Bosch LTC 1311/20 FlexiDome I Instruction sheet

Bosch Video Management System
en Configuration Manual

Bosch Video Management System Table of Contents | en 3
Bosch Sicherheitssysteme GmbH Configuration Manual Configuration Client | V3 | 2010.07
Table of Contents
1 Using the Help 10
1.1 Finding information 10
1.2 Printing the Help 10
2 Introduction 12
3Systemoverview 13
3.1 Hardware requirements 13
3.2 Software requirements 13
3.3 License requirements 13
4 Network configuration 14
4.1 Installing hardware 15
5 Getting started 16
5.1 Installing the software modules 16
5.2 Installing Bosch VMS Archive Player 16
5.3 Activating the software licenses 16
5.4 Starting Configuration Client 17
5.5 Starting Operator Client 18
5.6 Starting Bosch VMS Archive Player 18
5.7 Configuring the language of Configuration Client 18
5.8 Configuring the language of Operator Client 19
5.9 Adding a new license 19
6 Configuring devices 20
6.1 Detecting NVRs, their recorded encoders, and decoders 21
6.2 Detecting VRM devices, live only and local storage encoders, VIDOS NVRs 22
6.3 Adding a device 23
6.4 Configuring an encoder / decoder 26
6.5 Configuring a decoder for use with a CCTV keyboard 26
6.6 Configuring multiple encoders / decoders 27
6.7 Configuring a DiBos system 28
6.8 Configuring a Bosch Allegiant device 28
6.9 Configuring a startup Command Script 28
6.10 Changing the network address of a workstation 29
6.11 Enabling Forensic Search on a workstation 29
6.12 Assigning an analog monitor group to a workstation 29
6.13 Configuring an analog monitor group 29
6.14 Configuring a communication device 30
6.15 Configuring a peripheral device 30
6.16 Configuring network monitoring 30
6.17 Configuring a CCTV keyboard (workstation) 30
6.18 Configuring a CCTV keyboard (decoder) 31
6.19 Configuring an I/O module 31

4en | Table of Contents Bosch Video Management System
Configuration Client | V3 | 2010.07 Configuration Manual Bosch Sicherheitssysteme GmbH
6.20 Configuring an Allegiant CCL emulation 31
6.21 Adding a VRM device with iSCSI storage 32
6.22 Configuring an iSCSI device 33
6.23 Adding a LUN 34
6.24 Formatting a LUN 34
6.25 Adding a local storage or live only device 35
7 Configuring NVRs 36
7.1 Configuring a Primary NVR 36
7.2 Switching an NVR to a Failover NVR 37
7.3 Switching an NVR to a Redundant NVR 37
7.4 Configuring a Failover NVR 37
7.5 Configuring a Redundant NVR 37
7.6 Assigning NVRs to Failover NVRs 38
7.7 Assigning NVRs to a Redundant NVR 38
7.8 Displaying information on an NVR 39
7.9 Changing the network address of an NVR / Failover NVR / Redundant NVR 39
8 Configuring the structure 40
8.1 Configuring the Logical Tree 40
8.2 Adding a device to the Logical Tree 41
8.3 Removing a tree item 41
8.4 Managing resource files 42
8.5 Adding a Command Script 43
8.6 Managing pre-configured camera sequences 43
8.7 Adding a camera sequence 44
8.8 Adding a folder 45
8.9 Adding a map 45
8.10 Adding a link to another map 45
8.11 Assigning a map to a folder 46
8.12 Managing devices on a map 46
8.13 Adding a document 47
9 Configuring cameras and recording settings 48
9.1 Copying and pasting in tables 48
9.2 Configuring the stream quality 49
9.3 Configuring camera properties 50
9.4 Configuring recording settings (only NVR) 50
9.5 Configuring recording settings (only VRM and Local Storage) 51
9.6 Configuring port settings 52
9.7 Configuring PTZ camera settings 52
9.8 Copying recording settings (NVR only) 53
10 Configuring schedules 54
10.1 Configuring a Recording Schedule 54
10.2 Adding a Task Schedule 55
10.3 Configuring a standard Task Schedule 55
10.4 Configuring a recurring Task Schedule 55

Bosch Video Management System Table of Contents | en 5
Bosch Sicherheitssysteme GmbH Configuration Manual Configuration Client | V3 | 2010.07
10.5 Removing a Task Schedule 56
10.6 Adding holidays and exception days 56
10.7 Removing holidays and exception days 56
10.8 Renaming a schedule 57
11 Configuring events and alarms 58
11.1 Copying and pasting in tables 58
11.2 Removing a table row 59
11.3 Managing resource files 59
11.4 Configuring an event 59
11.5 Duplicating an event 59
11.6 Logging user events 60
11.7 Configuring user event buttons 60
11.8 Creating a Compound Event 61
11.9 Editing a Compound Event 62
11.10 Configuring an alarm 63
11.11 Configuring settings for all alarms 63
12 Configuring Command Scripts 65
12.1 Managing Command Scripts 65
12.2 Configuring a Command Script to be started automatically 66
12.3 Importing a Command Script 66
12.4 Exporting a Command Script 66
12.5 Configuring a startup Command Script 66
13 Configuring user groups 68
13.1 Creating a user 68
13.2 Creating a user group 69
13.3 Copying user group permissions 69
13.4 Creating a dual authorization user group 69
13.5 Configuring LDAP settings 70
13.6 Associating an LDAP group 70
13.7 Scheduling user logon permission 70
13.8 Configuring permissions for devices 71
13.9 Configuring permissions for events and alarms 71
13.10 Configuring global permissions 71
13.11 Configuring various priorities 72
13.12 Configuring camera permissions 72
13.13 Configuring decoder permissions 72
13.14 Configuring user interface settings 72
14 Managing configuration data 74
14.1 Activating the working configuration 74
14.2 Activating a configuration 74
14.3 Exporting configuration data 75
14.4 Exporting configuration data to OPC 75

6en | Table of Contents Bosch Video Management System
Configuration Client | V3 | 2010.07 Configuration Manual Bosch Sicherheitssysteme GmbH
15 Configuration examples 76
15.1 Adding a Bosch ATM/POS bridge 76
15.2 Adding a Bosch Allegiant input alarm 77
15.3 Adding and configuring 2 Dinion IP cameras with VRM recording 77
16 Global Configuration Client windows 80
16.1 Configuration window 80
16.2 Menu commands 81
16.3 Activation Manager dialog box 82
16.4 Activate Configuration dialog box 82
16.5 License Manager dialog box 82
16.6 License Activation dialog box 83
16.7 Global Alarm Settings dialog box 83
16.8 Stream Quality Settings dialog box 83
16.9 Options dialog box 83
17 Devices page 85
17.1 Initial Device Scan dialog box 85
17.2 Network Scan dialog box 85
17.3 Bosch VMS Scan Wizard 86
17.4 Failover NVR Manager dialog box 87
17.5 IP Device Configuration dialog box 87
17.6 Set IP Addresses dialog box 87
17.7 Set Display Names dialog box 88
17.8 NVRs / Failover NVRs / Redundant NVRs page 88
17.8.1 Global Settings page 88
17.8.2 Disk Storage page 88
17.8.3 Camera Storage page 90
17.8.4 Assigned NVRs page 91
17.8.5 Assigned NVR page 91
17.8.6 Add Network Path dialog box 91
17.8.7 Add Local NVR Drive dialog box 92
17.9 Vidos NVRs page 92
17.10 DiBos page 92
17.10.1 Add DiBos System dialog box 92
17.10.2 Settings page 93
17.10.3 Cameras page 93
17.10.4 Inputs page 93
17.10.5 Relays page 93
17.11 Matrix Switches page 93
17.11.1 Connection page 93
17.11.2 Cameras page 94
17.11.3 Outputs page 94
17.11.4 Inputs page 95
17.12 Workstation page 95
17.12.1 Settings page 95
17.12.2 Assigned Analog Monitor Groups page 96
17.13 Decoders page 96
17.14 Monitor Groups page 97

Bosch Video Management System Table of Contents | en 7
Bosch Sicherheitssysteme GmbH Configuration Manual Configuration Client | V3 | 2010.07
17.14.1 Settings page 97
17.14.2 Advanced Configuration page 97
17.15 Communication Devices page 98
17.15.1 E-mail/SMTP Server dialog box 99
17.15.2 Add SMS Device dialog box 99
17.15.3 SMTP Server page 99
17.15.4 Send Test E-mail dialog box 100
17.15.5 GSM Settings / SMSC Settings page 100
17.16 POS + ATM page 101
17.16.1 Add Bosch ATM/POS-Bridge dialog box 101
17.16.2 Bosch ATM/POS-Bridge page 101
17.16.3 Inputs page 102
17.16.4 ATM Settings page 102
17.17 Virtual Inputs page 102
17.17.1 Add Virtual Inputs dialog box 102
17.18 SNMP page 103
17.18.1 Add SNMP dialog box 103
17.18.2 SNMP Trap Receiver page 103
17.18.3 SNMP Trap Logger dialog box 103
17.19 CCTV Keyboards page 104
17.20 I/O Modules page 105
17.20.1 ADAM page 105
17.20.2 Inputs page 105
17.20.3 Relays page 105
17.21 Allegiant CCL Emulation page 106
17.22 VRM Devices page 106
17.23 VRM Settings page 107
17.23.1 Advanced page 107
17.23.2 SNMP tab 108
17.23.3 iSCSI System Access page 108
17.23.4 Default Configuration page 108
17.23.5 Load Balancing page 109
17.23.6 iqn-Mapper dialog box 109
17.23.7 LUNs page 109
17.23.8 Add LUN dialog box 110
17.24 Live Only page 110
17.25 Local Storage page 110
18 Encoders / Decoders page 111
18.1 Main Settings > Unit Access page 111
18.2 Main Settings > Date/Time page 112
18.2.1 DST Dialog dialog box 112
18.3 Advanced Settings > Video input page 112
18.3.1 Camera name 112
18.3.2 Display stamping 113
18.3.3 Input termination 114
18.3.4 Image quality 114
18.3.5 Source type 114
18.4 Advanced Settings > Audio page 115

8en | Table of Contents Bosch Video Management System
Configuration Client | V3 | 2010.07 Configuration Manual Bosch Sicherheitssysteme GmbH
18.5 Privacy Masks page 115
18.6 Advanced Settings > Recording Management page 115
18.7 Advanced Settings > Recording preferences page 116
18.8 Advanced Settings > VCA page 116
18.8.1 Motion detector (MOTION+ only) 117
18.8.2 Select Area diaog box 118
18.8.3 Tamper detection 118
18.8.4 Reference check 119
18.9 Advanced Settings > Audio Alarm 120
18.10 Decoder > Decoder page 120
18.10.1 Decoder profile 120
18.10.2 Monitor display 121
18.11 Interfaces > Relay page 121
18.11.1 Relay number 121
18.11.2 Relay states 122
18.12 Interfaces > Periphery page 122
18.12.1 COM1 122
18.13 Network > Network page 122
18.13.1 Network 122
18.13.2 DynDNS 124
18.14 Network > Advanced page 124
18.14.1 SNMP 124
18.14.2 802.1x 124
18.14.3 RTSP 125
18.15 Network > Multicasting page 125
18.16 Network > JPEG posting page 126
18.17 Service > License page 126
19 Maps and Structure page 127
19.1 Resource Manager dialog box 127
19.2 Select Resource dialog box 128
19.3 Sequence Builder dialog box 128
19.4 Add Sequence dialog box 129
19.5 Add Sequence Step dialog box 130
19.6 Add URL dialog box 130
19.7 Select Map for Link dialog box 130
20 Schedules page 131
20.1 Recording Schedules page 131
20.2 Task Schedules page 131
21 Cameras and Recording page 133
21.1 Cameras page 133
21.2 Recording settings pages 135
21.3 Copy Recording Settings dialog box (NVR only) 136
21.4 Stream Quality Settings dialog box 136
21.5 PTZ Settings dialog box 138

Bosch Video Management System Table of Contents | en 9
Bosch Sicherheitssysteme GmbH Configuration Manual Configuration Client | V3 | 2010.07
22 Events page 139
22.1 Command Script Editor dialog box 140
22.2 Create Compound Event / Edit Compound Event dialog box 141
22.3 Select Script Language dialog box 141
23 Alarms page 142
23.1 Global Alarm Settings dialog box 142
23.2 Select Image Pane Content dialog box 143
23.3 Select Resource dialog box 144
23.4 Alarm Options dialog box 144
24 User Groups page 147
24.1 User Properties page 147
24.2 User Group Properties page 148
24.3 LDAP Server Settings dialog box 148
24.4 Copy User Group Permissions dialog box 150
24.5 Select User Groups dialog box 150
24.6 Logon Pair Properties page 151
24.7 Logical Tree page 151
24.8 Events and Alarms page 151
24.9 Permissions page 152
24.10 Priorities page 153
24.11 Camera Permissions page 154
24.12 Decoder Permissions page 155
24.13 User Interface page 155
25 Concepts 156
25.1 Alarm handling 156
25.2 Connecting Bosch Allegiant Matrix to Bosch Video Management System 157
25.2.1 Bosch Allegiant Connection Overview 157
25.2.2 Configuring the control channel 159
25.2.3 Bosch Allegiant Satellite System Concept 160
25.3 Connecting CCTV keyboard to Bosch Video Management System 161
25.3.1 Scenarios for CCTV keyboard connections 161
25.3.2 Connecting a CCTV keyboard to a decoder 163
25.3.3 Updating CCTV keyboard firmware 164
26 Troubleshooting 165
26.1 Configuring the desired language in Windows 167
26.2 Reestablishing the connection to a CCTV keyboard 167
26.3 Fixing the recording setting for Intercom functionality 167
26.4 Reducing the number of Allegiant cameras 168
Glossary 169
Index 182

10 en | Using the Help Bosch Video Management System
Configuration Client | V3 | 2010.07 Configuration Manual Bosch Sicherheitssysteme GmbH
1 Using the Help
To find out more about how to do something in Bosch Video Management System, access the
online Help using any of the following methods.
To use the Contents, Index, or Search:
On the Help menu, click Help. Use the buttons and links to navigate.
To get Help on a window or dialog:
On the toolbar, click .
OR
Press F1 for help on any program window or dialog.
1.1 Finding information
You can find information in the Help in several ways.
To find information in the Online Help:
1. On the Help menu, click Help.
2. If the left-hand pane is not visible, click the Show button.
3. In the Help window, do the following:
Texts of the user interface are marked bold.
The arrow invites you to click on the underlined text or to click an item in the application.
Click to get step-by-step instructions
Related Topics
Click to display a topic with information on the application window you currently use.
This topic provides information on the application window controls.
Section 25 Concepts provides background information on selected issues.
1.2 Printing the Help
While using the Online Help, you can print topics and information right from the browser
window.
Click: To:
Contents Display the table of contents for the Online Help. Click each book to
display pages that link to topics, and click each page to display the
corresponding topic in the right-hand pane.
Index Search for specific words or phrases or select from a list of index
keywords. Double-click the keyword to display the corresponding topic in
the right-hand pane.
Search Locate words or phrases within the content of your topics. Type the word
or phrase in the text field, press ENTER, and select the topic you want
from the list of topics.
CAUTION!
Medium risk (without safety alert symbol): Indicates a potentially hazardous situation.
If not avoided, this may result in property damage or risk of damage to the unit.
Cautionary messages should be heeded to help you avoid data loss or damaging the system.
NOTICE!
This symbol indicates information or a company policy that relates directly or indirectly to the
safety of personnel or protection of property.