BROSA Felis Table Lamp User manual

ASSEMBLY GUIDE
Felis Table Lamp
v1.0

Components
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit www.brosa.com.au/pages/product-return-and-parts-request
and we’ll sort it out right away.
Pole x 1
Base x 1
Top Socket x 1 Shade x 1
What you need
1
2
4
3

Safety
1. For indoor use only
2. Follow instructions carefully. Any deviations may be hazardous, or void
your warranty.
3. Damaged power cords must be replaced by a professional.
4. Never use a bulb of a greater wattage than recommended.
5. To replace the bulb, unplug the lamp from its power source and allow it to
6. Periodically check and re-tighten all screws and fasteners.
8. Firmly secure all pieces. Small parts may present a choking hazard.
9. Bulb is not included.
MAX 40W E27
220-240v ~ 50Hz

Step 1 Align the pole (1) with the base (2) and rmly screw
them together.
1
2
Step 2 Place the shade (3) on top of the pole. Carefully adjust
the shade and tighten it in place with the top socket
(4). Gently screw the correct bulb (not included) into
the bulb socket.
4
3

Step 3 Check if all parts are secure.
Enjoy! We hope your new lamp lights up your life.