Beurer FT 85 User manual

FT85
EN Non-contact thermometer
Instructions for use

2
Read these instructions for use carefully and keep them for later use, be sure to make them accessible to other users and
observe the information they contain.
Dear customer,
Thank you for choosing a product from our range. Our name stands for high-quality, thoroughly tested products for applications
in the areas of heat, gentle therapy, blood pressure/diagnosis, weight, massage and air.
Please read these instructions for use carefully and observe the information they contain.
With kind regards,
Your Beurer team
ENGLISH
Contents
1. Signs and symbols...................................................................... 3
2. Intended use ............................................................................... 4
3. Warnings and safety notes.......................................................... 4
3.1 Risks to the user ................................................................... 4
3.2 Risks to the device................................................................ 5
3.3 Notes on handling batteries .................................................. 5
4. Information about this thermometer ........................................... 6
5. Unit description ........................................................................... 8
6. Initial use .................................................................................... 9
7. Switching on and setting the thermometer ............................... 10
8. Forehead measurement .......................................................... 12
9. Measuring object temperature/room temperature .................. 15
10. Error messages ....................................................................... 15
11. Batteries ................................................................................. 16
12. Cleaning the device................................................................. 17
13. Storing the device ................................................................... 17
14. Disposing of the device........................................................... 17
15. Technical data ......................................................................... 17
16. Guidelines ............................................................................... 19
17. Warranty / service ................................................................... 19

3
Included in delivery
Check that the exterior of the delivery cardboard packaging is intact and make sure that all components are present. Before use,
ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have
any doubts, do not use the device and contact your retailer or the specified Customer Service address.
• C linical thermometer
• 2 x 1.5V AAA batteries (LR03)
• I nstructions for use
1. Signs and symbols
The following symbols appear in these instructions for use and on the device:
WARNING
Warning notice indicating a risk of injury or dam-
age to health.
Storage/Transport
Permissible storage and transport temperature
and humidity
IMPORTANT
Safety note indicating possible damage to the
device/accessory.
Operating
Permissible operating temperature and humidity
Note
Note on important information. IP 22
Device protected against foreign objects
≥12.5mm and against water dripping at an
angle
Observe the instructions for use Serial number
Application part, type BF Important information/tip
Disposal in accordance with the Waste Electrical
and Electronic Equipment EC Directive – WEEE
w
Cross-reference with another section

4
The CE labelling certifies that the product com-
plies with the essential requirements of Directive
93/42/EEC on medical devices.
21
PAP
Dispose of packaging in an environmentally
friendly manner
Manufacturer
2. Intended use
This thermometer is intended for non-contact measurement of forehead temperature. You can also measure the temperature of
objects and rooms with this thermometer. The thermometer is suitable for domestic use. It allows you to quickly and easily meas-
ure body temperature. Values are saved automatically.
3. Warnings and safety notes
3.1 Risks to the user
• O nly use the device once you have read and understood these instructions for use.
• R etain these instructions for use. The instructions for use must be accessible to all users. All instructions must be followed.
• T he thermometer needs to be in the room in which the measurement is taken for at least 30 minutes before use.
• A fter physical activity, a bath or spending time outdoors, wait approx. 30 minutes before you take a measurement on your fore-
head.
• T he FT85 thermometer is only designed for the measuring area on the human body stated in the instructions for use.
• M easure your temperature regularly to obtain your normal average temperature. If you suspect you have a fever, simply com-
pare your normal average temperature with the temperature measured currently.
• D o not self-diagnose or self-medicate on the basis of the measurements without consulting your doctor. In particular, do not
start taking any new medication or change the type and/or dosage of any existing medication without prior approval.
• T he device is only intended for the purpose stated in these instructions for use.
• T he manufacturer is not liable for damage resulting from improper or careless use.
• C hildren must not be allowed to use the device. Medical devices are not toys.
• C heck before each use that the lens is intact. If it is damaged, please contact your retailer or the service address.
• D o not touch the lens with your fingers.

5
• T he measurements taken by you are for your information only – they are no substitute for a medical examination. Consult a doc-
tor before you undertake any medical treatment.
• C lean the thermometer after each use ( w 12. Cleaning the device).
• S hould you have any questions about using the device, please contact either your retailer or Customer Services.
3.2 Risks to the device
• D o not drop the device or subject it to any mechanical impacts.
• The use of the device may be limited in the presence of electromagnetic disturbances. This could result in issues such as error
messages or the failure of the display/device.
• Avoid using this device directly next to other devices or stacked on top of other devices, as this could lead to faulty operation.
If, however, it is necessary to use the device in the manner stated, this device as well as the other devices must be monitored
to ensure they are working properly.
• The use of accessories other than those specified or provided by the manufacturer of this device can lead to an increase in elec-
tromagnetic emissions or a decrease in the device’s electromagnetic immunity; this can result in faulty operation.
• Failure to comply with the above can impair the performance of the device.
• D o not expose the device to direct sunlight, extreme temperatures or high humidity.
• D o not expose the device to liquids. The device is not waterproof. Avoid all direct contact with water or other liquids.
• D o not open or repair the device yourself. Have the device repaired by authorised service centres only, otherwise its warran-
ty is invalidated.
• Portable and mobile HF communication systems may interfere with this device.
3.3 Notes on handling batteries
• I f your skin or eyes come into contact with battery fluid, rinse the aected area with water and seek medical assistance.
• Choking hazard! Small children may swallow and choke on batteries. Store batteries out of the reach of small children.
• O bserve the plus (+) and minus (-) polarity signs.
• I f a battery has leaked, put on protective gloves and clean the battery compartment with a dry cloth.
• P rotect batteries from excessive heat.
• Risk of explosion! Do not throw batteries into a fire.
• D o not charge or short-circuit batteries.

6
• I f the device is not to be used for a relatively long period, take the batteries out of the battery compartment.
• U se identical or equivalent battery types only.
• A lways replace all batteries at the same time.
• D o not use rechargeable batteries.
• D o not disassemble, split or crush the batteries.
4. Information about this thermometer
The temperature measurement varies depending on the part of the body where the measurement is taken. In a healthy person, the
variance can be between 0.2°C and 1°C (0.4 °F and 1.8°F) in dierent parts of the body.
Normal temperature range with various thermometers:
Measurements Thermometer used
Forehead temperature 35.8°C to 37.6°C (96.4°F to 99.7°F) Forehead thermometer
Ear temperature 36.0°C to 37.8°C (96.8°F to 100.0°F) Ear thermometer
Oral temperature 36.0°C to 37.4°C (96.8°F to 99.3°F) Conventional thermometer
Rectal temperature 36.3°C to 37.8°C (97.3°F to 100.0°F) Conventional thermometer
Beurer tip
• T emperatures measured with dierent thermometers should never be compared with one another.
• T ell your doctor what type of thermometer you used to take your temperature and on what part of the body. Also bear
this in mind if you are diagnosing yourself.
Holding the thermometer in your hand for too long before taking a measurement can cause the device to warm up. This
means the measurement could be incorrect.

7
Influences on body temperature
• A person’s individual metabolism
• A ge
Body temperature is higher in babies and toddlers than in adults. Greater temperature fluctuations occur faster and more often in
children. Normal body temperature decreases with age.
• C lothing
• O utside temperature
• T ime of day
Body temperature is lower in the morning and increases throughout the day towards evening.
Activities
• P hysical and, to a lesser extent, mental activities increase body temperature.
Beurer tip
Taking the body temperature provides a current measurement of a person’s temperature. If you are uncertain about in-
terpreting the results or if the values are abnormal (e.g. fever), please consult your doctor. This also applies in the case
of slight temperature changes if there are other symptoms of illness such as agitation, heavy sweating, flushed skin, fast
pulse rate, tendency to collapse, etc.

8
5. Unit description
1 Display
2MODE/MEM button
3LIGHT/SET button
4Measuring sensor
5/SCAN button
6Battery compartment lid
Buttons Functions
MODE/MEM
MODE Sets the measurement mode.
MEM Displays the saved measurements.
LIGHT/SET LIGHT Manual switch on of the illuminated display.
SET Sets the basic functions.
/SCAN Switch on the device.
Starts the temperature measurement.
6
5
1
2
3
4

9
Display description
1Object temperature mode
12 11 10 9
1 2 3 4
5
6
7
8
14
15
13
2Room temperature mode
3Forehead temperature mode
4Acoustic signal symbol
5 Year
6Memory function
7 Date
8Temperature/memory space number display
9Battery status indicator
10 Measurement ≥ 38.0°C (≥ 100.4 °F) “fever”
11 Measurement < 37.5°C (< 99.5 °F) “no fever”
12 Illuminated display symbol
13 Temperature measurement unit Celsius
14 Temperature measurement unit Fahrenheit
15 Year/date/time display
6. Initial use
Inserting battery
• R emove the battery compartment cover.
• I nsert the two batteries into the battery compartment ensuring correct polarity.
• U se exclusively brand-name batteries of the type: 2x 1.5V Micro (Alkaline Type LR03). Making
absolutely sure that you insert them with the correct polarity as marked. Do not use rechargeable batteries.
• T hen close the battery compartment by fitting the cover and clicking it in position.
The thermometer automatically switches on and the settings menu appears in the display ( w 7. Switching on and setting the ther-
mometer).

10
7. Switching on and setting the thermometer
To switch on the thermometer, briefly press the /SCAN button.
After a brief self-test and two short beeps the thermometer is ready for forehead measurement. The device always starts up in
forehead temperature mode .
Set the basic functions
This menu allows you to set the following functions individually, one after another.
Temperature measurement unit Time format Date Time Illuminated display Acoustic signal
Temperature measurement unit
Insert the batteries or press and hold the LIGHT/SET button for 3 seconds when the ther-
mometer is switched on. The temperature measurement unit flashes on the display (Fig. 1).
You can set the device to display the temperature in degrees Celsius (°C) or degrees Fahr-
enheit (°F).
• To display the temperature in Celsius, select °C using the MODE/MEM button and con -
firm with the LIGHT/SET button.
• To display the temperature in Fahrenheit, select °F using the MODE/MEM button and
confirm with the LIGHT/SET button.
Fig. 1
Time format
The time format flashes on the display (Fig. 2).
• Use the MODE/MEM button to set your preferred time format, and confirm with the
LIGHT/SET button.
Fig. 2

11
Date
The year flashes on the display (Fig. 3).
• Use the MODE/MEM button to set the year, and confirm with the LIGHT/SET button.
The day/month flashes on the display (Fig. 4).
• Use the MODE/MEM button to set the day and month, and confirm with the LIGHT/
SET button (Fig. 5).
If the hour format is set as 12 h, the day/month display sequence is reversed. Be sure
to set the date and time correctly. Otherwise, you will not be able to save your meas-
ured values correctly with a date and time and access them again later.
Fig. 3 Fig. 4
Fig. 5
Time
The hour flashes on the display (Fig. 6).
• Use the MODE/MEM button to set the hour, and confirm with the LIGHT/SET button.
The minute flashes on the display (Fig. 7).
• Use the MODE/MEM button to set the minute, and confirm with the LIGHT/SET button.
In the 12 h format, the time is displayed with AM/PM.
Fig. 6 Fig. 7
Illuminated display
The illuminated display symbol flashes on the display (Fig. 8).
You can activate or deactivate the automatic illuminated display (appears following fore-
head temperature measurement).
• To activate the automatic illuminated display, use the MODE/MEM button to select ,
and confirm with the LIGHT/SET button.
• To deactivate the automatic illuminated display, use the MODE/MEM button to select
, and confirm with the LIGHT/SET button. Fig. 8

12
Illuminated display
You can also activate the illuminated display manually by briefly pressing the LIGHT/SET button.
The display lights up for 5 seconds.
The automatic and manual illuminated display cannot be used while measurement is in progress.
Acoustic signal
The acoustic signal symbol flashes on the display (Fig. 9).
You can activate/deactivate the acoustic signals (device activation, measurement in pro-
gress, measurement completion).
• To activate the acoustic signals, use the MODE/MEM button to select , and confirm
with the LIGHT/SET button.
• To deactivate the acoustic signals, use the MODE/MEM button to select , and con-
firm with the LIGHT/SET button. Fig. 9
8. Forehead measurement
Beurer tip
Remember:
• P hysical activity, increased perspiration on the forehead, taking vasoconstrictive medication and skin irritations can
distort the measurement.
• T he forehead, or the temples, must be free from perspiration and cosmetics.
• W e recommend that you take three measurements on the forehead. If the three measurements are dierent, use the
highest value.
• I f the forehead area is covered in hair, sweat or dirt, clean the area and then wait for 10 minutes to improve the preci-
sion of the measurement.
• I t is important that you keep the thermometer still during measurement. Moving the thermometer during measurement
may cause imprecise measurements.

13
Forehead temperature mode
• T o switch on the thermometer, briefly press the /SCAN button. After a brief self-test and two short
beeps the device is ready for forehead temperature measurement. The device is in forehead temper-
ature mode. You can tell this from the symbol on the display.
Fig. 10
• H old the thermometer 2 to 3 cm in front of the forehead measuring point (Fig. 11). Press the /SCAN
button.
Fig. 11
If the measurement is less than 37.5°C (99.5°F), appears in the display to indicate no fever; this
indicates that the body temperature is in the normal range.
Fig. 12

14
Forehead temperature mode
If the measurement is over 38°C (100.4°F), appears in the display to indicate that the body tem-
perature is above the normal range.
Fig. 13
The measurement is automatically saved with the date/time and the “fever” / “no fever” classification.
The device is ready to take another measurement when two short beeps sound and the forehead symbol stops flashing.
The device automatically switches o after approx. 60 seconds or you can press the /SCAN button for 5 seconds to
switch it o.
Displaying stored measurements
The device only stores measurements in forehead temperature mode . The device automatically stores the values from the
last 60 measurements.
When 60 memory spaces are exceeded, the oldest value is deleted.
• T he memory can be called up as follows:
• With the thermometer switched on, press and hold the MODE/MEM button for 3 seconds.
The most recent measurement is displayed.
• Pressing the MODE/MEM button again will display the measured value.
• I n the upper line, the time and date are displayed alternately.

15
9. Measuring object temperature/room temperature
Object temperature mode
If you want to measure an object temperature with this thermometer, switch to object tem-
perature mode.
• W ith the thermometer switched on, briefly press the MODE/MEM button. The device
switches to the object temperature mode (Fig. 14).
• H old the thermometer 2 to 3 cm from the measuring point. Briefly press the /SCAN
button and read the temperature on the display (Fig. 15).
The device automatically switches o after approx. 60 seconds or you can press the
/SCAN button for 5 seconds to switch it o. Fig. 14 Fig. 15
Measurements taken in object temperature mode are not stored.
Room temperature mode
If you want to use the thermometer to measure the room temperature you need to switch to room tem-
perature mode.
• W ith the thermometer switched on, briefly press the MODE/MEM button twice.
The device switches to room temperature mode .
• T he room temperature is immediately displayed (Fig. 16).
The device automatically switches o after approx. 60 seconds or you can press the /SCAN button for
5 seconds to switch it o. Fig. 16
Measurements taken in room temperature mode are not stored.
10. Error messages
Error mes-
sage Problem Solution
Measurement during self-test, device not yet ready for
measurement. Wait until the forehead symbol stops flashing.
Room temperature below 15°C or over 40°C (<59°F,
>104°F).
Room temperature must be between 15°C and 40°C
(59°F – 104°F).

16
Error mes-
sage Problem Solution
(1) Forehead temperature mode: The recorded tempera-
ture is higher than 42.2°C (108 °F).
(2) Object temperature mode: The recorded temperature
is higher than 80°C (176°F).
Operate the thermometer only within the specified tem-
perature ranges. In the event of a repeated error message,
contact your retailer or Customer Services.
(1) Forehead temperature mode: The recorded tempera-
ture is lower than 34°C (93.2 °F).
(2) Object temperature mode: The recorded temperature
is lower than 0°C (32°F).
Operate the thermometer only within the specified tem-
perature ranges. In the event of a repeated error message,
contact your retailer or Customer Services.
The batteries are empty. Replace the batteries.
11. Batteries
Changing the batteries
The device requires two AAA (LR03) batteries.
• O pen the battery compartment.
To do this, push the battery compartment down.
• T ake the used batteries out of the battery compartment.
• I nsert new batteries.
Make sure that the batteries are inserted the correct way round.
• C lose the battery compartment.
Disposing of batteries
• E mpty, completely flat batteries must be disposed of through specially designated collection boxes, recycling points or elec-
tronics retailers. You are legally required to dispose of the batteries.
• T he codes below are printed on batteries containing harmful substances:
Pb = Battery contains lead, Cd = Battery contains cadmium, Hg = Battery contains mercury

17
12. Cleaning the device
• T he measuring sensor is the most sensitive part of the thermometer. Be very careful with the measuring sensor when
cleaning the device.
• D o not use any harsh cleaning products.
• A lways observe all safety notes for users and the device.
w 3. Warnings and safety notes
Clean the measuring sensor after each use. Use a soft cloth or cotton bud that can be moistened with disinfectant or 70% alcohol.
To clean the entire device, please use a soft cloth slightly moistened with a mild soapy solution. Under no circumstances may liq-
uid enter the device.
Do not use the device again until it is completely dry.
13. Storing the device
The device must not be stored or used at an excessively high or low temperature or humidity ( w 15. Technical data), in sunlight,
in association with an electrical current or in dusty locations. Measurement inaccuracies can otherwise occur.
If prolonged storage is planned, you should remove the batteries.
14. Disposing of the device
For environmental reasons, do not dispose of the device in the household waste at the end of its useful life.
Dispose of the device at a suitable local collection or recycling point.
Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment).
If you have any questions, please contact the local authorities responsible for waste disposal.
15. Technical data
If the device is not used according to the instructions specified, perfect functionality cannot be guaranteed!
The accuracy of this thermometer has been carefully checked and it has been developed with a long service life in mind.
If the device is used for commercial medical purposes, it must be regularly tested for accuracy by appropriate means. Precise in-
structions for checking accuracy may be requested from the service address.
We reserve the right to make technical changes to improve and develop the product.

18
Type FT85
Measurement method Non-contact infrared measurement
Basic functions Forehead temperature measurement
Object temperature measurement
Room temperature measurement
Measurement units Celsius (°C) or Fahrenheit (°F)
Operating conditions 15°C to 40°C (59°F to 104°F) at a relative humidity of < 95%
Storage and transport conditions -20°C to 50°C (-4°F to 122°F) at a relative humidity of <85%
Measuring distance 2 to 3 cm from the measuring point
Measurement range and accura-
cy of forehead temperature meas-
urement
Forehead temperature measurement
34°C to 42.2°C (93.2°F to 108°F)
Measurement accuracy 34 °C to 42.2°C: ±0.2°C (93.2°F to 108°F: ±0.4°F)
Clinical repeat precision Forehead: Children 1 – 5 years ± 0.07°C (0.13°F)
Adults ± 0.08°C (0.14°F)
Measurement range and accuracy
Object temperature measurement Object temperature measurement 0 °C to 80°C (32°F to 176°F) Measurement accuracy ±4% or ±2°C (±4°F)
Memory function
Body temperature measurement Automatically stores the last 60measurements.
Acoustic signal With device activation, during measurement, when measurement is complete (can be set).
Display LCD display
Energy saving functions Device automatically switches o after 1 minute.
Dimensions
Width x depth x height 161 x 42.8 x 36 mm
Weight 67 g (without batteries)
2 x AAA (LR03) batteries Batteries last for approx. 2000 measurements
Extra activated functions such as acoustic signal or illuminated display reduce the battery life.
The serial number is located on the device or in the battery compartment.

19
16. Guidelines
This device complies with EU Medical Devices Directive 93/42/EEC, the German Medical Devices Act (Medizinproduktegesetz),
the ASTM (American Society for Testing and Materials) E1965 - 98 and the European Standard EN60601-1-2 (in accordance with
CISPR 11, IEC61000-3-2, IEC61000-3-3) and is subject to particular precautions with regard to electromagnetic compatibility.
The device is suitable for use in all environments listed in these instructions for use, including domestic environments.
17. Warranty / service
Beurer GmbH, Söflinger Straße 218, 89077 Ulm, Germany (hereinafter referred to as “Beurer”) provides a warranty for this prod-
uct, subject to the requirements below and to the extent described as follows.
The warranty conditions below shall not affect the seller’s statutory warranty obligations which ensue from the sales
agreement with the buyer.
The warranty shall apply without prejudice to any mandatory statutory provisions on liability.
Beurer guarantees the perfect functionality and completeness of this product.
The worldwide warranty period is 5 years, commencing from the purchase of the new, unused product from the seller.
The warranty only applies to products purchased by the buyer as a consumer and used exclusively for personal purposes in the
context of domestic use.
German law shall apply.
During the warranty period, should this product prove to be incomplete or defective in functionality in accordance with the following
provisions, Beurer shall carry out a repair or a replacement delivery free of charge, in accordance with these warranty conditions.
If the buyer wishes to make a warranty claim, they should approach their local retailer in the first instance: see the attached
“International Service” list of service addresses.
The buyer will then receive further information about the processing of the warranty claim, e.g. where they can send the product
and what documentation is required.

20
A warranty claim shall only be considered if the buyer can provide Beurer, or an authorised Beurer partner, with
- a copy of the invoice/purchase receipt, and
- the original product.
The following are explicitly excluded from this warranty:
- deterioration due to normal use or consumption of the product;
- accessories supplied with this product which are worn out or used up through proper use (e.g. batteries, rechargeable batteries,
cus, seals, electrodes, light sources, attachments and nebuliser accessories);
- products that are used, cleaned, stored or maintained improperly and/or contrary to the provisions of the instructions for
use, as well as products that have been opened, repaired or modified by the buyer or by a service centre not authorised by
Beurer;
- damage that arises during transport between manufacturer and customer, or between service centre and customer;
- products purchased as seconds or as used goods;
- consequential damage arising from a fault in this product (however, in this case, claims may exist arising from product liabil-
ity or other compulsory statutory liability provisions).
Repairs or an exchange in full do not extend the warranty period under any circumstances.
795.06_FT85_2019-12-03_01_IM2_BEU_EN Subject to errors and changes
Beurer GmbH • Söflinger Straße 218 • 89077 Ulm, Germany
www.beurer.com • www.beurer-healthguide.com