Broadfeet DWHY-306-33 User manual

Page 1 of 3
Bull Bar
Part Number: DWHY-306-33
FITS: 2016+ Hyundai Tucson
PART LIST:
QTY
PART DESCRIPTION
QTY
PART DESCRIPTION
1
Bull Bar
2
M10 FLAT WASHERS
2
Mounting Bracket1
2
M10 LOCK WASHERS
1
LEFT Mounting Bracket2
2
M10 HEX NUT
1
RIGHT Mounting Bracket2
2
M8X35 ‘T’type bolts
6
M12X30 HEX HEAD BOLTS
2
M8 FLAT WASHERS
12
M12 FLAT WASHERS
2
M8 LOCK WASHERS
6
M12 LOCK WASHERS
2
M8 HEX NUT
6
M12 HEX NUT
2
M12 Rubber gasket
2
M10X35 ‘T’type bolts
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION
Install Time: 30 –60 Minutes; Professional Installation
LEFT Mounting Bracket 2
RIGHT Mounting Bracket 2
LEFT Mounting Bracket 1

Page 2 of 3
INSTALLATION PROCEDURE
1. Pls prepare the tools for installation,follow as: 12-14、17-19 wrench.
2. Put the mount bracket into the girder of the car,and tighten it withM12X30 hex
bolts,M10X35 ‘T’type bolts andM8X35 ‘T’type bolts
3. Install the Rear Guard on the mount bracket ,and tighten it with lt M12*30 Hex bolt
4. Installation is finished.
Do periodic inspections to the installation to ensure all hardware is secure and tight.
M10X35 ‘T’type bolts
M10 FLAT WASHERS
M10 LOCK WASHERS
M10 HEX NUT
M12 Rubber gasket
M12X30 HEX HEAD BOLTS
M12 FLAT WASHERS
M12 LOCK WASHERS
M12 HEX NUT
Mounting
Bracket1
M8X35 ‘T’type bolts
M8 FLAT WASHERS
M8 LOCK WASHERS
M8 HEX NUT

Page 3 of 3
M12X30 HEX HEAD BOLTS
M12 FLAT WASHERS
M12 LOCK WASHERS
M12 HEX NUT
Bull Bar
M10X35 ‘T’type bolts
M10 FLAT WASHERS
M10 LOCK WASHERS
M10 HEX NUT
M12 Rubber gasket
M8X35 ‘T’type bolts
M8 FLAT WASHERS
M8 LOCK WASHERS
M8 HEX NUT
M12X30 HEX HEAD BOLTS
M12 FLAT WASHERS
M12 LOCK WASHERS
M12 HEX NUT