Bristan W BATH08 C User manual

Installation Instructions & User Guide
Installation Instructions & User GuideInstallation Instructions & User Guide
Installation Instructions & User Guide
IMPORTANT: Please keep these instructions for future reference and request of replacement parts
IMPORTANT: Please keep these instructions for future reference and request of replacement partsIMPORTANT: Please keep these instructions for future reference and request of replacement parts
IMPORTANT: Please keep these instructions for future reference and request of replacement parts
Traditional xposed Bath Waste with Overflow
Traditional xposed Bath Waste with OverflowTraditional xposed Bath Waste with Overflow
Traditional xposed Bath Waste with Overflow

Introduction
IntroductionIntroduction
Introduction
Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have designed this product with
your enjoy ent in ind. To ensure that it works to its full potential, it needs to be fitted correctly. These fitting
instructions have been created to give you all of the infor ation you need and, if you need any further help, please
do not hesitate to give us a call on 0844 701 6273.
Installation
InstallationInstallation
Installation
1. Identify all co ponents are present prior to installation.
2. Re ove screw (2) for flange (3), then re ove the flange fro the waste body (6).
3. Secure the waste body (6) against the underneath of the bath with the sealing washer (5) in position. Use the
flange (3) with the rubber washer (4) between the flange & the bath, securing the asse bly with screw (2).
4. It is reco ended that a silicon sealant be applied to all sealing faces of the washer (4).
5. Replace screw (2). Do Not over tighten.
6. Use the conical washer (7) & nut (8), in the order shown, to hold the tube (9) into the waste body (6).
7. Use the sa e process to asse ble the overflow elbow (10) to the tube (9).
8. Secure the overflow elbow (10) to the bath using the sealing washer (11) & the overflow washer (12),
positioned either side of the bath surface. Then place the overflow (13) o top of the overflow washer (12) &
secure the asse bly using screw (14).
9. It is reco ended that a silicon sealant be applied to both sealing faces of washer (12).
10. Tighten screw (14). (DO NOT OVER TIGHTEN).
11. Check all joints & connections for leaks.
12. See over the page for aftercare instructions.
Components
ComponentsComponents
Components
1. Plug
2. Screw
3. Flange
4. Rubber washer
5. Sealing washer
6. Waste body
7. Conical washer
8. Nut
9. Chro e tube (over sizes)
10. Overflow elbow
11. Overflow seal washer
12. Overflow
13. Fixing screw

Bristan
BristanBristan
Bristan Guarantee
GuaranteeGuarantee
Guarantee
2 year
2 year 2 year
2 year -
--
- Pu ps, Power Showers
Pu ps, Power ShowersPu ps, Power Showers
Pu ps, Power Showers
2 year parts. 1 year labour (subject to registration).
Electric Showers/Instantaneous Water Heaters
Electric Showers/Instantaneous Water HeatersElectric Showers/Instantaneous Water Heaters
Electric Showers/Instantaneous Water Heaters
2 year parts. 1 year labour (subject to registration).
5 year
5 year 5 year
5 year - Taps and Mixers
Taps and MixersTaps and Mixers
Taps and Mixers
5 year parts and 1 year labour (subject to proof of purchase).
Shower Valves
Shower ValvesShower Valves
Shower Valves
5 year parts. 5 year labour (subject to registration), else 1 year with proof of purchase.
Accessories
AccessoriesAccessories
Accessories
5 year parts only. Includes bathroo s accessories, shower accessories (e.g. hoses, handsets and
poles), wastes, WC levers and light pulls.
10 year
10 year 10 year
10 year - Shower enclosures, Shower Trays, Sanitary Ware & Furniture
Shower enclosures, Shower Trays, Sanitary Ware & FurnitureShower enclosures, Shower Trays, Sanitary Ware & Furniture
Shower enclosures, Shower Trays, Sanitary Ware & Furniture
10 year parts (subject to registration), else 2 years with proof of purchase. 1 year labour (subject
to registration), else 1 year with proof of purchase.
This guarantee applies to products purchased within the United Kingdo or Republic of Ireland, but does not apply
to products used co ercially.
The guarantee is only available to original purchasers who have proof of purchase.
The installation ust allow ready access to all products for the purpose of inspection, aintenance or
replace ent.
Any part found to be defective during the above guarantee period will be replaced without charge, providing that the
product has been installed in accordance with the instructions, used as intended, and regularly serviced.
Servicing should be carried out at regular intervals of no ore than 12 onths and ore frequently in hard water
areas (heavy li e scale) areas.
In the unlikely event that any proble s are encountered with the product’s perfor ance on installation, you ust
obtain guidance/authorisation fro our Custo er Service Depart ent, and be able to supply proof and date of
purchase, before any re edial action is taken.
The guarantee excludes general wear and tear and da age caused by accident, isuse or neglect, and does not
cover the following:
Co ponents that are subject to general wear and tear such as filters, seals, ‘O’ rings and washers etc.
· Da age caused by faulty installation
· Da age caused by li e scale or any waterborne debris
· Da age caused by inappropriate cleaning products (see user instructions)
· Da age caused by the use of non-Bristan parts
· The product being used for a purpose other than intended by the anufacturer.
In the interests of continuous product i prove ent Bristan reserves the right to alter specification as necessary.

This booklet covers product codes
W BATH08 C – Chrome
W BATH08 G - Gold
Helpline
HelplineHelpline
Helpline
0844 701 6273
0844 701 62730844 701 6273
0844 701 6273
Bristan Group Limited
Birch Coppice Business Park, Dordon, Tamworth, Staffordshire B78 1SG
A Masco Company
Website: www.bristan.com
Telephone: [phone] Facsimile: 0844 701 6275
mail: enqu[email protected]
FI TRAD XP WAST ) R V. D2