baby&child BMTLFULL 105284 User manual

Model No.#105284 BMTLFULL
Description: INDUSTRIAL L CKER
ST RAGE BUNK BED MTL FULL
Page 1 of 9
Made in India
Distributed in the USA by
Restoration Hardware
11640 Harrel St, Suite B
Mira Loma CA 91752
rhbabyandchild.com
Distributed in Canada by :
Restoration Hardware Canada Inc.
1500-1055 West Georgia Street,
Vancouver, British Columbia V6E 4N7
WARNING
WARNINGWARNING
WARNING : Read all Instructions before
assembling this product. KEEP INSTRUCTI NS
KEEP INSTRUCTI NS KEEP INSTRUCTI NS
KEEP INSTRUCTI NS
F R FUTURE USE.
F R FUTURE USE.F R FUTURE USE.
F R FUTURE USE.
CUST MER SERVICE
CUST MER SERVICECUST MER SERVICE
CUST MER SERVICE
If you are missing parts or have any questions about this product, contact us first. You can also order parts
by writing to the address above. Include the product model number, color, and a brief description of the
part. Call 1-800-762-1751.
CARE AND CLEANING
CARE AND CLEANINGCARE AND CLEANING
CARE AND CLEANING
D N T
D N T D N T
D N T scratch or chip the finish. D N T
D N T D N T
D N T use abrasive chemicals for cleaning. Dust often using a clean, soft
dry cloth. If the Bunk bed is to be stored, store in a cool dry place and carefully package all original hardware
to protect from loss.
All Restoration Hardware beds are designed to meet the highest safety standards
and comply with all U.S. and Canadian beds and beds regulations.

Page 2 of 9
IMP RTANT SAFETY INF RMATI N F R BUNK BED
IMP RTANT SAFETY INF RMATI N F R BUNK BEDIMP RTANT SAFETY INF RMATI N F R BUNK BED
IMP RTANT SAFETY INF RMATI N F R BUNK BED
WARNING:
WARNING:WARNING:
WARNING:
T HELP PREVENT SERI US R FATAL INJURIES FR M
T HELP PREVENT SERI US R FATAL INJURIES FR M T HELP PREVENT SERI US R FATAL INJURIES FR M
T HELP PREVENT SERI US R FATAL INJURIES FR M
ENTRAPMENT R FALLS:
ENTRAPMENT R FALLS:ENTRAPMENT R FALLS:
ENTRAPMENT R FALLS:
1. NEVER ALL W A CHILD UNDER 6 YEARS N UPPER BUNK.
WIDE N
UPPER BUNK (FULL SIZE).
4. ENSURE THICKNESS F MATTRESS N T P BUNK D ES N T EXCEED 9”
AND MATTRESS SURFACE IS AT LEAST 5 INCHES BEL W UPPER EDGE F
GUARD RAILS.
5. USE GUARD RAILS N B TH SIDES F UPPER BUNK.
6. PR HIBIT H RSEPLAY N R UNDER BED(S)
7. PR HIBIT M RE THAN NE PERS N N UPPER BUNK.
8. USE LADDER F R ENTERING AND LEAVING UPPER BUNK.
9. IF THE BUNK BED WILL BE PLACED NEXT T A WALL TH E GUARD RAIL
THAT RUNS THE FULL LENGTH F THE BED SH ULD BE PLACED AGAINST
THE WALL T PREVENT ENTRAPMENT BETWEEN THE BED AND THE WALL.
STRANGULATI N HAZARD :
- NEVER ATTACH R HANG ITEMS T ANY PART F THE BUNK BED THAT
ARE N T DESIGNED F R USE WITH THE BED, F R EXAMPLE BUT N T
LIMITED T H KS, BELTS AND JUMP R PES.
-D N T REM VE THIS LABEL.
D N T REM VE THIS LABEL.D N T REM VE THIS LABEL.
D N T REM VE THIS LABEL.
1. Follow the information on the WARNINGS appearing on the upper bunk and structure and on the
carton. D N T REM VE WARNING LABEL FR M BED.
2. Always use the specified size mattress on upper bunk or mattress support, or both to help prevent the
likelihood of entrapment or falls.
3. Surface of mattress must be at least 5” below the upper edge of guardrails on the top bunk.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on upper bunk.
6. Periodically check and ensure that the guardrails, ladder and other components are in their proper
position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact Restoration Hardware for replacement parts.
10. Use of a night light may provide added safety precaution for a child using the upper bunk.
11. Use guardrails on both sides of the upper bunk.
12. If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be
placed against the wall to prevent entrapment between the bed and the wall.
13. The use of water flotation mattresses is prohibited.
14. STRANGULATI N HARZARD – Never attach or hang items on any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to, hooks, belts, and jump ropes.
15. Keep the instructions for future preference.
2. USE ONLY MATTRESS WHICH IS 74"-75" LONG AND 52.5"-53.5"
WIDE N
L WER BUNK (FULL SIZE).
3. USE ONLY MATTRESS WHICH IS 74"-75" LONG AND 52.5"-53.5"

Page 3 of 9
PARTS LIST
Please note, the Ladder End Panel on the Upper Bunk is interchangeable to allow placement of the Ladder on either
end of the Bunk.
(1) Complete Lower Bunk Bed Box - 1 pc.
(2) Headboard With 2 Leg Posts - 1 pc.
(3) Top Bunk Ladder End Panel (Interchangeable) - 1 pc.
(4) Ladder End Panel Metal Connecting Rail - 1 pc.
(5) Ladder End Metal Posts - 2 pcs.
(6) Top Bunk Stretcher End Bars (wooden) - 2 pcs.
(7) Top Bunk Stretcher Bar Mid Supports (wooden) - 2 pcs.
(8) Top Platform Panel –3 pcs.
(9) Top Bunk Side Guardrail - 2 pcs.
(10) Metal Connector Brackets - 8 pcs.
(11) Metal Ladder - 1 pc.
ASSEMBLY INSTRUCTI NS
(1) (2) (3) (4)
(5) (6) (7)
(8) (9) (10)
(11)

Page 4 of 9
HARDWARE LIST
HARDWARE LISTHARDWARE LIST
HARDWARE LIST
Hexagonal Bolt.
Hex Wrench.
Short Allen Bolt 30mm L
Long Allen Bolts 65mm L
Allen Key 4mm
Short Screw 8x19mm
T LS NEEDED
T LS NEEDEDT LS NEEDED
T LS NEEDED
Philips Head Screwdriver (Not Included)
ASSEMBLY INSTRUCTI NS
ASSEMBLY INSTRUCTI NSASSEMBLY INSTRUCTI NS
ASSEMBLY INSTRUCTI NS
N TE:
N TE:N TE:
N TE:
-Bed must be assembled by at least two people
-Please read instructions carefully before assembling bed.
-Use the above parts and fittings list to identify each
component.
-Keep all packing material until assembly is complete to avoid
loss of smaller parts.
-Do not completely tighten all bolts until all steps are finished.
-It may be helpful to use 2 wood blocks underneath the lower
Bunk Bed Box (1) to keep Bed Box off the ground during
assembly (not provided).
No. ITEM DESCRIPTI N QUANTITY
A
B
C
D
E
F
64 pcs.
1 pc.
8 pcs.
1 pc.
2 pcs.
36 pcs.

Page 5 of 9
ASSEMBLY INSTRUCTI NS
ASSEMBLY INSTRUCTI NSASSEMBLY INSTRUCTI NS
ASSEMBLY INSTRUCTI NS
STEP 1:
STEP 1: STEP 1:
STEP 1:
Place the Bottom Bunk Box (1) on the 2 x optional wood support blocks for easier assembly. See Detail 1.
(#1)
Wood/other type of block holders for ease of
assembly (Not Provided).
STEP 2:
STEP 2: STEP 2:
STEP 2:
Connect Metal Connector Brackets (#10) as shown at the four corners of the bottom bunk bed using 4
Hexagonal Bolts (A) and Hex Wrench (B) provided. Please do not completely tighten the bolts until final
assembly is complete. See Detail 2.
(#10)
DETAIL 2
DETAIL 2DETAIL 2
DETAIL 2
DETAIL 1
DETAIL 1DETAIL 1
DETAIL 1

Page 6 of 9
ASSEMBLY INSTRUCTI NS
ASSEMBLY INSTRUCTI NSASSEMBLY INSTRUCTI NS
ASSEMBLY INSTRUCTI NS
STEP 3:
STEP 3: STEP 3:
STEP 3:
STEP 4:
STEP 4: STEP 4:
STEP 4:
n the opposite end of the Bunk, insert Ladder End Posts (5) into the corners of the Metal Connector Brackets
(please make sure to match the marked labels AA/BB on leg posts/bottom bunk)
(10) on the Lower Bunk Bed Box (1). Fix in place using 4 Hexagonal Bolts (A) on each bracket and Hex Wrench
(B) provided. Then, connect 1 Metal Connector Bracket (10) to each Ladder End Post (5) using 4 Hexagonal
Bolts (A) on each bracket and Hex Wrench (B) provided. See Detail 4 below.
(#10)
(#5)
DETAIL 3
DETAIL 3DETAIL 3
DETAIL 3
DETAIL 4
DETAIL 4DETAIL 4
DETAIL 4
A
B
A
B
ower Bunk Bed Box (1). Insert the bottoms of the Leg Posts on
Headboard (2) into the corners of the Metal Connector Brackets (10) and fix the legs using 4 Hexagonal Bolts (A)
on each bracket with Hex Wrench (B) provided. Please do not completely tighten the bolts until final assembly is
complete. See Detail 3 below.
The ladder can be placed on either end of the bunk.
Decide on which end of the bunk you want to position the ladder and attached Headboard (2) to the opposite end.
Attach the Headboard with 2 Leg Posts (2) to L

Page 7 of 9
ASSEMBLY INSTRUCTI NS
ASSEMBLY INSTRUCTI NSASSEMBLY INSTRUCTI NS
ASSEMBLY INSTRUCTI NS
STEP 5:
STEP 5: STEP 5:
STEP 5:
Attach the Ladder End Panel Connecting Rail (4) to the Metal Connector Brackets fixed on the Ladder End
Posts (5) using 2 Hexagonal Bolts (C) and Hex Wrench (B) provided. See Detail 5
(#4)
DETAIL 5
DETAIL 5DETAIL 5
DETAIL 5
DETAIL 6
DETAIL 6DETAIL 6
DETAIL 6
(#3)
STEP 6:
STEP 6: STEP 6:
STEP 6:
Insert the Top Bunk Ladder End Panel (3) into the Ladder End Posts (5) as shown and fix in place with 2 Short
Allen Bolts 30mm (C) and Allen Key (E). See Detail 6.
Top Bunk Ladder End Panel (3) is reversible, allowing you to position the ladder towards the back of the bunk or
or close to the front of the bunk, depending on your preference.

Page 8 of 9
ASSEMBLY INSTRUCTI NS
ASSEMBLY INSTRUCTI NSASSEMBLY INSTRUCTI NS
ASSEMBLY INSTRUCTI NS
STEP 7:
STEP 7: STEP 7:
STEP 7:
Attach the Top Bunk Side Guardrails (9) one at a time as shown below in Detail 7. Align each Top Bunk Side
Guardrail with the inside of the Ladder End Post (5) and Headboard with 2 Leg Posts (2). Fix in place using 8
Long Allen Bolts (D) and Allen Key (E). Return to tighten all bolts on Bunk to a snug fit. Do not over tighten. .
(#9)
STEP 8:
STEP 8: STEP 8:
STEP 8:
Lay the Top Bunk Stretcher End Bars (6) on either end of the Bunk between the Top Bunk Side Guardrails (9).
Position the Top Bunk Stretcher Bar Mid Supports (7) in between the End Bars (2). See Detail 8. Secure all 5
Stretcher Bars (6, 7) using Short Screws (F) and Phillips Head Screwdriver (not provided.) Then, lay the Top
Platform Panels (8) on top of the Stretcher Bars (6, 7), and secure using Short Screws (F) and Phillips Head
Screwdriver (not provided).
(#6)
(#7)
DETAIL 7
DETAIL 7DETAIL 7
DETAIL 7
DETAIL 8
DETAIL 8DETAIL 8
DETAIL 8

Page 9 of 9
ASSEMBLY INSTRUCTI NS
ASSEMBLY INSTRUCTI NSASSEMBLY INSTRUCTI NS
ASSEMBLY INSTRUCTI NS
STEP 9:
STEP 9: STEP 9:
STEP 9:
Hook the Metal Ladder (#11) to the top of the Ladder End Panel Metal Connecting Rail (#4) and the Complete
Lower Bunk Bed Box (#1), below ladder opening in the Top Bunk Ladder End Panel (#3).
IMP RTANT: The center Hexagonal Bolt (A) will need to be removed
IMP RTANT: The center Hexagonal Bolt (A) will need to be removedIMP RTANT: The center Hexagonal Bolt (A) will need to be removed
IMP RTANT: The center Hexagonal Bolt (A) will need to be removed from the top joint behind the ladder (See
from the top joint behind the ladder (See from the top joint behind the ladder (See
from the top joint behind the ladder (See
Detail 9).
Detail 9).Detail 9).
Detail 9).
(#11)
DETAIL 9
DETAIL 9DETAIL 9
DETAIL 9
DETAIL 10
STEP 10:
STEP 10:STEP 10:
STEP 10:
The following size mattress and Foundations are specified for us
The following size mattress and Foundations are specified for usThe following size mattress and Foundations are specified for us
The following size mattress and Foundations are specified for use with
e withe with
e with
this Bunk Bed:
this Bunk Bed: this Bunk Bed:
this Bunk Bed:
UPPER BUNK MATTRESS DIMENSI NS:
UPPER BUNK MATTRESS DIMENSI NS: UPPER BUNK MATTRESS DIMENSI NS:
UPPER BUNK MATTRESS DIMENSI NS:
UPPER BUNK PLATF RM :
UPPER BUNK PLATF RM : UPPER BUNK PLATF RM :
UPPER BUNK PLATF RM :
-
--
-Note : MATTRESS THICKNESS MUST N T EXCEED MAX 9
Note : MATTRESS THICKNESS MUST N T EXCEED MAX 9Note : MATTRESS THICKNESS MUST N T EXCEED MAX 9
Note : MATTRESS THICKNESS MUST N T EXCEED MAX 9”
””
”
Be sure to adhere to these BEDDING SPECIFICATI NS in order to avoid the possibility
of falling or entrapment. THESE SPECIFICATI NS MUST BE STRICTLY ADHERED T !
Thank you for your purchase
www.rhbabyandchild.com
Upper Bunk Bed - 74-75" L x 52.5-53.5" W x 9" H
Consists of 3 pcs Platform 55" L x 23" W x 3/4" H