baby&child ARIANE User manual

Phillips screws M4x20mm
Plastic brackets
Restraint straps
Phillips screws M4x30mm
Plastic anchors
T O O L S N E E D E D
- Phillips head screwdriver (not provided)
NO. ITEM DESCRIPTION QTY.
1
2
3
4
4pcs
2pcs
5
4pcs
4pcs
4pcs
PARTS INCLUDED
A [1] DRESSER
B [4] FOOT
A
B
ASSEMBLY INSTRUCTION
Note: On the bottom of the dresser are holes with pre-installed nuts
that correspond to the threaded rods pre-installed in the legs.
1. Align and insert the threaded rod of the leg into the hole and
turn clockwise to tighten. Please see sketch below.
2. Attach one of the mounting brackets near the top back edge of
the furniture piece by inserting the shorter screws.
3. Determine the final position of the furniture piece. Mark
location on the wall approximately 2" below the bracket
mounted to the back of the furniture.
4. Drill a starter hole into the wall stud. If wall stud is not available,
drill a hole into the wall and insert plastic anchor. Gently tap the
anchor until the flange of the anchor is flush with the wall.
5. Attach the second bracket by inserting the longer screw
through the bracket and into the wall.
6. Place the furniture so the bracket on the back edge is in line
with the bracket in the wall.
7. Lace one end of the nylon restraint strap down through each
bracket. Bring both ends together and slide the beaded end until
it snap locks into the keyhole slot.
8. To double lock; return the beaded end back through the
keyholes as shown.
9. Check to make sure the Restraint strap is securely laced and
locked to the brackets.
A
B

WARNING:
FALL HAZARD - To prevent death or serious injury from falls, always keep child within arm's reach. NEVER LEAVE CHILD
UNATTENDED and always use restraining system.
This changing table is intended for use with children weighing up to 30 pounds.
Ariane dresser topper will be used with Ariane dresser (sold separately) with size 45"W x 21"D x 33"H.
Cushion pad size is 32"L x 16"W x 4"H.
Do not use the Ariane dresser or Ariane dresser topper if damaged or broken.
Customer Service- If you are missing parts or have any questions about this product, please contact us at: 1-800-762-1751
IMPORTANT SAFETY INSTRUCTIONS:
Please read all instructions before use of the Dresser or Topper.
For your safety, assembly by two or more adults is recommended. Keep instructions for future use.
PRE-ASSEMBLY:
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
Remove all parts and hardware from the box and lay out on a carpeted or scratch-free work surface. The shipping box
provides an ideal work surface. Do not dispose of any contents until assembly is completed to avoid accidentally
discarding small parts or hardware.
Use the parts on the hardware list to identify and separate each of the pieces included prior to starting assembly.
Note: Do not fully tighten the screws until all parts are in place. Failure to follow these instructions may cause the
screws to misalign during assembly.
If using power tools to aid in assembly please use caution. Power tools can damage hardware or split wood.
PARTS INCLUDED:
A [1] Dresser Topper
HARDWARE INCLUDED:
B [2] Metal Brackets
C [8] Wood Screws 7x15mm

CARE INSTRUCTIONS:
1. Dust often using a clean, soft, dry lint-free cloth.
2. Blot spills immediately, and wipe with a clean, damp cloth.
3. We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
ASSEMBLY INSTRUCTIONS:
To connect Ariane Dresser Topper (A) to Ariane dresser, place (2) Metal Brackets (B) over the pre-drilled holes on back
of topper and secure to dresser with [8] Wood Screws (C).
B
C