Beckhoff Cp29xx-0000 series User manual

Installation and Operating instructions for

CP29xx-0000

Multi-touch Control Panel with DVI/ USB Extended interface

CP29xx-0010

Multi-touch Control Panel with CP-Link 4 interface

Version: 1.9

Date: 2018-11-13

Table of contents

1Foreword 3

1.1 Notes on the Documentation 3

1.1.1 Liability Conditions 3

1.1.2 Trademarks 3

1.1.3 Patent Pending 3

1.1.4 Copyright 3

1.1.5 State at Delivery 3

1.1.6 Delivery conditions 3

1.2 Description of safety symbols 4

1.3 Basic safety measures 5

1.4 Operator’s obligation to exercise diligence 6

1.4.1 National regulations 6

1.4.2 Procedure in the event of a fault 6

1.4.3 Operator requirements 6

2Product Description 7

2.1 Product overview 7

2.2 Appropriate Use 8

2.3 Access to the connectors 8

2.4 Interfaces CP29xx-0000 10

2.4.1 DVI-E Input (Digital Visual Interface-Extended) (X106) 10

2.4.2 USB-Extended Input (X 105) 10

2.4.3 USB in (X 104) 11

2.4.4 USB out (X 102, X 103) 11

2.4.5 Ground connection 11

2.4.6 Power Supply (X101) 11

2.5 Interfaces CP29xx-0010 12

2.5.1 CP-Link 4 Architecture Description 12

2.5.2 Interfaces 14

2.5.3 USB out (X 102, X 103) 14

2.5.4 CP-Link 4 Input (X104) 14

2.5.5 Power Supply (X101) 15

2.5.6 Ground connection 15

2.6 Connection Kits/ Connection Cables/Accessories 16

2.6.1 Connection Kits DVI-E/ USB-E connection for CP29xx-0000, optional 16

2.6.2 Accessories for CP29xx-0010, optional 16

2.6.3 Connecting cables for CP29xx-0010, optional 17

3Installation 18

CP29xx 1

Table of contents

3.1 Transport and Unpacking 18

3.1.1 Transport 18

3.1.2 Unpacking 18

4Mounting 19

4.1 Installation in the control cabinet 19

4.1.1 Preparation of the control cabinet 19

4.1.2 Installation in a control cabinet wall 19

4.1.3 Earthing measures 19

4.1.4 Mounting of the Control Panel 20

4.1.5 Fitting the power supply cable 21

4.2 Connecting the Control Panel 22

4.2.1 Connecting cables 22

4.2.2 Protective Earthing 22

5Operating Instructions 23

5.1 Switching the Control Panel on and off 23

5.1.1 Switching on 23

5.1.2 Shutting down and switching off 23

5.2 Operation 23

5.3 Servicing and maintenance 24

5.3.1 Cleaning 24

5.3.2 Maintenance 24

5.4 Emergency procedures 24

5.5 Shutting down 24

5.5.1 Disposal 24

6Troubleshooting 25

7Assembly dimensions 26

8Technical Data 27

9Appendix 28

9.1 Beckhoff Support and Service 28

9.1.1 Beckhoff branches and partner companies 28

9.1.2 Beckhoff company headquarters 28

9.2 Approvals for USA and Canada 29

9.3 FCC Approvals for the United States of America 29

9.4 FCC Approval for Canada 29

2CP29xx

Foreword

1 Foreword

1.1 Notes on the Documentation

This description is only intended for the use of trained specialists in control and automation engineering

who are familiar with the applicable national standards. It is essential that the following notes and

explanations are followed when installing and commissioning these components.

The responsible staff must ensure that the application or use of the products described satisfy all the

requirements for safety, including all the relevant laws, regulations, guidelines and standards.

1.1.1 Liability Conditions

The documentation has been prepared with care. The products described are, however, constantly under

development. For that reason the documentation is not in every case checked for consistency with

performance data, standards or other characteristics. In the event that it contains technical or editorial

errors, we retain the right to make alterations at any time and without warning. No claims for the

modification of products that have already been supplied may be made on the basis of the data, diagrams

and descriptions in this documentation.

All pictures shown in the documentation are exemplary. Illustrated configurations can differ from standard.

1.1.2 Trademarks

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC®and XTS®

are registered trademarks of and licensed by Beckhoff Automation GmbH.

Other designations used in this publication may be trademarks whose use by third parties for their own

purposes could violate the rights of the owners.

1.1.3 Patent Pending

The EtherCAT Technology is covered, including but not limited to the following patent applications and

patents: EP1590927, EP1789857, DE102004044764, DE102007017835 with corresponding applications

or registrations in various other countries.

The TwinCAT Technology is covered, including but not limited to the following patent applications and

patents: EP0851348, US6167425 with corresponding applications or registrations in various other

countries.

1.1.4 Copyright

©Beckhoff Automation GmbH & Co. KG.

The reproduction, distribution and utilization of this document as well as the communication of its contents

to others without express authorization are prohibited. Offenders will be held liable for the payment of

1.1.5 State at Delivery

All the components are supplied in particular hardware and software configurations appropriate for the

application. Modifications to hardware or software configurations other than those described in the

documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH & Co. KG.

1.1.6 Delivery conditions

In addition, the general delivery conditions of the company Beckhoff Automation GmbH & Co. KG apply.

CP29xx 3

Foreword

1.2 Description of safety symbols

The following safety symbols are used in this operating manual. They are intended to alert the reader to

the associated safety instructions.

Acute risk of injury!

DANGER

If you do not adhere the safety advise adjoining this symbol, there is immediate

danger to life and health of individuals!

Risk of injury!

WARNING

If you do not adhere the safety advise adjoining this symbol, there is danger to life and

health of individuals!

Hazard to individuals!

CAUTION

If you do not adhere the safety advise adjoining this symbol, there is obvious hazard to

individuals!

Hazard to devices and environment

Attention

If you do not adhere the notice adjoining this symbol, there is obvious hazard to

materials and environment.

Note or pointer

Note

This symbol indicates information that contributes to better understanding.

4CP29xx

Foreword

1.3 Basic safety measures

Before the Industrial PC is switched off, software that is running must be properly closed.

Otherwise it is possible that data on the storage medium is lost. Please read the section Switching the

Control Panel on and off.

Switch off all parts of the equipment, then uncouple the Control Panel

Warning

Before opening the housing, and whenever the Control Panel is not being used for

control purposes (such as during functional checks after a repair), all parts of the

equipment must first be switched off, after which the Control Panel is to be

disconnected from the equipment.

Disconnect the device by unplugging the connectors on the rear side of the Control Panel.

Items of equipment that have been switched off must be secured against being switched on again.

Do not exchange any parts when under power

Warning

When components are being fitted or removed, the supply voltage must be switched

off.

Fitting work on the Control Panel can result in damage:

• if metal objects such as screws or tools fall onto operating circuit boards

• if connecting cables internal to the Panel PC are removed or inserted during

operation.

CP29xx 5

Foreword

1.4 Operator’s obligation to exercise diligence

The operator must ensure that

• the product is only used as intended (see chapter Product Description)

• the product is in a sound condition and in working order during operation

• the product is operated, maintained and repaired only by suitably qualified and authorized

personnel

• the personnel is instructed regularly about relevant occupational safety and environmental

protection aspects, and is familiar with the operating manual and in particular the safety notes

contained herein

• the operation manual is in good condition and complete, and always available for reference at the

location of the product.

Do not open the housing of the Control Panel!

Note

For technical support contact Beckhoff Service.

1.4.1 National regulations

Depending on the type of machine and plant in which the Control Panel is used, national regulations

governing the controllers of such machines will apply, and must be observed by the operator. These

regulations cover, amongst other things, the intervals between inspections of the controller. The operator

must initiate such inspections in good time.

1.4.2 Procedure in the event of a fault

In the event of faults at the Control Panel, the list in the section Troubleshooting can be used to determine

the measures to be taken.

1.4.3 Operator requirements

Anyone who uses the Control Panel must have read these operating instructions and must be familiar

with all the functions of the software installed on the Industrial PC to which he has access.

6CP29xx

Product Description

2 Product Description

2.1 Product overview

Front view of CP29xx

The new Beckhoff panel generation with industry-standard multi-touch display offers a feature-laden

solution for any application. The wide selection of models offers different display sizes and formats as

well as custom designs. Even for single-touch users, this new panel generation offers an excellent price-

to-performance ratio and represents an economical alternative to other systems.

The multi-touch built-in Control Panel offer the following benefits:

• display sizes from 7-inch to 24-inch (16:9, 5:4, 4:3), landscape and portrait orientation

• multi-touch (PCT): e.g. for 5-finger or 2-hand touch operation

• high touch-point density for safe operation

• aluminium housing with glass front, front side IP65, rear side IP20

• CP29xx-0000 with integrated DVI/USB extension technology:

– DVI-E and USB-E 2.0 enable remote panel operation at a distance of up to 50 m from the PC

– USB-E 2.0 transmits USB 2.0 with 480 Mbit/s

– DVI-E input is compatible to the standard DVI output of a PC

• CP29xx-0010 with CP-Link 4 technology:

– enables remote panel operation at a distance of up to 100 m from the PC via a CAT.6A cable

– integrated or separate 24 V DC power supply

– CP-Link 4 transmits USB 2.0 with 100 MBit/s

• 2-port USB socket inside the Control Panel backplane

• optional electromechanical push-button extension.

CP29xx 7

Product Description

2.2 Appropriate Use

The multi-touch built-in Control Panel CP29xx is designed for industrial application in machine and plant

engineering. A multi-touch display is accommodated in a stainless steel housing. The Control Panel is

installed in the front of control cabinets.

The DVI/USB extension technology integrated in the CP29xx-0000 Control Panel enables remote Panel

operation at a distance of up to 50 m from the PC via a standard cable.

The CP-Link 4 connection technology integrated in the CP29xx-0010 Control Panel enables remote panel

operation at a distance of up to 100 m from the PC via a CAT.6Acable with integrated or separate

24 V DC power supply depending on the transmitter module.

Risk of explosion!

Danger

The Control Panel must not be used where there is a risk of explosion.

2.3 Access to the connectors

The connectors of the Control Panel are located at the rear side of the housing.

Connection block CP29xx-0000

For the pin assignment see chapter Interfaces CP29xx-0000.

8CP29xx

Product Description

Connection block CP29xx-0010

For the pin assignment see chapter Interfaces CP29xx-0010.

CP29xx 9

Product Description

2.4 Interfaces CP29xx-0000

X104

USB in

X102,

X103

USB out

Ground X101

Power

X106

DVI-E Input

X105

USB-E

Input

2.4.1 DVI-E Input (Digital Visual Interface-Extended) (X106)

X106

DVI-D 3 X 8-pole digital PCB installation (MOLEX 74320-9000 / 74320-9004)

The DVI-E connection (X 106) is used for transferring the video signal from the Industrial PC to the

Control Panel.

The graphics signal is transferred directly via a DVI cable over a distance of 50 m max. Such a cable

length leads to strong distortion of the graphics signal on arrival at the Control Panel. The CP29xx Control

Panel features a signal processor that restores the DVI signal. The PC requires a conventional DVI

output.

Pin Signal Pin Signal

1 Rx2- 13 Rx3+

2 Rx2- 14 + 5V DVI

3 GND 15 GND

4 Rx4- 16 HPD

5 Rx4+ 17 Rx0-

6 DDC CLK 18 Rx0+

7 DDC DAT 19 GND

8 AV SYNC 20 Rx5-

9 Rx1- 21 Rx5+

10 Rx1+ 22 GND

11 GND 23 RxC+

12 Rx3- 24 RxC-

2.4.2 USB-Extended Input (X 105)

X105

Connection via standard-RJ45-cabel, not crossed

The Control Panel is connected with the CU8801 USB to USB extended converter box via the USB-

Extended input (X 105).

In order to realize a distance of 50 m without hubs, with USB extended the USB signal is converted so

that it can be transferred via 50 m CAT5 cables commonly used for Ethernet wiring. In the Control Panel

the signal is converted back to USB.

10 CP29xx

Product Description

2.4.3 USB in (X 104)

X104

USB type B, PCB installation (FCI 61729-0010B USB Receptacle B-Type)

The Control Panel is connected with the Industrial PC via the USB port (X 104, connector type B).

USB3.0 standard is supported.

Pin Signal Pin Signal

1 5V 3 D+

2 D- 4 GND

2.4.4 USB out (X 102, X 103)

X102, X103

USB Type-A twin circuit board mounting (FCI 72309-0030B USB Double Receptacle A-Type)

The two USB interfaces (X102, X103,connector type A) are used for connecting peripheral devices with

USB connection. USB3.0 standard is supported in a distance of up to 3 m from the PC, from a distance of

3 m up to 50 m or if using USB-Extended, USB2.0 standard is supported.

Pin Signal Pin Signal

1 5V 3 D+

2 D- 4 GND

2.4.5 Ground connection

The Control Panel is grounded via the screw connection (Ground).

Malfunction possible with missing ground connection

Note

A proper ground connection of the device is absolutely necessary for the correct

function of the touchscreen.

2.4.6 Power Supply (X101)

X101

Socket 5-pol RM3.50 Sw Screw Clamp BL3.5/180F (WEIDMÜLLER 1615810000)

The power supply for the Control Panel is established via the socket (X101). The power supply connector

is included in delivery.

Pin Signal Pin Signal

1 NC 4 GND

2 NC 5 + 24 VDC Power Supply

CP29xx 11

Product Description

2.5 Interfaces CP29xx-0010

2.5.1 CP-Link 4 Architecture Description

2.5.1.1 CP-Link 4 – The Two Cable Display Link

The CP29xx-0010 multi-touch panels can be operated up to 100 m away from the PC. CP-Link 4

transfers DVI and USB together via a CAT.6Acable. The CU8802 CP-Link 4 transmitter box is connected

to the PC via DVI and USB, or else the C9900-E276 PCIe module for CP-Link 4 is installed in the PC.

CP-Link 4 – The Two Cable Display Link via the CU8802 transmitter box

CP-Link 4 – The Two Cable Display Link via the C9900-E276 PCIe module

12 CP29xx

Product Description

2.5.1.2 CP-Link 4 – The One Cable Display Link

The power supply for the Control Panel can also be provided via CP-Link 4. The CU8803 CP-Link 4

transmitter box is used instead of the CU8802 or the PCIe module. The Control Panel remains

unchanged. The CU8803 sender box provides power to the Control Panel via the CAT.6Acable, which

also transfers DVI and USB. The power supply socket of the panel is not used.

Don’t connect power supply socket if using One Cable technology

Attention

If using the CP-Link 4 - One Cable Display Link technology, do not connect anything to

the power supply socket of the Panel.

CP-Link 4 – The One Cable Display Link via the CU8803 transmitter box

CP29xx 13

Product Description

2.5.2 Interfaces

Ground

X102,

X103

USB out

X104

CP-Link 4

Input

X101

Power

2.5.3 USB out (X 102, X 103)

X102, X103

USB Type-A twin circuit board mounting (FCI 72309-0030B USB Double Receptacle A-Type)

The two USB interfaces (X102, X103,connector type A) are used for connecting peripheral devices with

USB connection. USB2.0 standard is supported.

Pin Signal Pin Signal

1 5V 3 D+

2 D- 4 GND

2.5.4 CP-Link 4 Input (X104)

X104

BA 1x8pole RJ45 Invers shield 2XLWL Lp-mount. Molex Nr: 43860-0016 Modular Jack

The Control Panel is connected with the PCIe module slot of the Industrial PC or the transmitter box

CU8802/ CU8803 via the CP-Link 4 Input (X 104).

Pin Signal Pin Signal

1 CP-Link4_0P 5 CP-Link4_2N

2 CP-Link4_0N 6 CP-Link4_1N

3 CP-Link4_1P 7 CP-Link4_3P

4 CP-Link4_2P 8 CP-Link4_3N

CU8803-0000 disconnect power supply

Attention

If using the CP-Link 4 - One Cable Display Link, the 24 V power supply of the CP-Link 4

transmitter box must be switched off before disconnecting the CP-Link 4 output

connection.

14 CP29xx

Product Description

CP-Link 4 cables with above 60 m cable-length with ferrite core

Note

CP-Link 4 cables with above 60 m cable-length are fitted with a ferrite core at one end.

If connecting the cable make sure to plug in the cable as shown in the picture with the

ferrite core Control Panel-sided.

ferrite core

CP-Link 4 cable connection

2.5.5 Power Supply (X101)

X101

Socket 5-pol RM3.50 Sw Screw Clamp BL3.5/180F (WEIDMÜLLER 1615810000)

The optional power supply for the Control Panel is established via the socket (X101), see chapter

CP-Link 4 Architecture Description. The power supply connector is included in delivery.

Pin Signal Pin Signal

1 NC 4 GND

2 NC 5 + 24 VDC Power Supply

Don’t connect power supply socket if using One Cable technology

Attention

If using the CP-Link 4 - One Cable Display Link technology, do not connect anything to

the power supply socket of the Panel.

2.5.6 Ground connection

The Control Panel is grounded via the screw connection (Ground).

Malfunction possible with missing ground connection

Note

A proper ground connection of the device is absolutely necessary for the correct

function of the touchscreen.

CP29xx 15

Product Description

2.6 Connection Kits/ Connection Cables/Accessories

One 5-pole power supply connector is provided with the Control Panel.

Optionally prefabricated connection kits for the DVI-E/ USB-E connection are available.

2.6.1 Connection Kits DVI-E/ USB-E connection for CP29xx-0000, optional

The following connection kits are available:

Connecting kit DVI-E/ USB-E Connection

C9900-K622 Connecting kit 1 m for CP29xx, containing:

1 m DVI cable, 1 m USB cable

C9900-K623 Connecting kit 3 m for CP29xx, containing:

3 m DVI cable, 3 m USB cable

C9900-K624 Connecting kit 5 m for CP29xx, containing:

5 m DVI cable, 5 m USB cable

C9900-K625 Connecting kit 10 m for CP29xx, containing:

10 m DVI cable, 10 m CAT 5 cable for USB-E-2.0, USB to USB-E-2.0 converter