x 2.5”HDD/SSD bay
1 x CFastTM slot or mSATA
Power connector
Phoenix power connector

GOT3126T-834 User’s Manual
Introduction 3
System Specification
12.1”XGA (1024x768) LCD with LED backlight, 600nits(before touch)
5-wire resistive touch
Fanless Heat Dispensing Design
IP65 aluminum front bezel
3 keys OSD on front panel
Disk drive housing:
1 x 2.5”SATA drive
Net Weight
2.8 Kgs
Dimension (Main Body Size)
311.8 x 56.9 x 250.3 mm
Operation Temperature
-20℃to 55℃
Relative Humidity
10% to 90% @ 40℃, Non-Condensing
System Power input
DC power input : 9~36VDC with phoenix power connector
NOTE: All specifications and images are subject to change without notice.

GOT3126T-834 User’s Manual
4 Introduction
1.3 Dimensions and Outlines
The following diagrams show the dimensions and outlines of GOT3126T-834
Outline dimension: 311.8 x 56.9 x 250.3mm

GOT3126T-834 User’s Manual
Introduction 5
Cut Out dimension: 301.8 x 240.2mm
Product drawing

GOT3126T-834 User’s Manual
6 Introduction
1.4 I/O Outlets
Please refer to the following illustration for I/O locations of the GOT3126T-834.
Front panel 3 keys OSD:
I/O connectors
No
Function
No
Function
1
POWER SWITCH (ATX)
6
COM 1 (RS-232/422/485)
2
Power Input connector (phoenix type)
7
COM 2 (RS-232/422/485)
3
2 x USB 2.0
8
2 X Ethernet
4
VGA output
9
2 X USB 3.0
5
COM 3 (RS-232/422/485)
10
AUDIO (LINE-OUT)

GOT3126T-834 User’s Manual
Introduction 7
1.5 Packing List
When you receive the GOT3126T-834, the bundled package should contain the following
items:
GOT3126T-834 unit x 1
Driver Disc x1
Phoenix connector x 1
Panel mount kit x 6
Screws for HDD x 4
SATA data cable x 1
SATA power cable x 1
If you can’t find the package or any items are missing, please contact Axiomtek distributors
immediately.

GOT3126T-834 User’s Manual
8 Introduction
This page is intentionally left blank.

GOT3126T-834 User’s Manual
Hardware and Installation 9
Chapter 2
Hardware and Installation
The GOT3126T-834 provides rich I/O ports and flexible expansions for you to meet different
demand, for example CFast™card. The chapter will show you how to install the hardware. It
includes:
Open Back Cover
CFast™Card
Jumper and Switch Setting
Ethernet
Mounting Method
Hard disk
DRAM
Wireless LAN Card
Power Input

GOT3126T-834 User’s Manual
10 Hardware and Installation
2.1 Open back cover
This section tells users how to open back cover. Please follow the steps below.
Step 1 Unscrew 10 screws on the back cover. Please refer the photo below.
Step 2 Remove the back cover.

GOT3126T-834 User’s Manual
Hardware and Installation 11
2.2 CFast card Installation
The GOT3126T-834 provides one CFast slot for users to install CFast™card. Please refer to
the following instructions for installation:
Step 1 Unscrew a screw on the cover of CFast™card slot on left side.
Step 2 Find the CFast card.
Step 3 Insert it into the socket.
Step 4 Close the cover of CFast™card slot and fix it. Installation completes.

GOT3126T-834 User’s Manual
12 Hardware and Installation
2.3 Jumper and Switch Setting
Jumpers and Connectors Layout
Component Side

GOT3126T-834 User’s Manual
Hardware and Installation 13
Solder Side

GOT3126T-834 User’s Manual
14 Hardware and Installation
Jumper Settings
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2
jumper pins to close. And remove jumper clip from 2 jumper pins to open. The following
illustration shows how to set up jumper.
Making the proper jumper settings configure the SBC87834 to match the needs of your
application. The following table shows the default jumper settings for the onboard devices.
Jumper
★Default Setting
Jumper Setting
JP1
★Panel backlight control PWM mode
Panel backlight control DC mode
Short 1-2
Short 3-4
JP2
Touch Controller 4,8 WIRE
★Touch Controller 5 WIRE
Short 1-2
Short 2-3
JP4
★LVDS Panel Power : 3.3V
LVDS Panel Power : 5V
Short 1-2
Short 2-3
JP5
Touch OFF
★Touch ON
Short 1-2
Short 2-3
JP6
★PCIe device
mSATA device
Short 1-2
Short 2-3
JP7
AT mode
★ATX mode
Short 1-2
Short 2-3
JP8
★Normal
Clear CMOS
Short 1-2
Short 2-3
JP11
COM3_5VSB
★COM3_5V
Short 1-2
Short 2-3
JP12
★COM1 normal mode
COM1 pin1 with power :+5V
COM1 pin9 with power :+12V
Short 3-5,4-6
Short 1-3,4-6
Short 3-5,2-4
JP13
★COM2 normal mode
COM2 pin1 with power :+5V
COM2 pin9 with power :+12V
Short 3-5,4-6
Short 1-3,4-6
Short 3-5,2-4
JP14
★COM3 normal mode
COM3 pin1 with power :+5V
COM3 pin9 with power :+12V
Short 3-5,4-6
Short 1-3,4-6
Short 3-5,2-4