Boya BY-BM6060 User manual

BY-BM6060
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Introduction
Thanks for purchasing BOYA!
The BY-BM6060 focuses on super-cardioid characteristics and resistance to low-noise
circuitry noise, it’s well-suited to a variety of applications from independent films, TV
programs to documentaries.
Initiate switchable high-pass filter control to roll of the low-frequency noise at 150Hz
such as rumbles and traffic.
Its 3-pin XLR output follows 24-48V phantom power supply. When your devices are not
phantom powered, the BY-BM6060 can be powered by one AA battery.
In addition, the BY-BM6060 includes a fur windshield and foam windscreen for an
intelligible sound effect and secure protection.
Package Contents:
•BY-BM6060 Microphone
•Shock mount
•Foam windscreen
•Fur windshield
•Zipper bag
•User Manual
•Warranty card

Product Structure:
1. Microphone boom
2. Power indicator
3. High-pass filter switch
4. 3-pin XLR output
5. Shock mount
6. Foam windscreen
7. Fur windshield

Installing the battery
1. Unscrew the microphone by rotating the base clockwise and pull out the cover
properly to reveal the battery compartment.
2. Insert one AA battery into the compartment aligning as the right polarity
3. Close the compartment and rotate it anticlockwise to tighten it.