Beckhoff Cp29-2-0000 series User manual

Manual | EN

CP29xx-2xxx-0000

Control Panel

12/6/2021 | Version: 1.3

Table of contents

CP29xx-2xxx-0000 3Version: 1.3

Table of contents

1 Notes on the documentation ....................................................................................................................5

2 For your safety...........................................................................................................................................6

2.1 Description of safety symbols............................................................................................................6

2.2 Intended use......................................................................................................................................6

2.3 Fundamental safety instructions........................................................................................................7

2.4 Operator's obligation to exercise diligence ........................................................................................7

2.5 Notes on information security ............................................................................................................8

3 Product overview.......................................................................................................................................9

3.1 Structure ..........................................................................................................................................10

3.2 Interface description ........................................................................................................................11

3.2.1 Power supply ................................................................................................................... 11

3.2.2 USB ................................................................................................................................. 12

3.2.3 DVI................................................................................................................................... 12

3.3 Name plate ......................................................................................................................................13

3.4 Connection cables/connection kits ..................................................................................................14

4 Commissioning........................................................................................................................................15

4.1 Transport and unpacking.................................................................................................................17

4.2 Installation in the control cabinet .....................................................................................................18

4.2.1 Dimensions ...................................................................................................................... 18

4.2.2 C6030 installation ............................................................................................................ 20

4.2.3 Installation in the control cabinet ..................................................................................... 22

4.3 Connecting the Control Panel..........................................................................................................22

4.3.1 Installing the supply cable................................................................................................ 23

4.3.2 Grounding the Control Panel ........................................................................................... 25

4.3.3 Connecting cables and power supply .............................................................................. 26

5 Shutting down..........................................................................................................................................27

5.1 Disconnecting the power supply and cables ...................................................................................27

5.2 Disassembly and disposal ...............................................................................................................28

6 Servicing and maintenance ....................................................................................................................29

7 Troubleshooting ......................................................................................................................................30

8 Technical Data .........................................................................................................................................31

9 Appendix ..................................................................................................................................................32

9.1 Service and support.........................................................................................................................32

9.2 Approvals.........................................................................................................................................33

Table of contents

CP29xx-2xxx-00004 Version: 1.3

Notes on the documentation

CP29xx-2xxx-0000 5Version: 1.3

1 Notes on the documentation

This description is only intended for the use of trained specialists in control and automation engineering who

are familiar with the applicable national standards.

The following instructions and explanations must be followed during installation and commissioning of the

components. The responsible staff must ensure that the application or use of the products described satisfy

all the requirements for safety, including all the relevant laws, regulations, guidelines and standards.

Disclaimer

The documentation has been prepared with care. The products described are, however, constantly under

development. For that reason the documentation is not in every case checked for consistency with

performance data, standards or other characteristics. In the event that it contains technical or editorial errors,

we retain the right to make alterations at any time and without warning. No claims for the modification of

products that have already been supplied may be made on the basis of the data, diagrams, and descriptions

in this documentation. All illustrations shown are only examples. The configurations depicted may deviate

from the standard.

Trademarks

Beckhoff®, TwinCAT®, TwinCAT/BSD®, TC/BSD ®, EtherCAT®, EtherCAT G®, EtherCAT G10®, EtherCAT P®,

Safety over EtherCAT®, TwinSAFE®, XFC®, XTS® and XPlanar® are registered and licensed trademarks of

Beckhoff Automation GmbH.

Other designations used in this publication may be trademarks whose use by third parties for their own

purposes could violate the rights of the owners.

Patents

The EtherCAT Technology is covered, including but not limited to the following patent applications and

patents: EP1590927, EP1789857, EP1456722, EP2137893, DE102015105702 and similar applications and

registrations in several other countries.

grant of a patent, utility model or design.

Delivery state

All the components are supplied in particular hardware and software configurations appropriate for the

application. Changes to the hardware or software configuration are permitted, provided they are within the

specified limits for power consumption and power loss (please refer to the respective data sheet).

Delivery conditions

In addition, the general delivery conditions of the company Beckhoff Automation GmbH & Co. KG apply.

For your safety

CP29xx-2xxx-00006 Version: 1.3

2 For your safety

The safety chapter explains the safety symbols used and their meanings. They contain fundamental safety

instructions that are essential for the avoidance of personal injuries and damage to property.

Exclusion of liability

Beckhoff shall not be liable in the event of non-compliance with this documentation and thus the use of the

devices outside the documented operating conditions.

2.1 Description of safety symbols

The following safety symbols are used in these operating instructions. In order to avoid personal injuries and

damage to property, read and follow the safety and warning notices.

Warning of personal injuries:

DANGER

Disregarding the safety notice will lead to death or serious injuries.

WARNING

Disregarding the safety notice may lead to death or serious injuries.

CAUTION

Disregarding the safety notice may lead to minor injuries.

Warning of damage to property:

NOTE

Disregarding the notice may lead to damage to property.

2.2 Intended use

The CP29xx multi-touch built-in Control Panel is designed for industrial applications in machine and plant

engineering. A display with multi-finger touch screen is installed in an aluminum housing. The Control Panel

is installed in the front of control cabinets. The Control Panel can be placed up to 5 m away from the PC.

The front of the Control Panel is designed for an IP65 working environment. It offers full protection against

contact and against water jets (nozzle) from any angle and against dust. The rear of the Control Panel is

designed for an IP20 working environment. It is protected against the penetration of fingers and solid foreign

bodies of 12.5 mm or larger in size. It is not protected against water. The specified limits for technical data

must be adhered to.

The Control Panel can be used within the documented operating conditions.

Improper use

Do not use the device outside the documented operating conditions.

For your safety

CP29xx-2xxx-0000 7Version: 1.3

2.3 Fundamental safety instructions

The following safety instructions must be observed when handling the device.

Application conditions

• Do not use the device under extreme environmental conditions. Protect the back of the device from

dust, moisture and heat and keep the ventilation slots clear.

• Never use the device in potentially explosive atmospheres.

• Do not carry out any work on the device while it is live. Always switch off the supply voltage for the

device before mounting it, replacing device components or rectifying malfunctions.

• Never connect the device during a thunderstorm. There is a risk of electric shock.

• Ensure that the device has a protective and functional earth connection.

Damage to property, loss of data and impairment of functions

• Ensure that only trained specialists with a control and automation technology background, operate the

device. Use by unauthorized persons can lead to damage to property and loss of data.

• Protect the power supply cable with a fuse with a max. rating of 16A. The fuse serves to protect the

supply line in the event of a short circuit.

• In case of fire, extinguish the device with powder or nitrogen.

2.4 Operator's obligation to exercise diligence

The operator must ensure that

• the products are used only for their intended purpose (see chapter 2.2 Intended use [}6]).

• the products are only operated in sound condition and in working order.

• the products are operated only by suitably qualified and authorized personnel.

• the personnel is instructed regularly about relevant occupational safety and environmental protection

aspects, and is familiar with the operating instructions and in particular the safety instructions contained

herein.

• the operating instructions are in good condition and complete, and always available for reference at the

location where the products are used.

For your safety

CP29xx-2xxx-00008 Version: 1.3

2.5 Notes on information security

The products of Beckhoff Automation GmbH & Co. KG (Beckhoff), insofar as they can be accessed online,

are equipped with security functions that support the secure operation of plants, systems, machines and

networks. Despite the security functions, the creation, implementation and constant updating of a holistic

security concept for the operation are necessary to protect the respective plant, system, machine and

networks against cyber threats. The products sold by Beckhoff are only part of the overall security concept.

The customer is responsible for preventing unauthorized access by third parties to its equipment, systems,

machines and networks. The latter should be connected to the corporate network or the Internet only if

appropriate protective measures have been set up.

In addition, the recommendations from Beckhoff regarding appropriate protective measures should be

observed. Further information regarding information security and industrial security can be found in our

https://www.beckhoff.com/secguide.

Beckhoff products and solutions undergo continuous further development. This also applies to security

functions. In light of this continuous further development, Beckhoff expressly recommends that the products

are kept up to date at all times and that updates are installed for the products once they have been made

available. Using outdated or unsupported product versions can increase the risk of cyber threats.

To stay informed about information security for Beckhoff products, subscribe to the RSS feed at https://

www.beckhoff.com/secinfo.

Product overview

CP29xx-2xxx-0000 9Version: 1.3

3 Product overview

The Beckhoff Panel generation with industrially-compatible multi-touch display is designed for control cabinet

installation. The devices offer suitable solutions for a variety of applications. The model variety ranges from

different display sizes and formats to custom models. This Panel generation is also suited for single-touch

applications.

The Control Panel has the following features:

• Different display sizes, landscape and portrait mode:

◦ 15.6 inch (16:9)

◦ 18.5 inch (16:9)

◦ 19 inch (5:4)

◦ 21.5 inch (16:9)

• Multi-finger touch screen (PCT): e.g. for 10-finger touch

• Aluminum housing with glass front, IP65 at the front, IP20 at the rear; the housing surface is electrically

insulating

• 1x DVI

• 1x USB 3.0

• Control cabinet installation via pull-out clamping levers for fast installation without loose parts

Product overview

CP29xx-2xxx-000010 Version: 1.3

3.1 Structure

Figure 2 shows an example of the device configuration for all CP29xx-2xxx variants.

Fig.1: CP29xx-2xxx_configuration

Table1: Legend for CP29xx-2xxx configuration

No. Component Description

1 Display and touch screen glass Operating the Control Panel

2 Clamping lever Mounting the Control Panel in the

control cabinet

3 Industrial PC C6030, optional Control system in machine

construction and plant engineering

4 Mounting plate for C6030 Part of the C6030: Plate for

mounting the Industrial PC at the

back of the Control Panel

5 Fastening points for C9900-K790 Attaching the power supply cable

adapter for shared use of CP29xx

and C6030

6 Connection block Access to the interfaces

7 Name plate Information on the Control Panel

equipment

8 Power supply (X101) Connection of the power supply

and external wiring of the Control

Panel

9 Grounding bolt Functional earth of the Control

Panel

10 USB 3.0 interface (X104) Connection of peripheral devices

11 DVI interface (X106) Transmission of digital signals,

connection to digital displays

Product overview

CP29xx-2xxx-0000 11Version: 1.3

3.2 Interface description

The Control Panel features the following interfaces, which are located at the back of the housing:

• Power supply

• USB 3.0

• DVI

3.2.1 Power supply

The Control Panel is supplied with a nominal input voltage of 24 V. The five-pin power socket (X101) is used

for connection to the power supply and the external wiring of the Control Panel.

X101

1 2 345

Fig.2: CP29xx-2xxx_Voltage connector pin numbering

Table2: Voltage connector pin assignment

Pin Signal Description

1 NC not used

2 NC not used

3 Protective earth

4 - 24 V power supply, negative pole

5 + 24V 24 V power supply, positive pole

The plug for the power supply is specified for 16A and can accommodate wire cross-sections of up to

1.5mm2. For long supply lines, use 1.5 mm2 cables to achieve a low voltage drop on the supply line. There

should be at least 22 V at the power supply plug of the Control Panel, so that the Control Panel remains

switched on during voltage fluctuations. The plug is included in the delivery. For information regarding

replacement plugs and strain relief housing, refer to chapter 4.2.1 Installing the supply cable [}23].

Product overview

CP29xx-2xxx-000012 Version: 1.3

3.2.2 USB

The Control Panel has a USB 3.0 interface (X104) that supports the USB 3.0 specification. The Control

Panel is connected to the Industrial PC via the USB input.

X104

Fig.3: CP29xx-2xxx_USB interface pin numbering

Table3: USB interface pin assignment

Pin Assignment

Shield GND

1 Vbus

2 D -

3 D +

4 GND

5 StdA_SSRX -

6 StdA_SSRX +

7 GND_DRAIN

8 StdA_SSTX -

9 StdA_SSTX +

3.2.3 DVI

The Control Panel has a DVI interface (X106). It is used to transmit the video signal from the Industrial PC to

the Control Panel.

The graphics signal is transmitted directly over a maximum distance of 5m. The Industrial PC requires a

conventional DVI output. The resolution at the Control Panel depends on the distance from the display

device.

X106

Fig.4: CP29xx_DVI interface pin numbering

Table4: DVI interface pin numbering

Pin Signal Pin Signal Pin Signal

1 Rx2- 9 Rx1- 17 Rx0-

2 Rx2+ 10 Rx1+ 18 Rx0+

3 GND 11 GND 19 GND

4 Rx4- 12 Rx3- 20 Rx5-

5 Rx4+ 13 Rx3+ 21 Rx5+

6 DDC CLK 14 + 5V DVI 22 GND

7 DDC DAT 15 GND 23 RxC+

8 AV SYNC 16 HPD 24 RxC-

Product overview

CP29xx-2xxx-0000 13Version: 1.3

3.3 Name plate

The name plate is shown as an example of all versions of the Control Panel.

8910 11

Fig.5: CP29xx-2xxx_Name plate example

Table5: Legend for CP29xx-2xxx name plate

No. Description

1 Model: The last four digits indicate the device

generation.

2 FCC approval

3 Serial number (BTN)

4 Date of manufacture

5 Display

6 Touch screen

7 Power supply: 24 VDC, NEC class 2

8 DVI interface (X106)

9 USB interface (X104)

10 Grounding bolt

11 Connection of the power supply and external wiring

of the Control Panel (X101)

12 Conformity symbols

13 Address of the vendor

Product overview

CP29xx-2xxx-000014 Version: 1.3

3.4 Connection cables/connection kits

The following connection cables and ready-made connection kits are available for the CP29xx-2xxx:

Table6: Connection cables/kits CP29xx

Connection cables/connection kits Description

C9900-K774 Connection kit 1 m, includes: 1 m display port to DVI

cable, 1 m USB cable

C9900-K775 Connection kit 3 m, includes: 3 m display port to DVI

cable, 3 m USB cable

C9900-K776 Connection kit 5 m, includes: 5 m display port to DVI

cable, 5 m USB cable

C9900-K780 Display port connection cable for DVI-D display cable

1 m

C9900-K781 Display port connection cable for DVI-D display cable

3 m

C9900-K782 Display port connection cable for DVI-D display cable

5 m

C9900-K554 Connection cable USB-2.0 A-B, 1 m

C9900-K552 Connection cable USB-2.0 A-B, 3 m

C9900-K553 Connection cable USB-2.0 A-B, 5 m

Ready-made connection kits for DVI/USB connection are available as an option. They are included as

standard when you order the C6030 as an option for mounting at the back of the Control Panel. They can

also be ordered separately from Beckhoff sales, quoting the following article descriptions:

Table7: Connection kits CP29xx with C6030

Connection kit DVI/USB connection

C9900-K783 Display port connection cable for DVI-D display cable

0.33 m

C9900-K784 Connection cable USB-2.0 A-B, 0.37 m

C9900-K790 Power supply cable adapter for shared use of

C6030-2xxx-00x0 and CP29xx-2xxx-000

Commissioning

CP29xx-2xxx-0000 15Version: 1.3

4 Commissioning

Operating the Control Panel

The Control Panel is operated via the touch screen.

NOTE

Damage to the touch screen

Operating the touch screen with unsuitable objects may damage the touch screen.

• Operate the touch screen only with bare fingers or wearing suitable gloves.

• If you use gloves, make sure that no hard particles such as metal shavings, glass splinters or similar ad-

here to the glove.

If you, as the user, require additional protection for the touch screen against dirt or scratching, for example

due to dirty hands, this can be achieved with a Beckhoff protective film. The film provides short-term

protection for a few days.

You can either order a Beckhoff protective film individually and fit it yourself retrospectively, or you can order

the film for fitting directly ex works.

The following ordering options are available:

Table8: Ordering options: Film, individual

Ordering option Description

C9900-T225 Adhesive protective film for Panel PCs and Control Panels with 7-inch display, for

fitting onto the glass pane, 1 item

C9900-T226 Adhesive protective film for Panel PCs and Control Panels with 12-inch display, for

fitting onto the glass pane, 1 item

C9900-T238 Adhesive protective film for Panel PCs and Control Panels with 12.1-inch display, for

fitting onto the glass pane, 1 item

C9900-T227 Adhesive protective film for Panel PCs and Control Panels with 15-inch display, for

fitting onto the glass pane, 1 item

C9900-T228 Adhesive protective film for Panel PCs and Control Panels with 15.6-inch display, for

fitting onto the glass pane, 1 item

C9900-T229 Adhesive protective film for Panel PCs and Control Panels with 18.5-inch display, for

fitting onto the glass pane, 1 item

C9900-T230 Adhesive protective film for Panel PCs and Control Panels with 19-inch display, for

fitting onto the glass pane, 1 item

C9900-T231 Adhesive protective film for Panel PCs and Control Panels with 21.5-inch display, for

fitting onto the glass pane, 1 item

C9900-T232 Adhesive protective film for Panel PCs and Control Panels with 24-inch display, for

fitting onto the glass pane, 1 item

Commissioning

CP29xx-2xxx-000016 Version: 1.3

Table9: Ordering options: Film fitted ex works

Ordering option Description

C9900-T217 Adhesive protective film for Panel PCs and Control Panels with 7-inch display, for