Bay Tek Games SiNK iT SHOOTOUT User manual

1

2
FACTORY CONTACT INFORMATION
BAY TEK GAMES INC.
Pulaski Industrial Park
1077 East. Glenbrook Drive
Pulaski, WI 54162 USA
JOIN OUR SERVICE FIRST NETWORK!
This free service is intended to keep you up to date on the latest game information, early
notication of parts specials, pertinent technical bulletins, updates on retro t parts, software
upgrades, and much more.
Log on to: www.baytekgames.com/parts
then click on the Parts N’ Service tab, or scan the QR code to the right with your Smartphone
to jump straight to this game’s parts page!
PARTS
P: 920.822.3951 X 1101
F: 920.822.1496
E: [e-mail]
MON - FRI
8 AM - 5 PM C.S.T.
SERVICE
P: 920.822.3951 X 1102
F: 920.822.1496
E: [e-mail]
SALES
P: 920.822.3951
F: 920.822.8936
E: [e-mail]
All games are proudly manufactured at our factory in Pulaski, Wisconsin, USA
Scan here!

3
TABLE OF CONTENTS
FACTORY CONTACT INFORMATION ..............................2
WELCOME TO: Sink It ..........................................4
HOW TO PLAY ................................................5
SPECIFICATIONS..............................................6
SAFETY PRECAUTIONS ........................................6
QUICK SETUP GUIDE ..........................................7
HEAD TO HEAD CONNECTION ...............................8-10
DIP SWITCH SETTINGS .......................................11
MAIN MENU FUNCTIONS ......................................12
CLEAR CREDITS ........................................12
GAME SETUP ...........................................13
TICKET PATTERNS ......................................14
DIAGNOSTICS MENU ....................................15
MACHINE SETUP ........................................16
REPORTS ..............................................17
SOFTWARE UPDATE .....................................18
MAINBOARD PINOUT ......................................19-21
MINIGEN PINOUT.............................................22
WIRING DIAGRAMS........................................23-27
TROUBLESHOOTING GUIDE ................................28-34
POWER SUPPLY DIAGNOSTICS ................................35
BILL ACCEPTOR DIAGNOSTICS.................................36
HOW TO: ACCESS MAINBOARD ................................37
HOW TO: REMOVE BALL SENSOR ..............................38
HOW TO: REMOVE CUP ASSEMBLY .............................39
HOW TO: ACCESS CAMERA/ LIGHT .............................39
CREDIT CARD READER .......................................40
PARTS LISTS .............................................41-43
MAINTENANCE LOG ..........................................44
TECHNICAL SUPPORT ........................................45
WARRANTY .................................................46

4
WELCOME TO: Sink It!
Congratulations on your Sink ItTM purchase!
A family-friendly twist on our original Beer Pong Master game, Sink It is the perfect
addtion to any ticket redemption game room.
The fun ball-tossing action and competive nature of Sink It will have players lining up!
Please take a moment to read through this manual and be sure to contact our factory if
you have any questions or would like some more information.
Thank you for your purchase! Your business is important to us and we hope you enjoy
this game as much as we do!
Your Friends at Bay Tek Games
GAME INSPECTION
Inspect the game for any damaged, loose, or missing parts.
If damage is found, please contact your freight carrier rst.
Then, contact Bay Tek Games’ Service Department at 920.822.3951
or e-mail them at [email protected] for further assistance.

5
HOW TO PLAY
Insert credits and select 1- or 2-player with the
buttons on the front of the games.
(Single games will not have the
2-player button)
Toss or bounce the balls into the cups, trying
to hit all 10 cups and turn o the blue lights
inside before your opponent!
Win tickets for your skills!

6
GAME SPECIFICATIONS
SAFETY PRECAUTIONS
WEIGHT
NET WEIGHT 475 LBS.
SHIP WEIGHT 525 LBS.
DIMENSIONS
WIDTH 30”
DEPTH 71”
HEIGHT 77”
OPERATING TEMPERATURE
FAHRENHEIT 80-100
CELSIUS 26.7-37.8
POWER REQUIREMENTS
INPUT VOLTAGE
RANGE
100 to 120
VAC /220 to 240 VAC
INPUT FREQUENCY
RANGE 50 HZ / 60 HZ
MAX START UP
CURRENT
OPERATING
CURRENT
1 AMPS @ 115 VAC 1.5 AMPS @ 115 VAC
0.5 AMPS @ 230 VAC .75 AMPS @ 230 VAC
DANGER
DO NOT perform repairs or maintenance on this game with the power ON.
Unplug the unit from the wall outlet or shut off the power strip located inside the cabinet.
!!
NOTICE
Modications to the mechanical, electrical and structural components of this game
may void its compliance certications.
!!
WARNING
Use of ammable subtances can cause sever burns or serious injury.
Always use NON-FLAMMABLE solvents for cleaning. DO NOT use gasoline kerosene or thinners.
!!
CAUTION
Lifting heavy objects can cause back, neck or other injuries. Be sure adequate lifting and moving
devices are available when unloading, unpacking and moving this game.
!!
ATTENTION
Be sure the electrical power matches the game requirements. See the serial number located on the
back of the game cabinet. Always plug into a grounded circuit. If the supply cord is damaged, it must
be replaced by an approved cord or assembly provided by the manufacturer.
!!
IN CASE OF EMERGENCY
UNPLUG THE POWER CORD.
The power cord must be accessible at all times in case of an emergency.
!!
This appliance is not suitable for installation in an area where a water jet could be used.

7
QUICK SET UP GUIDE
Place the game near its nal location. Open the stor-
age compartment by unlocking the front metal and
sliding the bounce platform forward.
Ensure the balls didn’t bounce out of the trough
during transport.
No more than 20 balls should be in the
machine at a time for proper function
Sink It uses 38-40 mm
ping pong balls
Plug the power cord (located in the storage compart-
ment) into the game and a standard 110v outlet, then
switch the power strip inside the front door to the on
position.
The game may require a camera calibration after
shipping. See page 15 for instructions.

8
HEAD TO HEAD CONNECTION
Place two games next to each other and pull out the
bounce platforms.
Locate the grey phone cables inside each compart-
ment connected to the auxillary board shown. The
boards are connected to the motherboard via USB.
Feed the cable through the hole in the back of the
cabinet, and repeat in other cabinet
Plug the cables from each game into each other, clip
the excess cable into the harnesses provided, then
push the cabinets together.

9
HEAD TO HEAD CONNECTION
Secure the cabinets together with included bolts,
washers and locknuts.
One set of holes is located inside the coin door of
the left game and the ticket door of the right game.
The other set of holes is inside the back doors.

10
HEAD TO HEAD CONNECTION
Place the marquee on top of the two games,
centering it between them.
Secure with included wood screws.
Open the back door of game one and locate the
marquee cable near the upper left corner. Plug
in the cable and close the door, making sure the
cable rests in the notch in the door and doesn’t
get pinched.

11
DIP SWITCH SETTINGS
The dip switch bank is located on the minigen board
under the bouncing platform; open the front door, then
slide the platform towards you.
*factory default settings are highlighted below
SWITCH DESCRIPTION OFF ON
1Enable Tickets
2 New Jersey compliance
3 Do Not Adjust
4 Do Not Adjust

12
MAIN MENU
Press the MENU BUTTON inside the
front door to enter the main menu.
Scroll through the options by pressing
the MENU BUTTON and make your
selection with the MENU SELECT button.
The blue and red player buttons also scroll
through the menus.
CLEAR CREDITS & TICKETS
START TEST GAME AFTER EXIT
CLEAR HIGH SCORES
Press MENU/SELECT when Clear Credits is highlighted to reset the available credits and
tickets owed to 0.
Selecting this option will start a test game after exiting the menu.
Selecting this option will start clear the high scores screen.

13
GAME SETUP
SETTINGS OPTIONS & FACTORY DEFAULTS
Credits per Play 0 1 2 3 4 5 6 7 8
DBA Additional Games Gives additional games for $ bill denominations (default is 0-o)
CC Charge Games/Swipe OFF ON
CC Add Games/Swipe 012345678
Game Time
(seconds) 30 60 90 120 150 180
Balls Per Game 10 20 30 40 50 60
Extra Last Ball Delay
(seconds) never 10 15 20 25 30
Ticket Patterns see next page
Divide Tickets by 2 OFF ON
(pays out 1 paper ticket per 2 tickets won)

14
TICKET PATTERNS
PATTERN
AVERAGE
TICKETS
PER GAME
NUMBER OF CUPS HIT
0-3 4-6 7-9 10
TICKETS
12-3 1 2 3 5
26-10 4 6 10 18 (+1 per remaining ball)
310-13 8 10 16 24 (+1 per remaining ball)
414-16 8 12 16 30 (+1 per remaining ball)
517-20 10 14 20 32 (+1 per remaining ball)
621-26 14 20 26 38 (+1 per remaining ball)
727-30 20 26 32 38 (+1 per remaining ball)
831-35 20 28 40 64 (+1 per remaining ball)
936-40 24 34 44 60 (+1 per remaining ball)
10 41-45 28 38 48 60 (+1 per remaining ball)
11 55-60 42 54 66 80 (+1 per remaining ball)
12 61-65 50 60 70 90 (+1 per remaining ball)
13 70-75 56 68 80 100 (+1 per remaining ball)
14 RAFFLE 0 0 0 1
FIXED TICKET PAYOUTS
15 1
16 2
17 3
18 4
19 6
20 8
21 10
22 15
23 20
24 25
25 30
26 50

15
DIAGNOSTICS MENU
7 8
4
9
5
2
10
6
3
1

16
REPORTS MENU
These reports will help you to determine the earmings, payout and overall
number of plays generated by your Beer Pong game.

17
SOFTWARE UPDATE

18
MAINBOARD PINOUT DIAGRAM
 

 

 

 

 

 

 





















 

   

  

 


















































































  

  

  
  
  
  
  
  


  

     
 

19
MAINBOARD PINOUT GUIDE
19
Pin Type Purpose Ref Pin #
LOWSIDE
#1,w diode J22 1
LOWSIDE #2,
w diode J22 2
LOWSIDE #3 J22 3
LOWSIDE #4 J22 4
LOWSIDE #5 J22 5
LOWSIDE #6 J22 6
LOWSIDE #7 J22 7
LOWSIDE #8 J22 8
LOWSIDE #9 J22 9
+12 Volts J22 11
+12 Volts J22 12
+12 Volts J22 13
+12 Volts J22 14
+12 Volts J22 15
+12 Volts J22 16
HIGHSIDE Mechanical Count #1 Game J25 1
HIGHSIDE Mechanical Count #2 Ticket J25 2
PX10 Service Button #1 J25 3
PX11 Service Button #2 J25 4
Ground Ground for Service Buttons J25 5
Ground
Ground for Mechanical Count #1
& # 2 J25 6
+12 Volts Coin Door Power J6 1
PA05 Coin Input J6 2
Ground Coin Ground J6 3
=Low Side Driver
=High Side Driver
= TTL Input/Output
= LED Constant Current Drive
= 12 Volts
= Ground
Pin Type Purpose Ref Pin #
Ground J24 1
Ground J24 2
+12 Volts J24 3
+12 Volts J24 4
PB7 Ball Dispense Sen- J24 5
LOWSIDE #12 Select Red Light J24 6
PX29 Ball Trough Sensor J24 7
HIGHSIDE #10 Scroll Blue Light J24 8
HIGHSIDE #11 Ball Release Dis- J24 9
3.3V J24 10
PX37 Ticket Notch #1 J5 1
Ground Ground for Ticket J5 2
PB18 Ticket Motor #1 J5 3
+12 Volts Power for Ticket Dis- J5 4
PB16 Low Ticket Switch J9 1
Ground Ground for Low Tick- J9 2
PB17 Coin/DBA Lockout J9 3
+12 Volts J9 4
PA06 DBA Input J8 1
+12 Volts J8 2
Ground J8 3
Ground J8 4

20
MAINBOARD PINOUT GUIDE
20
+12 Volts J29 1
+12 Volts J29 2
+12 Volts J29 3
PA21 J29 4
PA23 J29 5
PA22 J29 6
PA25 J29 7
PA24 J29 8
PA27 J29 9
PA26 J29 10
PC0 J29 11
PA28 J29 12
PX20 J29 13
PC1 Cup 1 Lights J29 14
PX21 Cup 2 Lights J29 15
PB0 Cup 3 Lights J29 16
PX22 Cup 4 Lights J29 17
PB1 Cup 5 Lights J29 18
PX24 Cup 6 Lights J29 19
PX23 Cup 7 Lights J29 20
PX26 Cup 8 Lights J29 21
PX25 Cup 9 Lights J29 22
PX28 Cup 10 Lights J29 23
Ground J29 24
Ground J29 25
Ground J29 26
Pin Type Purpose Ref Pin #
PB19 J21 1
PX39 J21 2
PX00 J21 3
PX01 J21 4
PB20 J21 5
PX02 J21 6
PB21 J21 7
PB22 J21 8
PB23 J21 9
PB24 Credit Card Reader Input J21 10
Ground J21 11
Ground J21 12
Ground J21 13
Ground J21 14
+12 Volts J21 15
+12 Volts J21 16
+12 Volts J21 17
+12 Volts J21 18
PB25 Select Switch J21 19
PB26 Game Start Switch J21 20
Driver 1 J12 1
Driver 2 J12 2
+12 Volts J12 3
Driver 3 J12 4
Driver 4 J12 5
+12 Volts J12 6
Driver 5 J11 1
Driver 6 J11 2
+12 Volts J11 3
Driver 7 J11 4
Driver 8 J11 5
+12 Volts J11 6
Driver 9 J13 1
Driver 10 J13 2
+12 Volts J13 3
Driver 11 J13 4
Driver 12 J13 5
+12 Volts J13 6
Driver 13 J14 1
Driver 14 J14 2
+12 Volts J14 3
Driver 15 J14 4
Driver 16 J14 5
+12 Volts J14 6
Pin Type Purpose Ref Pin # =Low Side Driver
=High Side Driver
= TTL Input/Output
= LED Constant Current Drive
= 12 Volts
= Ground