Bristan Chill User manual

SAFETY
NOTE !
AFTERCARE INSTRUCTIONS
Your fitting has a high quality finish and should be
treated with care to preserve the visible surfaces.
All surface finishes will wear if not cleaned correctly,
the only safe way to clean your mixer is to wipe with a
soft damp cloth. Stains can be removed using washing
up liquid. All bath cleaning powders and liquids will
damage the surface of your fitting even the non-
scratch cleaners.
GUARANTEE
All products are manufactured to the highest standards and a 5 year
guarantee covers any defect in manufacture.
In the interests of continuous product development we reserve the right to alter specification
as necessary
TELEPHONE HELP LINE: 0844 701 6273
Bristan Group Limited
Birch Coppice Business Park
Dordon
Tamworth
Staffordshire
B78 1SG
UK
Web Site: www.bristan.com
Telephone: [phone]
Facsimile: 0844 7016275
Email: [email protected]
(FI CL ACC) (Rev. D2)
Chill
Bathroom Accessories
Prior to drilling into walls, check there are no
hidden electrical wires, cables or water supply
pipes with the aid of an electronic detector. If
you use power tools do not forget:
• Wear eye protection
• Unplug equipment after use
Fitting Instructions
& Contents List
Please keep these instructions for future reference and
for the ordering of spare parts.

SAFETY
NOTE !
2
3
4
5
61
Congratulations on your purchase of this high quality Chill Bathroom
Accessory. Before proceeding with the installation please carefully
read the instructions in order to ensure proper care and assembly of
this accessory.
INSTALLATION
1. Identify all components and check for completeness,
particularly before arranging fitting.
2(a). Single wall fixing: Establish the position for the accessory (4)
and mark out the fixing holes using the wall bracket (2) as a
template.
2(b). Double wall fixing: Either use the accessory as a template to
establish the position for the wall fixings and mark out the fixing
holes or measure the distance between the fixing holes.
3. Drill holes to suit, and insert wall plugs (1) if required.
Prior to drilling into walls, check there are no
hidden electrical wires, cables or water supply
pipes with the aid of an electronic detector. If
you use power tools do not forget:
• Wear eye protection
• Unplug equipment after use
4. Screw the wall bracket (2) to the wall.
5. Loosen off the grub screw (but do not remove) and place the
accessory over the wall bracket with the grub screw (5) at the
bottom.
6. Tighten up the grub screw (5) until the accessory (4) is secure
against the wall.
7. See over the page for aftercare instructions.
1. Wall plug
2. Wall bracket
3. Screw
4. Accessory
5. Grub screw
6. Hexagonal key
Please Note: -
In the unlikely event you find a part missing please contact our Customer Service
Help line on 0844 7016273 or email enquir[email protected]m for immediate dispatch of part.