Broadfeet RDJP-343-55-40S User manual

Broadfeet Motorsport Equipment WWW.BROADFEET.COM Installation Instruction
Part Identification Number: RDJP-343-55-40S
Hardware Included:
Attention:
Please read this installation menu before installing this part. Protect your car properly in case
there is any scratch might have.
You may need to periodically to re-tighten all hardware for safety use after installation.
Installation pictures are only for your reference, there might be some differences between
pictures and real parts but no affect for your fitting.
INSTALLATION PICTURES
NO.
NAME
QTY
REMARK
NO.
NAME
QTY
REMARK
①
Rear Guard
1
⑥
Hexagon Bolt
4
M12*35
②
Bracket
2
⑦
Large Washer
14
φ12*30*3.0
③
Small Tube
2
⑧
Spring Washer
8
φ12
④
T Bolt 6-3
2
67*M12*40
⑨
Hexagon Nut
8
M12
⑤
Hexagon Bolt
2
M12*130*40-4.8（half thread）
Installation Instruction
2014-2017 Jeep Cherokee
Double Layer Rear Guard

Broadfeet Motorsport Equipment WWW.BROADFEET.COM Installation Instruction
INSTALLATION PROCEDURES
Step 1: Refer to Part List to check if all hardware are included.
Step 2: Refer to the following Picture to install the left and right bracket.
Step 3: Install the Rear Guard on the brackets and then adjust them to the proper positions.
Step 4: Check if all hardware are installed and then tighten all to complete the installation.
Disclaimer: Caused due to improper installation initiates some related problem and losses, are beyond our
company’s quality assurance.