Bosch PVA-1EB User manual

Communications Systems - PVA-1EB Call station emergency button
PVA-1EB Call station emergency button
PAVIRO
uAlarm button for call station
uEN 54-16 system certification
The PVA-1EB is an optional emergency button for
installation in the PAVIRO call stations. For more
information, refer to the call station manual.
Certifications and approvals
Emergency standard certifications
Europe EN54‑16
Emergency standard compliance
UK BS 5839-8
Austria ÖNORMF3033
Environmental directive compliance
Safety EN62368-1
Immunity EN 50130-4
Emissions EN 61000-6-3
ICES-003
FCC-47 part 15B class A
Environment EN 50581
Maritime EN 60945
Conformity
Europe CE/CPR
Australia RCM
Conformity
Environment RoHS
Installation/configuration notes
Labeling
1. Remove button ➊ from housing ➋
2. Remove red diffusor ➌ from lens ➎ using a sharp
tool (such as a knife)
3. Label the film insert ➍
4. Re-assemble the button including the film insert
and mount into the housing ➋

Communications Systems - PVA-1EB Call station emergency button 2 | 3
Assembly in call station
1. Disconnect the call station from all connectors.
2. Unscrew the call station baseplate (4 screws ➊).
3. Carefully remove the baseplate from the upper
part, start on the top left corner of the call sta-
tion.
4. Unplug the connecting cable from the CN1 plug
connector ➋.
5. Prepare installation location ➌: Use a sharp object
(scriber or similar) to carefully punch through and
cut out the pre-cut rectangle on the inside of the
housing. Perform any follow-up work that may be
required to the installation location (e.g. filing,
trimming).
6. Mount the button into the installation location,
and press in evenly (it must be possible for the
cover cap to open upward).
7. Depending on whether the right/middle/left in-
stallation location is used, plug the ribbon cable ➍
into plug connector CN201/CN202/CN203 on the
circuit board.
8. Plug the connecting cable into CN1 again.
9. Carefully re-attach the call station baseplate.
10. Re-connect the connections.
11. Configure the button using the software.
2
3
1
Parts included
Quantit
y
Component
1Button element with cover
1Preconfigured 4-pin connecting cable
1Installation note
Technical specifications
Mechanical
Product dimensions (Height x Width
x Depth)
30mm x 21mm x 21mm
Net weight 0.01kg
Shipping weight 0.02kg

Communications Systems - PVA-1EB Call station emergency button 3 | 3
Environmental
Operating temperature -5°C to +45°C (+23°F to +113°F)
Storage and transport temperature -25°C to +70°C (-13°F to +158°F)
Humidity (non-condensing) 5% to 90%
Altitude Up to 2000 m
Ordering information
PVA-1EB Call station emergency button
Optional emergency button that can be installed in the
PVA-15CST Call station.
Order number PVA-1EB | F.01U.397.469 F.01U.312.985
Represented by:
Europe, Middle East, Africa: Germany: North America: Asia-Pacific:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
[email protected]
emea.boschsecurity.com
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany
www.boschsecurity.com
Bosch Security Systems, LLC
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.us
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.asia
Data subject to change without notice | 202107161211 | V11 | July 16, 2021 © Bosch Security Systems 2021