Bay Tek Games Big Bass Wheel User manual

R. SCHREIBER
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 1

1 32
2 33
3 34
4 35
5 36
6 3
38
9 38
10 40
10 41
11 52
15 53
1 54
55
18 56
19 58
20 59
21 60
22 61
23 62
24 63
25 64
2 65
28 66
6
29 68
29 69
30 69
31 0TOTAL CREDITS PARTS
MOTOR WATCHDOG ERROR WARRANTY OPTIONS
SOFTWARE VERSION REPAIR OR NON-WARRANTY PARTS
NOTES
DOOR OPEN WARNING TECHNICAL SUPPORT
PLAYER TIMEOUT MAINTENANCE CHECKLIST
GAME HISTORY REPAIR LOG
TICKET PATTERNS ARM BRACKET MAINTENANCE
AVAILABLE PATTERNS CIRCUIT BOARD WIRING PIN OUT
ATTRACT VOLUME CLEANING THE WINDOWS
RESET STATISTICS POWER SUPPLY DIAGNOSTICS
CREDITS PER GAME
ADJUSTING THE BRAKE
GAME VOLUME REMOVING THE HANDLE
RESET TICKETS ADJUSTING THE WHEEL SENSOR
RESET CREDITS BRAKE ADJUSTMENT
ACCESS THE OPERATOR MENU LIMIT SWITCH MAPPING
ENCODER WHEEL SENSOR
SETTING UP YOUR GAME SOFTWARE UPGRADE LOG
KEY COMPONENTS DOOR OPEN ERROR
SERVICE CONNECTIONS TOTAL MOTOR ASSISTS
POWER REQUIREMENTS TROUBLESHOOTING GUIDE
SAFETY PRECAUTIONS TOTAL TICKETS
INSPECTING THE GAME TICKETS PER GAME
BRAKE STATUS
ABOUT THE GAME WHEEL SPEED
GAME MEASUREMENTS TOTAL GAMES
TABLE OF CONTENTS
NEW GAME REGISTRATION TICKETS LEFT TO DISPENSE
OUR VISION WHEEL POSITION
INSTALLATION INFORMATION INPUTS AND OUTPUTS
SERVICE FIRST NETWORK
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 2

NEW GAME REGISTRATION
www.baytekgames.com
Pulaski, WI 54162
Fax: [phone]
Phone: [phone]
Game Owner/Operator E-Mail Address:
Game Location Name and Address:
Bay Tek Games Inc.
1077 East Glenbrook Dr.
Game Name (one game per form) : Date:
Game Serial Number
(located on the back of the cabinet) :
Game Owner/Operator Company Name:
Game Owner/Operator Address:
Game Owner/Operator City/State/Zip:
Game Owner/Operator Phone Number:
Game Owner/Operator Fax Number:
*NOTE: Extended warranty only applies if ALL boxes on this form are complete.
One game per form. Extended warranty does not apply to used or close-out games.
REGISTERING YOUR NEW GAME ENTITLES YOU TO AN EXTENDED WARRANTY*
ADD 3 MONTHS TO THE WARRANTY OF THIS GAME BY COMPLETING AND SUBMITTING THIS
FORM BY FAX OR MAIL.
Game Location Type
Please Check One:
Family Fun Center
Sports Bar
Mall
Restaurant
Laundromat
Movie Theatre
Bar
Other (please specify)
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 3

OUR VISION
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 4

E-Mail: [email protected] Sales: 920. 22.3951
INSTALLATION INFORMATION
Game Serial Number
(Located on the back of the cabinet, see figure below.)
Installed by
Bay Tek Games Inc.
1077 East Glenbrook Dr.
Service: 920. 22.3951 EXT. 1102
Parts: 920. 22.3951 EXT. 1101
Fax: [phone]
Service Fax: [phone]
Pulaski, WI 54162
www.baytekgames.com
Date of Installation
SUITABLE FOR INDOOR USE ONLY
Model: AAGM-1234
Software Version: 5-6 8
Game Serial Number: 9-1234
PCB Serial Number: 56 , 89
Manufacture Date: /0 /200
Inspected By: R.S.
GAME
VOLTAGE
AMUSEMENT
MACHINE
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 5

SERVICE FIRST NETWORK
Join our exclusive
Service First Network
To keep you up to date on the latest information,
early notification of parts specials, technical bulletins,
updates on retro fit parts, software upgrades,
and much more!
If you are not already a member,
sign up for this free service today at:
www.baytekgames.com
SERVICE FIRST NETWORK
CONTACT INFO
Fax directly to service department:
[phone]
8 A.M. - 5 P.M. CST
MON. - FRI.
Comments / Questions:
[phone] ext. 1101
8 A.M. - 5 P.M. CST
MON. - FRI.
Email :
[email protected]
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 6

ABOUT THE GAME
REEL IN the fun with Big Bass Wheel™ from
Bay Tek Games.
Players step up and pull the handle to spin the big wheel.
When the wheel stops, players are awarded with tickets.
For an even bigger catch – a Big Bass Bonus has been added
to the wheel where players can win up to
1000 tickets* for their perfect spin!
This game serves as a true attraction piece, as the big wheel
offers great eye-appeal for any location, while funny fishing
bloopers provide added laughs & entertainment for the entire
family!
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page

GAME MEASUREMENTS
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 8

SAFETY PRECAUTIONS
DANGER
DO NOT perform repairs or maintenance on this game with
the power ON. Unplug the unit from the wall outlet or shut
off the power at the power strip located inside the game
cabinet.
WARNING
Use of flammable substances can cause severe burns or
serious injury. Always use
NON-FLAMMABLE solvents for cleaning.
DO NOT use gasoline, kerosene, or thinners.
CAUTION
Lifting heavy objects can cause back, neck, or other injuries.
Be sure adequate lifting and moving devices are available
when unloading, unpacking, and moving this game.
CAUTION
TO AVOID POSSIBLE INJURY,
DO NOT REMOVE ANY GUARDS!
SERVICE TO BE PERFORMED BY AUTHORIZED
PROFESSIONAL TECHNICIANS ONLY!
ALL POWER TO THE GAME MUST BE TURNED OFF!
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 9

SAFETY PRECAUTIONS
BIG BASS WHEEL HAS THREE ACRYLIC SHIELDS INSIDE THE GAME TO PROTECT AGAINST
PERSONAL INJURY.
THESE GUARDS MUST REMAIN ON AT ALL TIMES.
IF GAME REPAIR IS REQUIRED, SERVICE SHOULD BE PERFORMED BY
AUTHORIZED PROFESSIONAL TECHNICIANS ONLY.
THESE GUARDS ARE CLEARLY DECALED AND
SHOULD REMAIN ON THE GAME AT ALL TIMES.
THESE GUARDS AND DECALS REQUIRE A REGULAR MAINTENANCE INSPECTION
(1 TIME PER WEEK MINIMUM) AND SHOULD BE REPLACED AS NECESSARY.
BEHIND RIGHT SIDE DOOR
BEHIND RIGHT FRONT DOOR
INSIDE CASH BOX
PLACEMENT
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 10

INSPECTING THE GAME
Inspect the game for any damage, loose, or missing parts.
If damage is found please contact the carrier first. Then contact
Bay Tek Games at 920.822.3951 or e-mail at
[email protected]
to order replacement parts.
PARTS INCLUDED:
2 SIDE GUARD SAFETY "FINS"
- RIGHT SIDE PART NUMBER WABBW0070
- LEFT SIDE PART NUMBER WABBW0071
-FISH HEAD HARDWARE
AAKIT-BBW-HDWR
(4) A5BOHH060
(4) A5WAFL060
(4) A5WASI010
(9) A5SCFH050
-SAFETY GUARDS HARDWARE
AAKIT-BBW1-HDWR
(8) A5BOCG140
(9) A5NUHX060
(9) A5WASI010
(1) A5BOHH115
(2) A5WAFL060
1 VACUUM FORM FISH HEAD
1 MONITOR ASSEMBLY
1 BOBBER ASSEMBLY
1 POWER CORD
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 11

SERVICE CONNECTIONS / POWER REQUIREMENTS
All Bay Tek games are 110V unless specifically ordered 220V.
The game will draw 2-3 AMPS at start up.
Outlets should be rated for 20 AMPS or higher.
The game voltage can be found on the serial number decal, see below.
ATTENTION
If the supply cord is damaged, it must be replaced by a
special cord or assembly available from the manufacturer or
its service agent.
ATTENTION
Always plug this game into a grounded circuit.
ATTENTION
Be sure the electrical power matches the game
requirements. See the serial number decal located on the
back of the game cabinet.
SUITABLE FOR INDOOR USE ONLY
Model: AAGM-1234
Software Version: 5-6 8
Game Serial Number: 9-1234
PCB Serial Number: 56 , 89
Manufacture Date: /0 /200
Inspected By: R.S.
GAME
VOLTAGE
WILL BE HERE
AMUSEMENT
MACHINE
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 12

SETTING UP YOUR GAME
USING TWO PEOPLE, PLACE
THE MONITOR UNIT ON TOP OF
THE GAME CABINET.
THERE ARE HOLES ON THE
UNIT THAT WILL LINE UP WITH
HOLES ON TOP OF THE GAME
CABINET.
PLUG IN THE MONITOR CABLES.
THE OTHER TWO CABLES ARE
FOR THE BOBBER.
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 13

SETTING UP YOUR GAME
USE THE BOLTS PROVIDED TO
MOUNT THE MONITOR UNIT TO
THE CABINET.
USE A /16" SOCKET.
USING TWO PEOPLE,
SET THE FISH HEAD ON THE
GAME. THE FRONT END OF THE
FISH WILL HANG OVER THE
MONITOR.
IF YOU CHOOSE TO USE THE
BOBBER ASSEMBLY, RUN THE
PIPE AND CABLES DOWN
THROUGH THE FISH HEAD.
THERE IS A WOODEN HOLDER
THAT THE PIPE WILL SIT IN
BEHIND THE MONITOR.
PLUG THE BOBBER CABLES
INTO THE TAN CONNECTORS
COMING FROM THE GAME.
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 14

SETTING UP YOUR GAME
IF YOUR GAME WAS SHIPPED
WITHOUT THE HANDLE
ATTACHED:
RETRIEVE THE HANDLE,
REMOVE THE MOUNTING BOLT
AND LOCKNUT.
INSERT THE HANDLE INTO THE
FRONT CONTROL BRACKET.
FROM INSIDE THE GAME,
INSERT THE BOLT THROUGH
THE BRACKET ARM AND
HANDLE.
SECURE USING THE LOCKNUT.
USE THE FLAT HEAD SCREWS
TO SECURE THE FISH HEAD TO
THE CABINET AT THE SIDES
AND BACK.
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 15

SETTING UP YOUR GAME
SAFETY SIDE GUARDS:
THE FACTORY REQUIRES BOTH
GUARDS ARE FASTENED TO
THE GAME AT ALL TIMES. THE
SAFETY GUARDS HELP
PROTECT AGAINST POSSIBLE
INJURY. THE FACTORY ALSO
REQUIRES THESE GUARDS
ARE INSPECTED WEEKLY BY
AUTHORIZED PERSONNEL.
EVERY WEEK CHECK THE
BOLTS AND LOCKNUTS TO
ENSURE TIGHTNESS.
ON BOTH SIDES OF THE
CABINET THERE ARE A TOTAL
OF 8 HOLES USED TO MOUNT
THE SAFETY SIDE GUARDS.
PLACE THE BOLT THRU THE
HOLE IN THE GUARD, THROUGH
TO THE CABINET.
ON THE INSIDE OF THE
CABINET ADD ONE FLAT
WASHER, ONE SPLIT WASHER
AND ONE LOCKNUT TO SECURE
THE BOLT, SEE DIAGRAM.
SLIDE THE FRONT GLASS
CLOSED.
LATCH THE GLASS SECURE.
YOUR GAME IS READY FOR
PLAY.
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 16

KEY COMPONENTS
LOCATED
BEHIND THE
LEFT SIDE
ACCESS DOOR
LOCATED
BEHIND THE
LEFT SIDE
FRONT
DOOR
LOCATED BEHIND THE RIGHT SIDE
FRONT DOOR.
INCLUDES THE RAM AND FLASH DRIVE.
THE FLASH DRIVE MAY VARY DEPENDING
ON THE MANUFACTURE DATE OF YOUR
GAME.
EARLY MODELS MAY HAVE A CARD
WHILE THE LATEST MODELS HAVE A
STICK.
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 1

KEY COMPONENTS
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 18

ACCESS THE OPERATOR MENU
BIG BASS WHEEL™ IS EQUIPPED WITH AN ONSCREEN OPERATOR MENU.
THIS MENU WILL ALLOW YOU TO CONTROL ALL THE GAME FEATURES AND
SETTINGS ALONG WITH MONITORING THE STATISTICS.
TO ACCESS THE OPERATOR
MENU OPEN THE LEFT SIDE
TICKET DOOR.
THE MENU BUTTONS ARE
LOCATED INSIDE OF THE DOOR.
PRESS "MENU" TO ACCESS THE
OPERATOR MENU ON THE
GAME DISPLAY IN THE FISH
HEAD.
USE THE "SELECT" BUTTON TO
CHANGE THE FUNCTIONS.
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 19

RESET TICKETS
RESET TICKETS
CLEARS TICKETS LEFT TO DISPENSE TO ZERO.
THIS WILL NOT RESET THE MECHANICAL COUNTERS IN THE GAME.
THE FOLLOWING PAGES WILL SHOW THE SCREEN SHOTS OF
THE OPERATOR MENU AND GAME INFORMATION.
USE THE LEFT AND RIGHT RED BUTTONS TO NAVIGATE THE MENU.
BAY TEK GAMES, INC. BIG BASS WHEEL SERVICE MANUAL Page 20