Broadfeet RSLX-385-68S User manual

Broadfeet Motorsport Equipment WWW.BROADFEET.COM Installation Instruction
Part Identification Number: RSLX-385-68S
Hardware Included:
Attention:
Please read this installation menu before installing this part. Protect your car properly in case
there is any scratch might have.
You may need to periodically to re-tighten all hardware for safety use after installation.
Installation pictures are only for your reference, there might be some differences between
pictures and real parts but no affect for your fitting.
INSTALLATION PICTURES
NO.
NAME
QTY
REMARK
NO.
NAME
QTY
REMARK
①
Rear Guard
1
⑧
Hexagon Nut
1
Φ08
②
Bracket（right）
1
⑨
Hexagon Bolt
1
M12x1.25x35
③
Bracket（left）
1
⑩
Hexagon Bolt
4
M12x35
④
T Bolt 2-1
1
⑪
Large Washer
9
Φ12x30x3.0
⑤
PVC Fixture
1
Φ8X35X35
⑫
Spring Washer
5
Φ12
⑥
Large Washer
1
Φ08x25x2.0
⑬
Hexagon Nut
4
M12
⑦
Spring Washer
1
Φ08
Installation Instruction
2015-2017 Lexus NX 200T/ NX 300H
Rear Single Bumper Guard Pintle Style

Broadfeet Motorsport Equipment WWW.BROADFEET.COM Installation Instruction
INSTALLATION PROCEDURES
Step 1: Refer to the Part List to check if all hardware are included.
Step 2: Refer to the following picture to install the brackets.
Step 3: Install the rear guard on the brackets and then adjust them to the proper positions.
Step 4: Check if all hardware are installed and then tighten all to complete the installation.
Disclaimer: Caused due to improper installation initiates some related problem and losses, are beyond our
company’s quality assurance.
Factory
hardware
Φ12x1.25x35 Hexagon Bolt
Φ12x30x3.0 Large Washer
Φ12 Spring Washer
T Bolt
Φ08x25x2.0 Large Washer
Φ08 Spring Washer
Φ08 Hexagon Nut
M12x35 Hexagon Bolt
Φ12x30x3.0 Large
Washer
Φ12 Spring Washer
M12 Hexagon Nut
Pic 2
Pic 1