burmeier Dali User manual

Dali
Clinic | Care | Homecare | Living
REF: 221234 2019-01-21 | Version 01 | 272846
Instruction Manual
Part A: General Information
Part B: Operator and Technical Personnel
Part C: Care staff and residents
Information for clients
In addition to these Operating
Instructions, further product
information is available:
•"Lock-APP" application:
Can be downloaded from the
App and Play Store

Part A: General Information

[1] Chassis footboard [2] Safety side release buttons (4)
[3] Lower leg rest [4] Thigh rest
[5] Handset [6] Triangular grab handle
[7] Backrest [8] Patient lifting pole
[9] Chassis headboard [10] Mattress retainers (4)
[11] Guide rails (4) [12] Lifting pole sleeves (2)
[13] Castors (4) [14] Control unit (concealed in picture)
[15] Drive motors for backrest and
thigh rest (concealed in picture)
[16] Safety side bars
[17] Mattress base frame [18] Brake pedal lever
In this instruction manual, numbers or letters which appear in square brackets [ ] and bold type
refer to the care bed’s operating devices as shown in this illustration.

1
2
3
3.1
3.2
4
4.1
4.2
4.3
4.3.1
4.3.2
4.3.3
4.4
4.5
4.5.1
4.5.2
4.5.3
4.5.4
4.5.5
4.5.6
4.5.7
4.5.8
4.5.9
4.5.10
4.5.11
Contents
Part A: General Information
Address, information for customers, market note...................................................... 1
Foreword......................................................................................................................... 2
Conventions of this Instruction Manual....................................................................... 3
Safety Information............................................................................................................................ 3
Icon Information............................................................................................................................... 4
Product Description....................................................................................................... 5
Intended Use..................................................................................................................................... 5
Contraindications............................................................................................................................. 6
Components of the Bed................................................................................................................... 7
Mattress Base Frame...........................................................................................................7
Safety Side (Click-In)............................................................................................................7
Electrical Adjustment System...............................................................................................8
Mattress Base Sizes......................................................................................................................... 8
Technical Data...................................................................................................................................9
Type Plate............................................................................................................................ 9
PID Number..........................................................................................................................9
Explanation of the Graphical Symbols Used......................................................................10
Materials Used....................................................................................................................11
Dimensions and Weights....................................................................................................11
Adjustment Options............................................................................................................12
Ambient Conditions............................................................................................................ 12
Electrical Data: Dali standard, low-entry............................................................................ 14
Electrical Data: Dali econ, low............................................................................................16
Electrical Data: Dali wash...................................................................................................17
Information on Electromagnetic Compatibility (EMC).........................................................19
I

II

1 Address, information for customers,
market note
Manufacturer
Burmeier GmbH & Co. KG
(A Stiegelmeyer Group company)
Pivitsheider Straße 270 • D-32791 Lage/Lippe, Germany
Tel.: [phone] • Fax: [phone] - 41
Email:[e-mail]
Internet: www.burmeier.de
Service Centre
To order replacement parts in Germany and for any servicing requirements or other ques-
tions, please contact our service centre:
Burmeier GmbH & Co. KG
(A Stiegelmeyer Group company)
Pivitsheider Straße 270 • D-32791 Lage/Lippe, Germany
Tel.: [phone]
Fax: [phone] - 41
Email: [e-mail]
Information for clients
In addition to these Operating Instructions, further product information is available:
•"Lock-APP" application:Can be downloaded from the App and Play Store.
•“Burmeier” application:Can be downloaded from the App and Play Store.
•Quick Guide:To operate the bed functions that are used most, can be downloaded
from www.burmeier.de
Market note
Customers outside Germany may contact our distribution companies in their respective
country if they have any questions. Contact details can be found on our website.
This product is not licensed for use on the North American market. This applies particularly to
the United States of America. The distribution and use of the care bed in these markets, in-
cluding through third parties, is prohibited by the manufacturer.
Part A: General Information 1

2 Foreword
Dear Customer,
Burmeier has built this bed to give you the best possible help with the challenges posed by
caregiving in the home. We passionately pursue the goal of developing high-quality durable
products. Our products should make residents feel as safe and comfortable as possible dur-
ing their stay in bed and also lighten the workload of care staff and relatives. For this reason,
all functions and electrical safety are tested prior to delivery. Each bed leaves our factory in
perfect condition.
Correct operation and care are necessary to keep the bed in excellent condition during long-
term use. Please therefore read and observe these instructions carefully. They will help you
to put the bed into service for the first time and to use it on a daily basis. This instruction
manual contains all the information you will need to make it as easy and safe as possible to
control and handle this bed, both for you as the operator and your users. It is a practical ref-
erence book and should be kept close to hand at all times.
The medical retail trade that delivered this bed is also there to assist you with any questions
you may have concerning servicing and repairs during the product’s lifetime of use.
This bed is designed to give the person in need of care and all users a safe and practical
piece of equipment that provides decisive support with the ever-increasing requirements of
care-giving.
Thank you for the confidence you have place in us and our products.
Burmeier GmbH & Co. KG
You are a medical product retailer and would like to get in touch with Burmeier? Feel free to
phone us: Our customer care centre in Germany can be contacted at [phone] - 0.
Retailers outside Germany can contact our sales distributors in their particular country if they
have any questions. For more information visit:
www.burmeier.com
2 Part A: General Information

3
3.1
WARNING
CAUTION
ATTENTION
Conventions of this Instruction Man-
ual
Safety Information
At the time of delivery, the Dali care bed represents state-of-the-art technology and has been
tested by an independent testing institute.
Only use the Dali care bed if it is in perfect working order.
Explanation of the Safety Symbols Used
In this instruction manual, safety information is displayed in the following way:
WARNING
•WARNING indicates a potentially hazardous situation that, if not avoided, could result in
death or serious injury.
CAUTION
•CAUTION indicates a potentially hazardous situation that, if not avoided, could result in
minor or moderate injury.
ATTENTION
•NOTICE indicates a harmful situation that could result in damage to the product or some-
thing around it.
The safety symbols used are not a substitute for the written safety information. It is important
therefore to read the safety information and follow the instructions exactly!
Part A: General Information 3

3.2 Icon Information
General information and cross-references will be displayed in the following way:
General information, tips and helpful courses of action.
Cross-reference or active link: Indicates the chapter name and page number of the instruc-
tion manual where you will find what you are looking for. Example: Part B: Safety Informa-
tion »3
Conventions of this Instruction Manual
4 Part A: General Information

4
4.1
Product Description
Intended Use
•The Dali care bed, hereafter referred to as the bed, is a comfortable solution for posi-
tioning and facilitating the care of frail persons in need of care in homes for the elderly
or care homes. Furthermore, it was developed as a supporting solution for home care,
for infirm, disabled or frail persons. It it designed to support this care.
•The use of the Dali care bed in hospitals is only permitted in rooms designed for medi-
cal treatment of the application group 0.
•Further details on the permissible use environment are given in the chapter Part A: Am-
bient Conditions »12. Further information on possible electromagnetic influences is
given in the chapter Part A: Information on Electromagnetic Compatibility (EMC) »19.
•This bed may be intended for care under supervision of a doctor and serve for diagno-
sis, treatment or observation of the resident. It is therefore equipped with the option to
lock the electrical adjustment facilities.
•This bed has no special connectors for potential equalisation. Please pay attention to
this before connecting additional mains-operated (medical) electrical equipment.
If necessary, further advice on additional protective measures can be found:
⁃In the instruction manuals of these additional mains-operated electrical devices
(e.g. compressed air positioning systems, infusion pumps, enteral feeding devi-
ces, etc.)
⁃In the current EN 60601-1 standard (Safety of Medical Electrical Systems)
⁃In the current issue of the VDE 0107 standard (High-voltage Installations in Hos-
pitals)
•This bed may be operated without restrictions with a permanent maximum load of 185
kg (resident and accessories (exception Dali Low Entry with up to 175 kg)).
•The permitted weight of the resident depends on the total weight of accessories attach-
ed at any time (e.g. respirators, infusions,…)
Weight of accessories
(incl. mattress)
Maximum permitted resident weight
Dali (standard, low, econ, wash) Dali low-entry
10 kg 175 kg 165 kg
Part A: General Information 5

→
→
ATTENTION
4.2
→
→
→
Weight of accessories
(incl. mattress)
Maximum permitted resident weight
Dali (standard, low, econ, wash) Dali low-entry
20 kg 165 kg 155 kg
•Please refer to the safety information provided in the chapter Part B: Safety Informa-
tion »3, especially in the case of residents in poor clinical condition.
•This bed may be operated only by persons who have received instruction in its safe op-
eration.
•This bed is suitable for multiple use. When re-using the bed, pay attention to the neces-
sary requirements:
See chapter Part B: Cleaning and Disinfection »24
See chapter Part B: Maintenance »29
•The bed may be moved within the room even when the resident is lying in bed. Initially
adjust the mattress base to a flat home position at its lowest level.
This bed may only be used under the operating conditions described in this instruction man-
ual. This bed must not be modified. Any other use shall be regarded as contrary to the inten-
ded purpose!
•This product is not licensed for use on the North American market. This applies particular-
ly to the United States of America (USA). The distribution and use of the care bed in these
markets, including through third parties, is prohibited by the manufacturer.
Contraindications
This bed is only suitable for residents who do not fall below the following minimum body size/
weight:
Height: 146 cm
Weight: 40 kg
Body mass index ‘BMI’: 17
Product Description
6 Part A: General Information

CAUTION
4.3
4.3.1
4.3.2
BMI calculation:
BMI = weight of resident (kg) / height of resident (m)2
Example a:
41 kg / (1.5 m x 1.5 m) = 18.2 = OK!
Example b:
35 kg / (1.5 m x 1.5 m) = 15.6 = Not OK!
Trapping hazard
•Owing to the smaller limbs of residents with a body height/weight that is less than this,
there is an increased risk of entrapment between the open spaces of the safety sides
when safety side systems are used.
Components of the Bed
The bed is delivered unassembled and mounted on a storage aid. It can also be transported
easily within blocks of flats. It comprises two chassis (a head and footboard); a mattress
base frame divided in the centre; four safety side bars and a lifting pole with a grab handle.
The bed stands on four steerable castors which are all fitted with a locking brake.
Mattress Base Frame
The mattress base frame is divided into four sections with a backrest, a fixed middle section,
a thigh rest and a lower leg rest. The backrest and thigh rest can all be adjusted with the aid
of electric motors. The mattress base height can be adjusted horizontally to a high position or
to a reverse-Trendelenburg position. All adjustments are activated with a handset.
Safety Side (Click-In)
The bed has click-in safety side bars on both sides of the bed that are raised to present a
barrier, or lowered, if they are not required. Safety sides protect the resident from accidental-
ly falling out of bed. The click-in safety side excels through its easy installation and user-
friendly operation. It is available in a wood or metal design depending on the characteristics
of the bed.
Product Description
Part A: General Information 7

4.3.3
4.4
Electrical Adjustment System
The electrical adjustment system on this bed is first-error safe, flame-retardant (to V0) and in
the Dali standard, wash and low-entry consists of:
•An ‘external’ power pack.
The power pack consists of: Voltage transformer and low-voltage connection cable and
can be used as instruments to separate the bed from the power supply system.
The voltage transformer generates a protective low voltage that is safe for both the res-
ident and care staff.
The power supply unit provides all drives (motors) with protective low voltage using a
connection cable. The socket available is protected against the ingress of water.
•a central control unit. All drive motors and the handset (Bluetooth handset) are cou-
pled/connected to the central control unit:
•a Bluetooth handset with a sturdy hook (coupled/connected to the control unit via a
Bluetooth interface or a plug connection depending on the drive system).
Care staff can lock the adjustment options on the handset when necessary due to the
poor clinical condition of the resident.
•two drive motors for horizontal height adjustment.
•a drive motor for the thigh rest.
•a drive motor for the backrest.
and in the Dali econ and low consists of:
•a central control unit. All drive motors and the cable handset are connected to the cen-
tral control unit;
•a mains cable: a spiral cable with EPR sheathing and country-specific plug. These
plugs can be used as instruments to separate the bed from the power supply system.
The mains cable is interchangeable by maintenance personnel.
•a cable handset with sturdy hook connected to the control unit via plug connection.
Care staff can lock the adjustment options on the handset when necessary due to the
poor clinical condition of the resident.
•two drive motors for horizontal height adjustment.
•a drive motor for the thigh rest.
•a drive motor for the backrest.
Mattress Base Sizes
The Dali care bed can be ordered in the following sizes.
This instruction manual may describe functions or features that your model of bed does not
have.
Product Description
8 Part A: General Information

4.5
4.5.1
4.5.2
Mattress base dimensions (W x L) Outer dimensions (W x L)
90 x 200 cm (wood or metal mattress base) 101 x 218 cm
Technical Data
Type Plate
You can find the type plate on the bed frame at the head end. The type plate contains the
following information:
Part A: Image1: Type plate examples
The exact technical data can be found on the type plate on your bed.
Explanation of symbols for the exact identification of the bed:
Icon Meaning
Model Bed model
Order number
Item number
Date of manufacture (week/year)
PID Number
Relevant order information is summarised for the manufacturer under the PID number. Have
the PID number ready any time you contact your specialist dealer. You can find the PID no.
on the bed frame at the head end.
Product Description
Part A: General Information 9

4.5.3
Part A: Image2: PID Number
Explanation of the Graphical Symbols Used
Explanation of the graphical symbols used:
Device with type BF applied part in accordance
with IEC 601-1 (special protection against elec-
tric shock)
Protection Class II device, shock-proof
Only for use in enclosed spaces - do not use
outdoors
Dispose of electrical components in accordance
with the WEEE Directive. Do not dispose of as
household waste!
Caution! Follow the operating instructions
Protection of electrical equipment from splash
water from all sides
Conformity mark in accordance with the Medical
Devices Directive 93/42 EEC
Product Description
10 Part A: General Information

4.5.4
4.5.5
Explanation of the graphical symbols used:
Safe working load
Maximum permitted weight of resident
Minimum measurements/weight of resident:
Height: 146 cm, weight: 40 kg; body mass index
“BMI”: 17
Only use mattresses that are approved by the
manufacturer.
Lock the handset if the resident could be at risk
due to inadvertent motorised adjustments
Materials Used
The bed is made predominantly of steel sections coated with a polyester powder finish or a
metal alloy of zinc or chromium. The safety side bars and mattress base are made of wood
or metal depending on the bed model. The chassis are made of steel profiles with wooden
panels. All surfaces are sealed.
The surfaces indicated are safe for contact with the skin.
Dimensions and Weights
All indications of dimensions and weights in this manual are approximate.
standard/econ wash low/low-entry
Assembled bed with safety sides:
Mattress base dimen-
sions
Part A: Mattress Base Sizes »8
Product Description
Part A: General Information 11

4.5.6
4.5.7
standard/econ wash low/low-entry
Total weight, depending
on model
92 to 97 kg
Safe working load 185 kg 185 kg 175 kg
Disassembled bed:
Chassis with motors 34 kg
Wooden mattress base
frame with motors
37 kg - 37 kg
Metal mattress base
frame with motors
41 kg
4 wooden safety side
bars
13 kg
4 metal safety side bars 17.5 kg
Patient lifting pole 5 kg
Storage aid 3 kg
Adjustment Options
Bed model
standard, econ, wash low low-entry
Mattress base height
adjustment
approx. 40 – 80 cm approx. 32 - 72 cm approx. 23 – 63
Adjusting the backrest approx. 0° to 70°
Adjusting the leg rest approx. 0° to 35°
Ambient Conditions
Noise level during adjustments max. 48 dB(A)
The ambient conditions stated below must be maintained:
For storage/transport:
Product Description
12 Part A: General Information

Storage temperature min. -10°C max.+ 50°C
Relative humidity
(at 30°C; non-condensing. At
altitude ≤ 2000 m)
min. 20% max. 90%
Air pressure min. 800 hPa max. 1060 hPa
In operation:
Ambient temperature min. + 5°C max. + 40°C
Relative humidity
(at 30°C; non-condensing. At
altitude ≤ 2000 m)
min. 20% max. 90%
Air pressure min. 800 hPa max. 1060 hPa
For use in the following application groups according to DIN EN 60601-2-52:
3: Long-term care in a medical facility in which medical supervision is
required and monitoring is provided if required. A medical electrical
device used in medical procedures can be provided to help main-
tain or improve the condition of the resident. (e.g. retirement and
nursing homes, rehabilitation facilities and geriatric institutions)
4: Care in the home. A medical electrical device is used to alleviate or
compensate for injuries, disabilities or illnesses.
Product Description
Part A: General Information 13

4.5.8 Electrical Data: Dali standard, low-entry
Control unit
Type: CBSTI 01
Operating voltage From external power supply type SMPS 12 or SMPS14
Output current 8 A
Duty cycle Intermittent duty: 2 min ON / 18 min OFF
Protection category IPX6
Classification 2
Transmitter properties (applies to: CBSTI01 control unit and HBSTI Bluetooth hand-
set))
Frequency band of transmission 2400 MHz - 2485 MHz
Type BLUETOOTH Low Energy BLE 4.2
Modulation GFSK
Maximum effective radiated power (ERP) 10 dBm
Power pack
Type
SMPS12 SMPS14
Input voltage 230 VAC (-15% / +10%) 100-240 VAC, 50/60 Hz -15% /
+10%
Standby current consumption < 0.5 W
Current input 1.8 A max. 3.5 A max.
Output voltage 32 VDC 24 VDC
Output current 4.5 A 6 A
Duty cycle Intermittent duty: 2 min ON / 18 min OFF
Protection category IPX4 IPX6
Classification Protection class 2
Product Description
14 Part A: General Information