Broadfeet DCNI-523-32S User manual

Broadfeet Motorsport Equipment WWW.BROADFEET.COM Installation Instruction
Part Identification Number: DCNI-523-32S
Hardware Included:
Attention:
Please read this installation menu before installing this part. Protect your car properly in case
there is any scratch might have.
You may need to periodically to re-tighten all hardware for safety use after installation.
Installation pictures are only for your reference, there might be some differences between
pictures and real parts but no affect for your fitting.
INSTALLATION PICTURES
No.
NAME
QTY
REMARK
No.
NAME
QTY
REMARK
①
Nudge Bar
1
⑨
Hexagon Bolt
4
M12x35
②
Bracket(left)
1
⑩
Hexagon Bolt
2
M12x40
③
Bracket(right)
1
⑪
Large Washer
12
φ12x30x3.0
④
T Bolt
2
M8x30
⑫
Spring Washer
6
φ12
⑤
Plastic Fixture
2
Φ8
⑬
Hexagon Nut
6
M12
⑥
Large Washer
2
φ8x25x2.0
⑭
Extra Large Washer
2
φ14x50x4.0
⑦
Spring Washer
2
φ8
⑮
PVC Fixture
2
Φ12
⑧
Hexagon Nut
2
M8
Installation Instruction
2015-2017 Nissan Murano
SS 2.5' A-Bar / Nudge Bar

Broadfeet Motorsport Equipment WWW.BROADFEET.COM Installation Instruction
INSTALLATION PROCEDURES
Step 1: Refer to Part List to check if all hard ware are included.
Step 2: Refer to the following picture to install left and right bracket.
Step 3: Install the nudge bar on the brackets and then adjust them to the proper positions.
Step 4: Check if all hard ware are installed and then fasten all to complete the installation.
Disclaimer: Caused due to improper installation initiates some related problem and losses, are beyond our
company’s quality assurance.