Broadfeet SBNI-542-71S User manual

Broadfeet Motorsport Equipment WWW.BROADFEET.COM Installation Instruction
Installation Instruction
Part Identification Number: SBNI-542-71S
Hardware Included:
Attention:
Please read this installation menu before installing this part. Protect your car properly in case
there is any scratch might have.
You may need to periodically to re-tighten all hardware for safety use after installation.
Installation pictures are only for your reference, there might be some differences between
pictures and real parts but no affect for your fitting.
INSTALLATION PICTURE
NO.
NAME
QTY
REMARK
NO.
NAME
QTY
REMARK
①
Side Bar
2
⑩
Hexagon Head Bolt
2
M8*25
②
Front Bracket
2
⑪
Spring Washer
2
φ8
③
Rear Bracket
2
⑫
Large Washer
2
φ8*20*2.0
④
Connector
2
⑫
Hexagon Nut
2
M8
⑤
T Bolt 14-1
2
⑭
Hexagon Head Bolt
2
M10*35
⑥
PVC Fixture
4
φ12 δ0.7*35*35
⑮
Spring Washer
10
φ10
⑦
Large Washer
4
φ12*35*3.0
⑯
Large Washer
10
φ10*30*2.5
⑧
Spring Washer
4
φ12
17
Hexagon Head Bolt
8
M10*30
⑨
Hexagon Nut
4
M12
Note: It is the same way to install the both sides.
2014-2017 Nissan Rogue - 3“ Side Bar/Nerf Bar

Broadfeet Motorsport Equipment WWW.BROADFEET.COM Installation Instruction
INSTALLATION PROCEDURES
Step 1: Refer to the Part List to check if all the hardware are included.
Step 2: Refer to the following picture to install the front and rear brackets.
Step 4: Check if all hardware are installed and fasten all.
Disclaimer: Caused due to improper installation initiates or some related problem and losses, are beyond our
company’s quality assurance.