Bay Tek Games Jewel Mine User manual

1

2
FACTORY CONTACT INFORMATION
BAY TEK GAMES INC.
Pulaski Industrial Park
1077 East. Glenbrook Drive
Pulaski, WI 54162 USA
PARTS
P: 920.822.3951 X 1101
F: 920.822.1496
E: [e-mail]
MON - FRI
8 AM - 5 PM C.S.T.
SERVICE
P: 920.822.3951 X 1102
F: 920.822.1496
E: [e-mail]
SALES
P: 920.822.3951
F: 920.822.8936
E: [e-mail]
JOIN OUR SERVICE FIRST NETWORK!
This free service is intended to keep you up to date on the latest game
information, early notication of parts specials, pertinent technical bulle-
tins, updates on retro t parts, software upgrades, and much more.
Log on to: www.baytekgames.com/parts
then click on the Parts N’ Service tab, or scan the QR code below with
your Smartphone to jump straight to this game’s parts page!
Scan here!
All games are proudly manufactured at our factory in Pulaski, Wisconsin, USA

3
TABLE OF CONTENTS
FACTORY CONTACT INFORMATION ..............................2
WELCOME TO: Jewel Mine ......................................4
HOW TO PLAY ................................................5
SPECIFICATIONS..............................................6
SAFETY PRECAUTIONS ........................................6
SET UP GUIDE.............................................7-12
MAIN MENU FUNCTIONS ......................................13
CLEAR CREDITS/TICKETS ................................14
VOLUME AND ATTRACT SETTINGS.........................14
GAME SETTINGS........................................15
PAYOUT SETTINGS ......................................16
TICKET PATTERNS ...................................17-19
STATISTICS ............................................20
HOW TO: REMOVE HANDLE....................................20
HOW TO: TIGHTEN ARM BRACKET ..............................21
HOW TO: OPEN WHEEL WINDOW...............................21
HOW TO: ADJUST BRAKE...................................22-23
HOW TO: CALIBRATE ENCODER SENSOR.....................24-25
HOW TO: ACCESS LIGHT BULBS IN WHEELS .....................25
HOW TO: REMOVE WHEELASSEMBLY........................26-30
MAIN BOARD PIN OUT ........................................31
MAIN BOARD PIN OUT GUIDE ..................................32
CIRCUIT BOARD WIRING ......................................33
WIRING DIAGRAMS........................................34-38
CARD SWIP SYSTEM INSTRUCTIONS ...........................39
HOW TO: UPDATE SOFTWARE .................................39
POWER SUPPLY DIAGNOSTICS ................................40
TROUBLESHOOTING GUIDE ................................41-47
PARTS LIST .................................................48
PARTS PICTURES .........................................49-51
DECAL DIAGRAM.............................................52
MAINTENANCE LOG ..........................................53
TECHNICAL SUPPORT ........................................54
WARRANTY .................................................55

4
WELCOME TO: Jewel Mine
Congratulations on your Jewel Mine purchase!
Strike it rich with the new and innovative wheel family game, Jewel Mine! Pull up and
push down on the handle to spin the wheel, sending your mining cart down the track
and into the mining cave! Use just enough force to stop the spinning wheel on the
highest amount of sparkling gems to win the most tickets!
Please take a moment to read through this manual and be sure to contact our factory if
you have any questions, or would like some more information.
Thank you for your purchase! Your business is important to us and we hope you enjoy
this game as much as we do!
Your Friends at Bay Tek Games
GAME INSPECTION
Inspect the game for any damaged, loose, or missing parts.
If damage is found, please contact your freight carrier rst.
Then, contact Bay Tek Games’ Service Department at 920.822.3951
or e-mail them at [email protected] for further assistance.

5
HOW TO PLAY
Lift handle up.
Pull the handle down, using just the right
amount of force to win big!
Win the ticket value displayed on the
space that stops under the arrow!

6
GAME SPECIFICATIONS
SAFETY PRECAUTIONS
WEIGHT
NET WEIGHT 580 LBS.
SHIP WEIGHT 630 LBS.
DIMENSIONS
WIDTH 34”
DEPTH 69.75”
HEIGHT 79.25”
(100” with marquee)
OPERATING TEMPERATURE
FAHRENHEIT 80-100
CELSIUS 26.7-37.8
POWER REQUIREMENTS
INPUT VOLTAGE
RANGE 100 to 120 VAC /220 to 240 VAC
INPUT FREQUENCY
RANGE 50 HZ / 60 HZ
MAX OPERATING
CURRENT
1.4 AMPS @ 115 VAC
.8 AMPS @ 230 VAC
DANGER
DO NOT perform repairs or maintenance on this game with the power ON.
Unplug the unit from the wall outlet or shut off the power strip located inside the cabinet.
!!
NOTICE
Modications to the mechanical, electrical and structural components of this game
may void its compliance certications.
!!
WARNING
Use of ammable subtances can cause sever burns or serious injury.
Always use NON-FLAMMABLE solvents for cleaning. DO NOT use gasoline kerosene or thinners.
!!
CAUTION
Lifting heavy objects can cause back, neck or other injuries. Be sure adequate lifting and moving
devices are available when unloading, unpacking and moving this game.
!!
ATTENTION
Be sure the electrical power matches the game requirements. See the serial number located on the
back of the game cabinet. Always plug into a grounded circuit. If the supply cord is damaged, it must
be replaced by an approved cord or assembly provided by the manufacturer.
A shielded power cable must be used for the game to retain EU/EMC compliance.
!!
IN CASE OF EMERGENCY
UNPLUG THE POWER CORD.
The power cord must be accessible at all times in case of an emergency.
!!
This appliance is suitable for INDOOR, DRY locations only.

7
SET UP GUIDE
Using a snips, cut off the zip tie from the
cables (9622-1, 9622-2 and the red
ethernet cable) bundled on the top left of
the game.
From the front of the cabinet, remove the
second bolt on each side rail.
LEFT SIDE
RIGHT SIDE

8
SET UP GUIDE CONT.
With help from someone else - from the
front of the cabinet, loosen the rst bolt on
each side rail.
One person can use a drill with a phillips
bit on one side, and the other person can
use a phillips head screw driver on the
other side.
This will prevent the rod/bolts from
spinning once one bolt is loosened.
Loosen both bolts approx 1/4”.
Each person will need one of the two bolts
that were removed from the side rails
earlier.
Carefully lift the marquee up to the top of
the game and set onto the bolts on each
side that were backed out 1/4”.

9
SET UP GUIDE CONT.
When the marquee is up and in position,
start to rethread in the bolts into the open
holes. You will still want to hold the
marquee as it is not secured yet.
Tighten both back bolts - leaving the front
ones loose yet.
Lift or push up on the front of the marquee.
Make sure the marquee is level across the
top of the game. When in a level position,
use a drill to tighten the front bolts in place.

10
SET UP GUIDE CONT.
From the cashbox, remove the piece of
black wire loom.
Place a #2 square bit on the drill. Carry the
drill and the wire loom up a step ladder to
the back of the game.
Using the drill, remove the four screws
from the cover on the back of the
marquee.

11
SET UP GUIDE CONT.
Route the three cables (9608-1, 9608-2
and the red ethernet cable) through the cut
out on the right side of the marquee box.
Pull all excess slack through the cut out.
Place the wire loom over the cables still
outside of the marquee box.
Plug cable 9608-1 to the marquee cable:
9612 (circled in yellow).
Plug cable 9608-2 to the raspberry pi board
(circled in blue).
Plug in the red ethernet cable to the phone
port on the main board (circled in orange).

12
SET UP GUIDE CONT.
Replace and secure the cover to the
marquee box, using the four screws you
removed earlier.
**Be cautious not to pinch any cables!
Get power cable from the cashbox and
plug into the line lter at the bottom rear of
the game.
Plug the remaining end of the power cable
into a standard power outlet.
YOU ARE READY TO PLAY!

13
MAIN MENU FUNCTIONS
Press and hold the MENU button
located inside the front door to access
the main menu.
Scroll through the options with the
MENU button.
Make your selections with the
MENU SELECT button.
Mute Option DISABLED ENABLED

14
CLEAR CREDITS/TICKETS
VOLUME & ATTRACT SETTINGS
Press the MENU SELECT button 3 times
to clear any owed tickets or credits stored
on the game.
Attract Volume 0 1 2 3 4 5 6 7 8 9 10
Game Volume 0 1 2 3 4 5 6 7 8 9 10
Jackpot Volume 0 1 2 3 4 5 6 7 8 9 10
Factory defaults are highlighted below.

15
GAME SETTINGS
Factory defaults are highlighted below.
Game Mode/
Payment NORMAL/ TICKETS NORMAL/ POINTS SHOW MODE
Attract Time
(in minutes)
0
(disabled) TO 30 DEFAULT:
5
ADJUSTABLE IN INCREMENTS OF 5
Show JP on
Screen OFF ON (NO MARQUEE OPTION)
Link Option* DISABLED ENABLED
* this gives the marquee notication that it should be looking for the jackpot value from an external
device. The link option also allows the marquee to display error messages for bad communication
issues or no communication at all.

16
PAYOUT SETTINGS
Factory defaults are highlighted below.
Credits Per Play 0TO 20 4
ADJUSTABLE IN INCREMENTS OF 1
Swipe Prompt ENABLED DISABLED
Paper Ticket Value 1 2
Ticket Pattern See pages 17-19 for ticket patterns.
Progressive
Minimum Value 25 50 100 250 500 750 1000 1250 1500 1800 2000
Progressive
Maximum Value 50 100 250 500 750 1000 1500 2000 4000 5000 9999
Progressive
Increment Value 0
(dis-
abled) 12345678910
Progressive Reset Press the MENU SELECT button 3 times to reset
progressive jackpot

17
TICKET PATTERNS
2
2
3
3
5
5
Jackpot
25
4 4
4 4
25
4 4
4 4
2
5
3
3
5
5
25
4 4
4 4
4 4
4 4
P1
A5DE9627-1
6-8 TICKETS
PER GAME
14-17 TICKETS
PER GAME
19-22 TICKETS
PER GAME
23-26 TICKETS
PER GAME
27-30 TICKETS
PER GAME
A5DE9627-2 A5DE9627-3 A5DE9627-4 A5DE9627-5
10
10
25
25
10
10
Jackpot
50
4 4
4 4
50
4 4
4 4
10
10
25
10
10
10
50
4 4
4 4
4 4
4 4
P2
15
15
25
40
10
15
Jackpot
50
4 4
4 4
50
4 4
4 4
15
15
25
40
10
10
50
4 4
4 4
4 4
4 4
P3
15
15
40
25
10
10
Jackpot
50
4 4
4 4
50
4 4
4 4
15
15
40
25
10
10
50
4 4
4 4
4 4
4 4
P4
15
15
25
75
10
15
Jackpot
100
4 4
4 4
100
4 4
4 4
10
15
25
75
10
10
100
4 4
4 4
4 4
4 4
P5

18
TICKET PATTERNS
15
10
25
40
50
50
Jackpot
100
44
44
100
44
44
15
10
25
40
50
50
100
44
44
44
44
P6
50
50
40
40
10
50
Jackpot
100
44
44
100
44
44
10
50
40
40
10
10
100
44
44
44
44
P7
15
15
25
75
50
50
Jackpot
100
44
44
100
44
44
15
15
25
75
50
50
100
44
44
44
44
P8
15
15
75
75
50
15
Jackpot
100
44
44
100
44
44
50
15
75
75
50
50
100
44
44
44
44
P9
50
10
75
75
50
50
Jackpot
250
44
44
250
44
44
50
10
75
75
50
50
250
44
44
44
44
P10
32-35 TICKETS
PER GAME
38-41 TICKETS
PER GAME
42-45 TICKETS
PER GAME
50-53 TICKETS
PER GAME
32-35 TICKETS
PER GAME
(2 Point Ticket)
A5DE9627-6 A5DE9627-7 A5DE9627-8 A5DE9627-9 A5DE9627-10
DEFAULT

19
TICKET PATTERNS
15
10
10
40
75
150
Jackpot
250
44
44
250
44
44
15
10
75
40
150
150
250
44
44
44
44
P11
10
150
40
40
50
150
Jackpot
500
44
44
500
44
44
10
150
40
40
50
150
500
44
44
44
44
P12
5
5
25
25
5
5
Jackpot
50
44
44
50
44
44
5
5
25
10
5
5
50
44
44
44
44
P13
2
2
3
3
2
5
Jackpot
10
44
44
10
44
44
2
2
3
3
2
5
10
44
44
44
44
P15
10
10
10
10
10
10
Jackpot
10
10
10
10
10
10
10
10
10
P14
60-63 TICKETS
PER GAME
74-77 TICKETS
PER GAME
10-13 TICKETS
PER GAME
10 TICKETS
PER GAME
4-6 TICKETS
PER GAME
A5DE9627-11 A5DE9627-12 A5DE9627-13 A5DE9627-14 A5DE9627-15

20
STATISTICS
Total Games Played Number of games played since last statistics reset
Total Tickets Won Number of tickets dispensed since last statistics reset
Total Jackpot Winners Number of jackpots won since last statistics reset
Average Tickets Average amount of tickets dispensed per game played
Clear Statistics Press the MENU SELECT button 3 times to clear all
statistics. [DONE] will display when successful.
HOW TO: REMOVE HANDLE
Tools Needed:
1/2” Socket & rachet
1/2” Wrench
Located on the underside of the metal front panel,
there is a bolt, split washer, and locknut holding the
handle into the square pipe attached to the linkage.
Remove the bolt by turning the rachet on the locknut
and holding the bolt still with the wrench.
Pull the handle out from the front of the game.