Body Craft BC-XFT User manual

BCXFT.01.01
TF- BodyCraftXFT Functional Trainer
max. 150 kg
~ 180 Min.
CM
305 / 328 kg
Assembly and Operating Instructions
Art. No. BC-XFT
L 155 | W 127 | H 211

2
XFT

3
Content
1 GENERAL INFORMATION 7
1.1 Technical Data 7
1.2 Personal Safety 8
1.3 Set-Up Place 9
2 ASSEMBLY 10
2.1 General Instructions 10
2.2 Scope of Delivery 11
2.3 Assembly 14
3 STORAGE AND TRANSPORT 46
3.1 General Instructions 46
4 TROUBLESHOOTING, CARE AND MAINTENANCE 47
4.1 General Instructions 47
4.2 Faults and Fault Diagnosis 47
4.3 Maintenance and Inspection Calendar 48
5 DISPOSAL 48
6 RECOMMENDED ACCESSORIES 49
7 ORDERING SPARE PARTS 50
7.1 Serial Number and Model Name 50
7.2 Parts List 51
7.3 Exploded Drawing 54
8 WARRANTY 55
9 CONTACT 57

4
XFT

5
Intended Use
The equipment may only be used for its intended purpose.
Theequipmentisonlysuitableforhomeuse.Theequipmentisnotsuitableforsemi-professional(e.g.
hospitals,associations,hotels,schools,etc.)andcommercialorprofessionaluse(e.g.tnessstudios).
Legal Notice
Sport-Tiedje GmbH
Europe’s No. 1 for home tness
International Headquarters
Flensburger Straße 55
24837 Schleswig
Germany
Management:
Christian Grau
Sebastian Campmann
Dr. Bernhard Schenkel
No. HRB 1000 SL
Local Court Flensburg
European VAT Number: DE813211547
Disclaimer
BodyCraft® is a registered brand of the company Fitness Authority Industrial Co., LTD. All rights
reserved. Any use of this trademark without the explicit written permission of Fitness Authority
Industrial Co., LTD is prohibited.
Product and manual are subject to change. Technical data can be changed without advance notice.
Dear customer,
thank you for choosing training equipment of the brand Bodycraft. Bodycraft equipment inspires
with its multifunctionality and excellent quality. In terms of innovation and technology, it is one of
the highest quality tness equipment for home use. Bodycraft multi gyms, for example, oer a very
wide range of exercise possibilities. This ranges from traditional strength training such as bench
presses and rehabilitation exercises to workout for complex sports like golf, tennis or badminton.

6
XFT
ABOUT THIS MANUAL
Please carefully read the entire manual before installation and rst use. The manual will help you to
quickly set up the system and explains how to safely use it. Make sure that all persons exercising with
the equipment (especially children and persons with physical, sensory, mental or motor disabilities)
are informed about this manual and its contents in advance. In case of doubt, responsible persons
must supervise the use of the equipment.
Due to ongoing changes and software optimisations, the manual may have to be updated. If
you notice any discrepancies during assembly or use, please refer to the manual uploaded to the
webshop. The latest manual is always available there.
This equipment has been manufactured according to the latest safety knowledge. As far as possible,
potential safety hazards which could cause injury have been eliminated. Make sure to carefully follow
the instructions and that all parts are securely in place. If required, read through the
instructions again to correct any mistakes.
Please pay close attention to the safety and maintenance instructions given here.
The contract partner cannot be held liable for damage to health, accidents or
damage to the equipment when it is not used in accordance with these instructions.
The following safety instructions may appear in this manual:
࣑ATTENTION
This notice indicates potentially hazardous situations which, if not avoided, may result in
property damage.
⚠CAUTION
This notice indicates potentially hazardous situations which, if not avoided, may result in slight
or minor injuries!
⚠WARNING
This notice indicates potentially hazardous situations which, if not avoided, may result in death
or serious injuries!
⚠DANGER
This notice indicates potentially hazardous situations which, if not avoided, will result in death
or serious injuries!
LNOTICE
This notice indicates further useful information.
Retain these instructions in a safe place for future reference, maintenance or when ordering
replacement parts.

7
1 GENERAL INFORMATION
1.1 Technical Data
Weight and Dimensions
XFT
Packaging dimensions (L x W x H) and article weight (gross, incl. packaging) approx.:
Box 1: 199.6 cm x 40 cm x 11.7 cm 65.8 kg
Box 2: 159 cm x 59.6 cm x 25.4 cm 69.2 kg
Box 3: 112.3 cm x 49.1 cm x 31.1 cm 58.1 kg
Box 4: 212.7 cm x 28.5 cm x 15.5 cm 60 kg
Box 5: 196.8 cm x 18.4 cm x 11.7 cm 11.8 kg
Weight Plates
67.5 kg/150 lbs: 28 cm x 19 cm x 15 cm 31.27 kg (2x)
90 kg/200 lbs: 28 cm x 19 cm x 15 cm 31.27 kg (2x)
27 cm x 14 cm x 13 cm 22.42 kg (1x)
Set-up dimensions (L x W x H): 155 cm x 127 cm x 211 cm
Article weight (net, excl. packaging): 242 kg (without weight stack)
305 kg / 328 kg (with weight stack)
Maximum user weight (chin up bar): 150 kg
Weight Stack
Weight stack: 1 (150 / 200 lbs)
Weight plates: 14+1 / 19+1
Cable length: 211 cm ; 834 cm ; 1098 cm
Cable material: Steel
Cable coating: Nylon
Pulley diameter: 90 mm ; 114 mm
Transmission ratio (press bar): 1:1
Transmission ratio (cable on one side): 2:1

8
XFT
1.2 Personal Safety
⚠DANGER
+ Before you start using the equipment, you should consult your physician that this type of
exercise is suitable for you from a health perspective. Particularly aected are persons who:
have a hereditary disposition to high blood pressure or heart disease, are over the age of 45,
smoke, have high cholesterol values, are overweight and/or have not exercised regularly in
the past year. If you are under medical treatment that aects your heart rate, medical advice
is absolutely essential.
+ Note that excessive training can seriously endanger your health. Please also note that
heart rate monitoring systems can be inaccurate. If you notice any signs of weakness,
nausea, dizziness, pain, shortness of breath, or other abnormal symptoms, stop exercising
immediately and seek advice from your doctor if necessary.
⚠WARNING
+ This equipment may not be used by children under the age of 14.
+ Children should not be allowed unsupervised access to the equipment.
+ Persons with disabilities must have a medical license and must be under strict observation
when using the equipment.
+ The equipment is strictly for use by one person at a time.
+ If your equipment provides a safety key, the clip of the safety key must be attached to your
clothing before starting your training. In the event of a fall, the EMERGENCY STOP of the
equipment can be initiated.
+ Keep your hands, feet and other body parts, hair, clothing, jewellery and other objects well
clear of moving parts.
+ During use, wear suitable sports clothing rather than loose or baggy clothing.When wearing
sports shoes, make sure they have suitable soles, preferably made of rubber or other non-
slip materials. Shoes with heels, leather soles, studs or spikes are unsuitable. Never exercise
barefoot.
⚠CAUTION
+ If your equipment needs to be connected to the power supply with a mains cable, make
sure that the cable is not a potential tripping hazard.
+ Make sure that nobody is within the range of motion of the equipment during training so as
not to endanger you or other persons.
࣑ATTENTION
+ Do not insert any objects of any kind into the openings of the device.

9
1.3 Set-Up Place
⚠WARNING
+ Do not place the equipment in main corridors or escape routes.
⚠CAUTION
+ Choose a location in which to place the equipment such that there is enough free space/
clearance to the front, the rear and to the sides of the equipment.
+ The training room should be well ventilated during training and not be exposed to any
draughts.
+ Choose the place in which to set up the equipment such that there is enough free space/
clearance to the front, the rear and to the sides of the equipment.
+ The set-up and mounting surface of the equipment should be at, loadable and solid.
+ If your device is to be mounted on the wall/ceiling, make sure that you use the appropriate
assembly material to avoid possible damages or personal injuries. The contractual partner
accepts no liability for this.
࣑ATTENTION
+ The device may only be used in one building, in suciently tempered and dry rooms
(ambient temperatures between 10°C and 35°C). The equipment should not be used
outdoors or in rooms with high humidity (over 70%) like swimming pools.
+ A oor protective mat/equipment underlay can help to protect high-quality oor coverings
(parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight
unevenness.

10
XFT
2 ASSEMBLY
2.1 General Instructions
⚠DANGER
+ Do not leave any tools, packaging materials such as foils or small parts lying around,
as otherwise there is a danger of suocation for children. Keep children away from the
equipment during assembly.
⚠WARNING
+ Pay attention to the instructions attached to the equipment in order to reduce the risk of
injuries.
⚠CAUTION
+ Ensure to have sucient room for movement in each direction during assembly.
+ The assembly of the equipment must be carried out by at least two adults. If in doubt, seek
the help of a third technically skilled person.
࣑ATTENTION
+ To prevent damage to the equipment and the oor, assemble the equipment on a mat or
packaging board.
LNOTICE
+ In order to make the assembly as simple as possible, some screws and nuts to be used can
already be pre-assembled.
+ Ideally, assemble the equipment at its later set-up place.

11
2.2 Scope of Delivery
The scope of delivery consist of the following parts. At the beginning, check whether all parts
and tools belonging to the device are included in the scope of delivery and whether damage has
occurred. In the event of complaints, the contractual partner must be contacted directly.
⚠CAUTION
If parts of the scope of delivery are missing or damaged, the assembly must not be carried out.

12
XFT

13

14
XFT
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
LNOTICE
First loosely screw all parts together and check that they t properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assembly of the Base Legs and Base Frame
LNOTICE
Make sure to align the base legs and base frame correctly, so the pulley holder is facing the rear
side.
1. Attach the right base leg (2R) to the base frame (1) with two bolts (93) and two spring washers
(120) as well as two bolts (100) and two spring washers (121).
2. Attach the left base leg (3L) to the base frame (1) with two bolts (93) and two spring washers
(120) as well as two bolts (100) and two spring washers (121).
3. Tighten all bolts by beginning with the bolts (100).

15

16
XFT
Step 2: Assembly of the Main Upright Frames, Part 1
1. Attach one oval plug (140) to the connector frame (15).
LNOTICE
+ Please note that the following step musst be carried out for both main upright frames (5),
even though only one is shown.
+ Do not tighten the screws completely until instructed to.
2. Remove the pre-assembled bolt (A) and washer (B) that secure the weight cable from both main
upright frames (5).
3. Loosely attach one of the main upright frames (5) to the base frame (1) with four bolts (100),
eight washers (118) and four nylon nuts (131). Make sure the guide rod holder is facing the front
like shown.
4. Remove eight bolts (122) from the connector frame (15) [g. 1].
5. Rotate the four steel plates (44) like shown in gure 2.
6. Attach the connector frame (15) to the main upright frame (5).

17

18
XFT
Step 3: Assembly of the Main Upright Frames, Part 2
LNOTICE
Do not tighten the screws completely until instructed to.
1. If not already done in the previous step, remove the pre-assembled bolt (A) and washer (B) from
the second main upright frame (5).
2. Insert the main upright frame (5) to the base frame (1) and slide the main upright frame (5) to
the other side of the connector frame (15) [g.2].
3. Loosely attach the main upright frame (5) to the base frame (1) with four bolts (100), eight
washers (118) and four nylon nuts (131) [g. 1].
4. Rotate the steel plates (44) back to their intended positions and secure with the eight previously
removed bolts (122) [g. 3].

19

20
XFT
Step 4: Assembly of the Top Frame
LNOTICE
Do not tighten the bolts completely until instructed to.
1. Place the top frame (13) onto the main upright frames (5) by pulling the weight cables (54)
through the the outer pulley holders as shown in gure 1.
2. Loosely attach the top frame (13) to the main upright frames (5) with a total of eight bolts (100),
16 washers (118) and eight nylon nuts (131).
3. Route each weight cable (54) over one 90 mm pulley (52).
4. Now attach each pulley (52) to the top frame (13) with one bolt (98) and one nylon nut (131)
each [g. 2].
LNOTICE
When completed, the weight cables (54) should be facing downwards through the top frame
(13).