Bissell SPOTCLEAN TURBO AUTOMATE 1558X User manual

H
O
M
E
C
L
E
A
N
I N
G
E
X
P
E
R
T
S
E
S
T
.
1
8
7
6
U
.
S
.
A
.
Product Overview
1. Power Switch
2. Power Cable
3. Quick Release Cable Wrap
4. Dirty Water Tank
5. Dirty Water Tank Handle
6. Clean Water Tank Carry Handle
7. Clean Water Tank
8. Hose Grip
9. Spray Trigger
10. Hose Secure Latch
11. Flex Hose
Go online for a comprehensive walkthrough
of your new purchase!
This guide has everything you need to get ready for first use,
including setting up, using and maintaining your machine,
but online you’ll find additional resources like tips and
troubleshooting, videos, product registration, parts, and more.
Go to support.BISSELL.com.
What’s in the Box? ..........................................3
Cleaning Formulas ..........................................3
Filling the Clean Water Tank.....................3
Getting Ready to Clean...............................4
Using the Tools .................................................. 5
After-Cleaning Care.......................................6
Storing Your Machine.................................... 7
Troubleshooting................................................ 7
Warranty................................................................8
1
2
3
4
5
7
8
9
11
10
6
SPOTCLEAN™ TURBO AUTOMATE™
MODEL 1558X

2BISSELL.com
IMPORTANT SAFETY INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
• This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use of
the appliance in a safe way and understand the
hazards involved. Cleaning and user maintenance
shall not be made by children without supervision.
• Children should be supervised to ensure that they
do not play with the appliance.
• Unplug from electrical socket when not in use,
before cleaning, maintaining or servicing the
appliance, and if your appliance has an accessory
tool with a moving brush, before connecting or
disconnecting the tool.
• Do not immerse in water or liquid.
• Keep hair, loose clothing, fingers, and all parts of
body away from openings and moving parts of the
appliance and its accessories.
• If the supply cable is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified person in order to avoid a hazard.
• Do not run appliance over cable.
• Do not use with damaged cable or plug.
• Do not pull or carry by cable, use cable as a
handle, close door on cable, or pull cable around
sharp edges or corners.
• Keep cable away from heated surfaces.
• If the appliance has a hand held accessory like pet
brush, motor driven head, etc., the user shall avoid
entrapment.
• Do not leave appliance when plugged in.
• Use only the type and amount of liquids specified
under the operations section of this guide.
• Liquid must not be directed towards equipment
containing electrical components.
• Always connect to a properly earthed electrical socket. Do not modify
earthed plug.
• Always install float before any wet pick-up operation.
• To unplug, grasp the plug, not the cable.
• Do not handle plug or appliance with wet hands.
• Turn off all controls before unplugging.
• Plastic film can be dangerous. To avoid danger of suffocation, keep
away from children.
• Use only as described in this user guide.
• Use only manufacturer’s recommended attachments.
• If appliance is not working as it should, has been dropped, damaged,
left outdoors, or dropped into water; do not attempt to operate it and
have it repaired at an authorised service center.
• Do not put any object into openings.
• Do not use with any opening blocked; keep free of dust, lint, hair, and
anything that may reduce air flow.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as
petroleum, or use in areas where they may be present.
• Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner,
etc.).
• Do not use appliance in an enclosed space filled with vapours given
off by oil base paint, paint thinner, some moth-proofing substances,
flammable dust, or other explosive or toxic vapours.
• Do not pick up hard or sharp objects such as glass, nails, screws, coins,
etc.
• Do not pick up anything that is burning or smoking, such as cigarettes,
matches or hot ashes.
• Do not use without filters in place.
• Do not expose to rain. Store indoors.
• Floor slippery when wet.
READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE. When using an electrical appliance, basic precautions
should be observed, including the following:
SAVE THESE INSTRUCTIONS
ORIGINAL INSTRUCTIONS.
FOR OPERATION ON A 220-240 VOLT A.C. 50-60 HZ POWER
SUPPLY ONLY.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
IMPORTANT INFORMATION
• Keep appliance on a level surface.
• If your appliance has a motorised Brush Roll, do not leave machine running in the same spot without the handle fully upright.
• To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to internal components may result.
• Plastic tanks are not dishwasher safe. Do not put tanks in dishwasher.

BISSELL.com 3
Body Tools
(varies by model)
Full-Size Formula
(varies by model)
What’s in the Box?
Standard accessories may vary by model.To identify what should be included with your purchase,
please refer to the “Carton Contents” list located on the carton top flap.
Filling the Formula Tank
Find more formulas at BISSELL.com.
1. Remove tank from the back
of the machine by lifting the
Clean Water Tank Carry Handle.
2. Unscrew the black cap and
remove bottle insert.
3. Fill tank with warm tap
water (140° F/60° C MAX) to
the water fill line.
4. Add 60 mL/2 oz of BISSELL
formula to the tank.
5. Place bottle insert back into
tank and tighten the black cap.
6. Place the tank back onto
the machine.
Choosing Your Desired Formula
Always use genuine BISSELL® formulas in your machine. Other formulas may harm the machine and
void the warranty.
Clean + Protect
Removes deep down dirt
PET Stain & Odor
Removes tough pet messes
PRO MAX Clean +
Protect
Our most powerful formula
for tough, ground-in
dirt & stains
PET PRO OXY Urine
Eliminator
Our best formula for tough
pet messes
Filling the Clean Water Tank

4BISSELL.com
Getting Ready to Clean
Tools vary by model. To shop all tools and accessories, visit BISSELL.com/parts.
Before You Clean
1. Vacuum to remove loose dirt from area to be cleaned.
2. Spray any BISSELL® stain pretreat formula to soiled areas or stains.
3. Allow to sit for at least 3 minutes.
4. Clean following instructions below.
Choose Your Desired Tool
Tools vary by model.
15 cm Tool
Great for cleaning stairs
and larger furniture areas.
3-in-1 Stair Tool
Made for tricky areas like
curves, corners and tread
of carpeted stairs.
Crevice Tool
Best for narrow spaces
and crevices that are hard
to reach.
HydroRinse™ Self-Cleaning
Hose Tool
Use to clean out your hose
after each use.

BISSELL.com 5
1. Release the hose by
twisting the secure latch.
2. Attach your desired tool to
the Hose Grip until you hear a
“click”.
3. Twist the Quick Release
Cable Wrap and unwind the
cable to plug into outlet.
4. Press the Power Switch ON. 5. Point the tool approximately
1 inch above the spot or stain
and press the Spray Trigger.
6. Release the Spray Trigger
and use the bristles to scrub the
area. To lift away the stain, apply
downward pressure while moving
the tool slowly toward you.
Attaching and Using the Tool
Using the Tools
Search your tool on support.BISSELL.com for how-to videos.
Using the HydroRinse™ Tool
1. Hold the hose and tool in
an upright position with the
machine ON. Hold down the
trigger for 30 seconds. Be sure
to empty the Dirty Water Tank
after use (see page 6).
2. You can store tool on
machine, as shown.

6BISSELL.com
Cleaning Your Machine
For more helpful maintenance tips, check out support.BISSELL.com.
1. Remove and rinse the tools
under clean, running water.
Allow tools to dry.
2. Wrap and secure the Flex
Hose and Power Cable.
Emptying the Dirty Water Tank
We have additional tips for maintaining your machine at support.BISSELL.com.
1. When the Dirty Water Tank
reaches the “FULL” line it is
time to empty.
2. Remove Dirty Water Tank
and carry to disposal area.
3. Unlock by rotating the
handle up and over the back of
the tank.
4. Remove lid and pour out
dirty water. Rinse out tank to
remove any debris.
5. Replace the tank lid and
rotate the handle forward to
lock back into place.
6. Before placing tank back
into the machine, remove any
debris from the red filter.
WARNING To reduce the risk of fire, electric shock or injury, turn power OFF before performing maintenance
or troubleshooting.

BISSELL.com 7
Storing Your Machine
Store machine in protected, dry area at room temperature (4° C - 40° C).
WARNING To reduce the risk of electric shock, turn power OFF and disconnect from electrical outlet before
performing maintenance or troubleshooting.
NOTICE To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
Problem Possible Cause Remedies
Reduced
Spray or No
Spray
Spray nozzle clogged. Clean spray nozzle using an unfolded paper clip.
Clean Water Tank empty. Check/fill tank.
Clean Water Tank insert
clogged.
Clean insert at bottom of Clean Water Tank.
Pump needs priming. Gently lift Clean Water Tank while pressing the
spray trigger OR gently squeeze clean tank while
pressing spray trigger.
Clean Water Tank not fully
seated.
Remove and reseat Clean Water Tank.
Carpet
Cleaner
Won’t Pick
Up Cleaning
Solution
Poor tool position. Reposition on surface, follow recommended
cleaning procedures.
Dirty Water Tank is full. Empty Dirty Water Tank.
Excess solution in Flex Hose. Lift tool and point upwards to allow water in hose
to flow into the Dirty Water Tank.
Incorrect cleaning formula. Use BISSELL® Portable Machine formulas only.
Dirty Water Tank is
improperly seated onto base.
Remove and reseat tank.
Dirty tank plug is unplugged. Push in Dirty Water Tank plug until properly
sealed.
Dirty Water
Tank Leaking
Duckbill valve is dirty. Clean the duckbill valve located at the bottom of
the Dirty Water Tank. Once cleaned, make sure it is
placed securely back in place.
Float stack not fully locked
on Dirty Water Tank.
Remove float stack and twist until arrow is aligned
with lock symbol on Dirty Water Tank.
Dirty Water Tank not properly
seated onto machine.
Remove and reseat onto machine.
Note: Any other servicing should be performed by an authorized service representative.
Troubleshooting
Below are some of the issues you may run into. If you don’t see the issue you’re experiencing
below, visit support.BISSELL.com.

©2020 BISSELL Inc. All rights reserved.
Part Number 1625536 09/20 RevC
Warranty
This warranty gives you specific legal rights,
in addition to rights you may have under the
Australian Consumer Law. If you need additional
instruction regarding this warranty or have
questions regarding what it may cover, please
contact your local BISSELL® Consumer Care on
the details set out below.
It may be necessary to obtain some of your
personal information, such as a mailing address,
to fulfill terms of this warranty. Any personal
data will be handled pursuant to BISSELL’s
Privacy Policy, which can be found at
global.BISSELL.com/privacy-policy.
BISSELL® Two-Year Warranty
Subject to the *conditions identified below,
BISSELL will repair or replace (with new,
refurbished, lightly used, or remanufactured
components or products), at BISSELL’s option,
free of charge from the date of purchase by the
original purchaser, for two years any defective
or malfunctioning part due to manufacturer
defect. This warranty applies to product used for
personal purposes, and not commercial or rental
service. This warranty does not apply to fans or
routine maintenance or consumable components
such as filters, belts, brush rolls, etc., damage
or malfunction caused by negligence, abuse,
neglect, unauthorized repair, or any other use
not in accordance with the user guide. BISSELL
recommends that the original packaging be kept
for the duration of the warranty period in case
such need arises within the warranty period that
the item needs re-packing and transportation.
*Conditions of Warranty
Subject to whether such loss is reasonably
foreseeable, BISSELL and its in-country
distributors are not liable for incidental or
consequential damages of any nature associated
with the use of this product.
This warranty is in addition to other rights or
remedies under law. Nothing in this warranty
excludes, limits or modifies any liability of
BISSELL which is imposed by law, or limits or
modifies any remedy available to the consumer
which is granted by law. To make a claim under
this warranty contact BISSELL Australia PTY
LTD (details below). Contact BISSELL prior to
returning any goods. Where agreed, BISSELL will
reimburse reasonable postage / handling costs
(if any) for returning goods to BISSELL. To claim
expenses incurred in making a claim under this
warranty please provide BISSELL with a copy of
the receipt of the expenses by email or post.
For Australian Consumers Only: Our goods
come with guarantees that cannot be excluded
under the Australian Consumer Law. You are
entitled to a replacement or refund for a
major failure and compensation for any other
reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable
quality and the failure does not amount to a
major failure.
Consumer Care
Australia
Telephone: [phone]
Website: www.BISSELL.com.au
New Zealand
Telephone: [phone]
Website: www.BISSELL.co.nz
But wait, there’s more!
Join us online for a complete guide to your new product, including
troubleshooting, parts and more. Go to BISSELL.com.
VIDEOSINFO PARTS