Bay Tek Games SWISH User manual

1

2
FACTORY CONTACT INFORMATION
BAY TEK GAMES INC.
Pulaski Industrial Park
1077 East. Glenbrook Drive
Pulaski, WI 54162 USA
JOIN OUR SERVICE FIRST NETWORK!
This free service is intended to keep you up to date on the latest
game information, early notication of parts specials, pertinent
technical bulletins, updates on retro t parts, software upgrades,
and much more.
Log on to: www.baytekgames.com/parts
then click on the Parts N’ Service tab, or scan the QR code to
the right with your Smartphone to jump straight to this game’s
parts page!
PARTS
P: 920.822.3951 X 1101
F: 920.822.1496
E: [e-mail]
MON - FRI
8 AM - 5 PM C.S.T.
SERVICE
P: 920.822.3951 X 1102
F: 920.822.1496
E: [e-mail]
SALES
P: 920.822.3951
F: 920.822.8936
E: [e-mail]
All games are proudly manufactured at our factory in Pulaski, Wisconsin, USA
Scan here!
GAME INSPECTION
Inspect the game for any damaged, loose, or missing parts. If damage is found, please
contact your freight carrier rst. Then, contact Bay Tek Games’ Service Department at
920.822.3951 or e-mail them at [email protected] for further assistance.

3
TABLE OF CONTENTS
FACTORY CONTACT INFORMATION ..............................2
WELCOME TO: SWISH .........................................4
HOW TO PLAY ................................................5
SPECIFICATIONS..............................................6
SAFETY PRECAUTIONS ........................................6
DIP SWITCH SETTINGS ........................................7
MAIN MENU FUNCTIONS .......................................8
CREDIT/TICKET CLEAR....................................8
CREDITS PER PLAY.......................................9
TICKET PATTERNS .......................................9
GAME VOLUME ..........................................9
ATTRACT VOLUME .......................................9
TICKET PATTERNS ......................................10
MERCY TICKETS ........................................10
DIVIDE BY 2 TICKET DISPENSE ............................10
FIXED TICKET PAYOUT ...................................11
STORED CREDITS/ TICKETS OWED ........................11
GAME TIME.............................................11
STATISTICS ............................................12
RESET STATS...........................................12
RESET FACTORY DEFAULTS ..............................12
MAIN BOARD PINOUT GUIDE................................13-15
WIRING DIAGRAMS........................................16-19
TROUBLESHOOTING GUIDE ................................20-22
POWER SUPPLY DIAGNOSTICS ................................23
DBA DIAGNOSTICS ...........................................24
PARTS LIST .................................................25
PARTS PICTURES ............................................26
DECAL IDENTIFICATION .......................................27
MAINTENANCE LOG ..........................................28
TECHNICAL SUPPORT ........................................29
WARRANTY .................................................30

4
WELCOME TO: SwishTM
Congratulations on your SwishTM purchase!
Newly redesigned and ready to slam dunk, SwishTM makes a great addition to any
gameroom. With cool, modern graphics and classic game play, this mini basketball free
throw machine is sure to make the winning shot!
Please take a moment to read through this manual and be sure to contact our factory if
you have any questions, or would like some more information.
Thank you for your purchase! Your business is important to us and we hope you enjoy
this game as much as we do!
Your Friends at Bay Tek Games
GAME INSPECTION
Inspect the game for any damaged, loose, or missing parts.
If damage is found, please contact your freight carrier rst.
Then, contact Bay Tek Games’ Service Department at 920.822.3951
or e-mail them at [email protected] for further assistance.

5
HOW TO PLAY
Coin up and hit the start button to release
the basketballs.
Shoot as many hoops as you can in the
time allotted! Hurry! In the last 10 seconds,
baskets are worth 3 points!
Grab your tickets and play again!

6
GAME SPECIFICATIONS
SAFETY PRECAUTIONS
WEIGHT
SHIP WEIGHT 350 LBS
DIMENSIONS
WIDTH 32”
DEPTH 67.25”
HEIGHT 77.58”
OPERATING
TEMPERATURE
FAHRENHEIT 80-100
CELSIUS 26.7-37.8
POWER REQUIREMENTS
INPUT VOLTAGE
RANGE
100 to 120
VAC /220 to 240 VAC
INPUT FREQUENCY
RANGE 50 HZ / 60 HZ
MAX START UP
CURRENT
OPERATING
CURRENT
1.5 AMPS @ 115 VAC 0.7 AMPS @ 115 VAC
0.75 AMPS @ 230 VAC .35 AMPS @ 230 VAC
DANGER
WARNING
CAUTION
ATTENTION
IN CASE OF EMERGENCY
DO NOT perform repairs or maintenance on this game with the power ON.
Unplug the unit from the wall outlet or shut off the power strip located inside the
cabinet.
Use of ammable subtances can cause sever burns or serious injury.
Always use NON-FLAMMABLE solvents for cleaning. DO NOT use gasoline kero-
sene or thinners.
Lifting heavy objects can cause back, neck or other injuries. Be sure adequate lift-
ing and moving devices are available when unloading, unpacking and moving this
game.
Be sure the electrical power matches the game requirements. See the serial num-
ber located on the back of the game cabinet. Always plug into a grounded circuit. If
the supply cord is damaged, it must be replaced by an approved cord or assembly
provided by the manufacturer.
UNPLUG THE POWER CORD.
The power cord must be accesible at all times in case of an emergency.
!!
!!
!!
!!
!!

7
DIP SWITCH SETTINGS
The dip switch bank is located on the mainboard,
inside the front door of the game.
*factory default settings are highlighted below
SWITCH DESCRIPTION OFF ON
1 not used
2Jersey: Stored Coin/DBA lockout &
Tickets/Credits owed
3 not used
4 not used

8
MAIN MENU FUNCTIONS
1. Press the “MENU” button and hold
for 3 seconds to enter the menu
2. Scroll through the options with the
“SELECT” button
3. Make your selection with the
“MENU” button and scroll through
each sub-menu’s options
4. Press the “SELECT” button to
make your selection and exit the
menu
MENU DESCRIPTION
N1 Coins / Credits per Play
N2 Game Volume
N3 Attract Volume
N4 Attract Timing
N5 Ticket Pattern
N6 Mercy Tickets
N7 Divide by Two Ticket Dispense
N8 Fixed Ticket Payout
N9 Stored Credits / Tickets Owed
N10 Game Time
N11 Statistics
N12 Reset Statistics
N13 Diagnostics
N14 Ball Gate Mech Test
N15 Restore Factory Settings
CLEAR CREDITS/ TICKETS OWED
Press and hold both buttons together for one second
until the display shows the software version number.

9
N1- COINS/CREDITS PER PLAY
N2- GAME VOLUME
N3- ATTRACT VOLUME
012345678
Scroll through the N1 menu with the “MENU” button.
Make your selection with the “SELECT” button.
The factory settings are highlighted below.
Scroll through the N2 menu with the “MENU” button.
Make your selection with the “SELECT” button.
The factory settings are highlighted below.
0 1 2 3 4 5 6 7
Scroll through the N3 menu with the “MENU” button.
Make your selection with the “SELECT” button.
The factory settings are highlighted below.
0 1 2 3 4 5 6 7
N4- ATTRACT TIMING
30
sec
1
min
5
min
10
min
15
min
0
(off)
Scroll through the N4 menu with the “MENU” button.
Make your selection with the “SELECT” button.
The factory settings are highlighted below.
This setting determines how often the attract loop audio is played.

10
N5- TICKET PATTERNS
Scroll through the N5 menu with the “MENU” button.
Make your selection with the “SELECT” button.
The factory settings are highlighted below.
TICKET
PATTERN
POINTS
0-2 3-5 6-8 9-12 13-17 18-23 24-30 31-37 38-44 45-99
TICKETS
0no tickets
10011223345
20112345678
31122334456
41122345678
512345678910
63344556677
72 2 4 4 6 8 10 12 14 16
82 4 6 8 10 12 14 16 18 20
N6- MERCY TICKETS
Scroll through the N6 menu with the “MENU” button.
Make your selection with the “SELECT” button.
The factory settings are highlighted below.
0 1 2 3 4 5 6 7 8 9
When enabled, mercy tickets are awarded when zero points are scored.
N7- DIVIDE BY TWO TICKET DISPENSE
1
(ON)
0
(OFF)
Scroll through the N7 menu with the “MENU” button.
Make your selection with the “SELECT” button.
The factory settings are highlighted below.
This setting will halve the number of tickets dispensed, in the case that 1 physical ticket is worth 2 in
your location.
This setting truncates the value, so a score of 5 tickets will yield 2 physical tickets (5/2=2).

11
N8- FIXED TICKET PAYOUT (JERSEY)
Scroll through the N8 menu with the “MENU” button.
Make your selection with the “SELECT” button.
The factory settings are highlighted below.
This setting will make the game dispense the selected number of tickets no matter the player’s score.
If not set to 0 (off), this setting overrides N5 and N6.
01234567891011 12 13 14 15
N9- STORED CREDITS/ TICKETS OWED
N10- GAME TIME
Scroll through the N9 menu with the “MENU” button.
Make your selection with the “SELECT” button.
The factory settings are highlighted below.
This setting will cause the game to “remember” stored credits and tickets owed in the case of a
power loss or game shutdown.
Setting DIP 2 to ON will override this function.
1
(ON)
0
(OFF)
Scroll through the N10 menu with the “MENU” button.
Make your selection with the “SELECT” button.
The factory settings are highlighted below.
SECONDS
30 45 60 75 90

12
N11- GAME STATISTICS
Scroll through the N15- menu with the “MENU” button.
Make your selection with the “SELECT” button.
The factory settings are highlighted below.
The game statistics will scroll through on the display in numerical order.
S1 TOTAL GAMES PLAYED
S2 TOTAL TICKETS DISPENSED
S3 AVERAGE TICKETS PER GAME
S4 SCORING BUCKET 1
S5 SCORING BUCKET 2
S6 SCORING BUCKET 3
S7 SCORING BUCKET 4
S8 SCORING BUCKET 5
S9 SCORING BUCKET 6
S10 SCORING BUCKET 7
S11 SCORING BUCKET 8
S12 SCORING BUCKET 9
S13 SCORING BUCKET 10
N12- RESET STATISTICS
Press and hold the “SELECT” button until the display reads “CL”.
All statistics in N15 will be reset back to 0.

13
N15- RESTORE FACTORY SETTINGS
Press and hold the “SELECT” button until the display reads “dE”.
All game settings will be restored to their factory defaults, which are
highlighted in this manual.
N13- DIAGNOSTICS
The diagnostics mode will help you troubleshoot problems and allow you to determine if all inputs are
working correctly.
The display will show “-” when no inputs or switches are activated.
Once one or more inputs are activated, their symbols alternate on the display (see the chart below).
Scoring Sensor (hoop) 1
*Ball Gate Open b
*Ball Gate Closed r
Tickets Low Lo (closed)
“.” (open)
Game Start Button o
Coin Switch C
*Note: both Gate Open and Gate Closed sensors are closed when gate is closed.
N14- BALL GATE MECH TEST
While in the Ball Gate Test mode, pressing the SELECT button turns the motor to the next location.
The current gate position is shown on the displays.
The motor will time out if the sensor is not reading movement.
GATE MOTOR POSITION LEFT DISPLAY
RIGHT DISPLAY
X
(Gate Open
Sensor)
Y
(Gate Closed
Sensor)
Gate is Open OP 0 1
Gate is Closed CL 0 0
Gate is Moving 1 1

14
MAINBOARD PINOUT
SPI Out - Display - (J10) Chase Lights (J11,J12,J13,J14)
Ground Pin 1 & Pin 3 - +12V Pin 1 - Chase Output +12V Pin 2 - SCLK_BUS2 Pin 2 - Chase Output Low Side Driver Pin 4 - SMOSI_BUS2 Pin 3 - +12V High Side Driver Pin 5 & Pin 7 - Ground Pin 4 - Chase Output +3.3V TTL Logic Pin 6 - SCS2_BUS2 Pin 5 - Chase Output +3.3V Pin 8 - SMISO_BUS2 Pin 6 - +12V
R- R+ L+ L-
USB
J19 J24
J9 J5 J21
J14 J13
J11
J12
J10
J6
J25
J8
J22
J18
Flyback Diodes on Q1, Q2
PX37 PB18PB16 PB17
PB7
PX29
PA06
1
8
9
1
6
1
3
4
6
12
3
4
1
1
0
11
2
0
1
5
6
1
0
PA05
PX10
PX11
Bootloader Jumper
PB19PX39PX00PX01PB20PX02PB21PB22PB23PB24
PB25
PB26
Q12 Q10 Q11
Q1Q2Q3Q4
Q5Q6Q7Q8
Q9
Q13Q14

15
MAINBOARD PINOUT GUIDE
SWISH IO for GEN1 REV D, E & E2
Pin Type Purpose Ref Pin # LOWSIDE #1,w diode Mechanical Count #1 Game J22 1 LOWSIDE #2, w diode Mechanical Count #2 Ticket J22 2 LOWSIDE #3 J22 3 LOWSIDE #4 J22 4 LOWSIDE #5 J22 5 LOWSIDE #6 J22 6 LOWSIDE #7 J22 7 Pin Type Purpose Ref Pin # LOWSIDE #8 J22 8 Ground Gate Motor Common/GND J24 1 LOWSIDE #9 J22 9 Ground Sensor, Gate Motor J24 2 +12 Volts Mechanical Count #1 Game +12V J22 10 +12 Volts J24 3 +12 Volts Mechanical Count #2 Ticket +12V J22 11 +12 Volts Sensor, Gate Motor +12V J24 4 +12 Volts J22 12 PB7 Sensor, Gate Motor Input UP J24 5 +12 Volts Strip Light - Top Lights, +12V J22 13 LOWSIDE #12 J24 6 +12 Volts Strip Light - Side Lights, +12V J22 14 PX29 Sensor, Gate Motor Input DOWN J24 7 +12 Volts J22 15 HIGHSIDE #10 Start Push Button Light +12V J24 8 +12 Volts J22 16 HIGHSIDE #11 Gate Motor Driver J24 9
3.3V J24 10
* = Attract Mode Lights TBD
PX37 Ticket Notch #1 J5 1 Ground Ground for Ticket Dispensor J5 2 PB18 Ticket Motor #1 J5 3
HIGHSIDE #13 J25 1 +12 Volts Power for Ticket Dispensor J5 4 HIGHSIDE #14 J25 2 PX10 Service Button #1 J25 3 PB16 Low Ticket Switch J9 1 PX11 Service Button #2 J25 4 Ground Ground for Low Ticket Switch J9 2
Ground J25 5 PB17 Jersey Coin Lockout (Not Used?) J9 3
Ground Ground for Service Buttons J25 6 +12 Volts J9 4 +12 Volts Coin Door Power J6 1 PA06 DBA Input J8 1
PA05 Coin Input J6 2 +12 Volts DBA +12V J8 2
Ground Coin Ground J6 3 Ground DBA Gnd J8 3
Ground J8 4 = LED Constant Current Drive = 12 Volts = Ground
BayTek Swish NEWGEN1 Hardware Pinout
=Low Side Driver =High Side Driver = TTL Input/Output
H:\Service Manuals & Documents\DROPBOX\SWISH\2011-03-19rev io_newgen_swish.xls
Page 1 of 1 Printed: 3/8/2012 9:33 AM

16
MAINBOARD PINOUT GUIDE
SWISH IO for GEN1 REV D, E & E2
Driver 1 J12 1
PB19 Hoop Sensor J21 1 Driver 2 J12 2 PX39 J21 2 +12 Volts J12 3 PX00 J21 3 Driver 3 J12 4 PX01 J21 4 Driver 4 J12 5 PB20 J21 5 +12 Volts J12 6 PX02 J21 6 PB21 J21 7 Driver 5 J11 1 PB22 J21 8 Driver 6 J11 2 PB23 J21 9 +12 Volts J11 3 PB24 J21 10 Driver 7 J11 4 Ground Start Push Button Light J21 11 Driver 8 J11 5 Ground Hoop Sensor Ground J21 12 +12 Volts J11 6 Ground J21 13 Ground J21 14 Driver 9 J13 1 +12 Volts J21 15 Driver 10 J13 2 +12 Volts Hoop Sensor +12V J21 16 +12 Volts J13 3 +12 Volts J21 17 Driver 11 J13 4 +12 Volts J21 18 Driver 12 J13 5 PB25 J21 19 +12 Volts J13 6 PB26 Start Push Button Inpu
t
J21 20
Driver 13 J14 1 Driver 14 J14 2 +12 Volts J14 3 Driver 15 J14 4 Driver 16 J14 5 +12 Volts J14 6
H:\Service Manuals & Documents\DROPBOX\SWISH\2011-03-19rev io_newgen_swish.xls
Page 1 of 1 Printed: 3/6/2012 3:04 PM

17
MAIN BOARD PINOUT
A5NEWGEN1
J18
AACE2508
12 Volt DC
Power In Cable
AACE2502 Buttons
and Counters
J22
J25
AACE2502
Buttons and Counters
J8
AACE2510
Bill Acceptor
J21
AACE2002 Lights and Player Start Buttons
J24
AACE2512 Motor and Motor Sensor
J5
J9
AACE2501 Ticket
Dispenser/Low ticket Cable
J6 AACE2503 Coin Door
+12 V Signal Com
J19
AACE2507 Cable to Speakers
J16 AACE2506
Display Cable

18
WIRING DIAGRAMS
MENU BUTTONS, COUNTERS, START SWITCH, LED’S BALL
SENSOR, GATE MOTOR & SENSOR
2
AACE2511
Menu
Select
Button
Menu
Button
Ticket and Game
Counters
AACO1000
Ticket
Counter
Game
Counter
AACE2502
AASE0020
Hoop Sensor
AACE2500
Game Start
Pushbutton
and Light
AACE2514
+
-
+
-
LED Cabinet Lighting
A5PB8000
AACE2512
AAMO1001
Ball Gate Motor
AACB2501
Ball Gate Sensor
To J25 on
Main Board
To J22 on
Main Board
To J21 on
Main Board
To J24 on
Main Board

19
WIRING DIAGRAMS
COIN DOOR, DBA, TICKET DISPENSER, DISPLAY
3
+12 V
Signal
Com
To Ticket Dispense (A5TD1)
Notch Signal
Com Ground
Enable Signal
12 Volt Power
Low Ticket Switch
Wired Normally Open
AASW200
1/4” Spacer (A5SENY020)
To J5 on
Main Board
To J9 on
Main Board
AACE2501
Coin Switches
(AASW9903)
Wired Normal
Open
ToJ6
(COIN)on
Main Board
AACE2503
Coin Door Harness
AACBL4A-DOOR
IN
Time Display
AABD4208
IN
Score Display
AABD4208
AACE2505
AACE2506
AACE2506
To J8
on Main
Board
AACE2510
Bill Acceptor
Cable

20
WIRING DIAGRAMS
POWER IN & SPEAKER
4
Power In Cord
From Wall
A5CORD5
Outlet Strip
AACE2504
Line Filter
A5FI9010
To J18
“POWER IN”
Connector on
Main Board
Speaker
A5SP1050
To J19
on Main
Board
AACE2507
To Speaker
Power Supply
Power Cable
AACE2509
Power Supply 12
Volt Cable
AACE2508
Power Supply
A5PS1001
Green LED power
indicator and voltage
adjustment pot