BURY CV 9040 User manual

BURY GmbH & Co. KG
Robert-Koch-Straße 1-7
D-32584 Löhne
Hotline Tel: +49 (0)180 - 584 24 68*
Hotline Fax: +49 (0)180 - 584 23 29*
E-mail: [e-mail]
* € 0.14 min. from a Deutsche Telekom AG landlin
MOBILE Bluetooth®HANDS-FREE CAR KIT
WITH DIALOGPLUS VOICE CONTROL AND TOUCHSCREEN
www.bury.com
59-0815-0-00-180708
READY FOR
CONVERSATION
EVERYWHERE!
CV 9040

Index
Introductory information 2
1. General 2
2. Security guidelines 2
Installation of the hands-free car kit 4
3. Scope of delivery CV 9040 4
4. Instructions on battery 5
5. Positioning and mounting 6
6. The correct way to use the display 9
Operating guidelines 10
7. Initial operation of the hands free set 10
8. Establishing a Bluetooth® connection 10
9. Handling possibilities 11
10. The display 11
11a. Accepting, making, ending calls 12
11b. Transferring Calls 13
11c. Conference Mode 14
12. Voice Dial 15
13. Voice dial commands 16
14. Head menu 16
15. Dial number 17
16. Phonebook 18
17. Redial 20
18. Call list 20
19. Messages 20
20. Dial Joe Bloggs 20
21. Settings 21
21.1 Bluetooth® 21
21.2 Voice Dial 21
21.3 Audio 22
21.4 Display 23
21.5 Device 24
22. Handling via Touch screen 24
Further Information 25
23. Service 25
CV 9040

2Introductory information
1. General
Dear customer,
Congratulation on purchasing a BURY hands-free car kit. You have cho-
sen a high quality product that is extremely easy to use. All aspects of
BURY production through to sales and service are subject to strict qua-
lity management according to DIN EN ISO 9001. All BURY hands-free
car kits meet CE and e1 security standards. Furthermore, we provide a
two-year warranty on all components.
Please read the operating manual carefully so that you can fully enjoy
your BURY hands-free car kit. If you have any further questions concer-
ning installation or operation of your car kit, please contact your dealer.
He will be happy to give you reliable advice. You can also contact our
hotline. Our phone and fax numbers are listed in the chapter Service at
the end of the operating instructions.
Have a good trip!
2. Security guidelines
Installation – who and where
The installation of this system can be carried out by yourself but please
observe the installation requirements of the automotive manufacturer
(VAS 1978). During the installation, park the car at a place where the
road traffic is not impaired. We recommend to let a specialised work-
shop perform the installation.
Power Supply
This hands-free car kit is designed for use in vehicles independent of
the available power supply, whether 12 or 24 volts. The system‘s batte-
ry can, however, be charged from both power networks via the cigaret-
te lighter plug (car and HGV). The supply voltage is appropriately ad-
justed.
Exclusion of Liability:
Please comply with the laws and regulations concerning the e-certifica-
tion and the use and installation of electronic systems in vehicles which
are particular to your country. If you do not know these, please inform
yourself of them appropriately. Only charge the battery of the hands-
free car kit using the car cigarette lighter plug and when the vehicle is
stationary. Please do not hesitate to call our hotline if you have any
questions concerning these matters.

3
Position, volume
Install the components of the device in the vehicle so that your field of
vision is not impaired and the components are not mounted in the im-
pact zone of the passenger compartment or in the airbag inflation zo-
nes. The removal of coverings (with and without airbags) or compon-
ents of the dashboard requires – in some cases – special tools and
special knowledge.
Intended use
We shall not be liable for damages or malfunctions due to improper use
of the hands-free car kit system. Therefore, do not expose the device
to moisture, extreme temperatures or shocks and carefully follow the
procedure described in the installation and operating guidelines.
Use while driving
Operate the system only when the situation allows it and when you do
not endanger, harm, constrain, or annoy other road users. The volume
of the device has to be set in a way that exterior noise is still audible.
Faults
Do not commission the device if you detect or assume a defect. In this
case, contact a BURY specialised dealer or our hotline. Improper repair
efforts can be dangerous for you. Therefore, only skilled personnel may
perform inspections.
Important:
The driver is ultimately responsible for the safe operation
and control of their vehicle at all times. You should never
use a hand held phone, including sending or reading text or
picture messages, while driving.
Research indicates that there is a risk to safety when the
driver of a motor vehicle is distracted and using a mobile
phone while driving can be a distriction.
The manufacturer strongly recommends that you use a
hands-free solution when driving.




4
3. Scope of delivery CV 9040
Installation of the hands-free car kit
1 Hang-up cup
2 Display
3 Sun visor clip
4 Attachment clip
5 Cleaning cloth and adhesive pads
6 Car power supply cable
7 Storage bag
8 Microphone

5
The hands-free car kit has an integrated rechargeable battery which
remains activated for approx. 50 hours when fully loaded. The battery
guarantees up to 3 hours of hands-free talking without the need for
recharging. These values may differ depending on the settings and the
use of the hands-free car kit.
The battery can be charged in your vehicle using the 12V/24V cable. A
100-240V power cord is also available as an accessory - so that you are
also able to charge up the battery via a mains connection at home, or
in your hotel room for instance. The instructions below refer to both of
these options throughout.
Please avoid charging the battery inside the vehicle in direct sunlight
and the high interior temperatures which can rapidly be reached in
parked vehicles. In such cases, please remove the hands-free car kit
from the cradle and place it either in the door glove pocket or the glove
box.
Please comply with the following temperature levels:
- Storage between -20 and +45 degrees Celsius
- Charging between 0 and +45 degrees Celsius
- Use between -10 and +60 degrees Celsius
If you do not comply with these temperature levels then the battery
can get damaged and the it is possible that the hands-free kit will fail to
work.
To fully charge the battery for the first time you should connect plug it
into a source of electricity for approx. 6 hours without interruption.
You connect the charging cable to the socket on the case. During the
charging procedure the status display illuminates in red, with a comple-
tely charged battery, green. You also receive a message telling you that
the battery is charged.
The charging status of the battery is displayed to you in the upper right
hand section of the display. When it is fully charged, the battery symbol
is full, otherwise it is empty.
If the battery capacity is getting low, the symbol flashes more and
more quickly and you receive a corresponding reminder on the dis-
play.
Please note:
Only carry out a system update with the power supply
unit connected.

4. Instructions on battery

6Installation of the hands-free car kit
You have two options for mounting the hands-free car kit in your car.
1. Mounting on the sun visor
Illustration 1 Illustration 2
Illustration 3
b) Connect the mounting clip with hang-up cup (see illustrations 5,6).
Illustration 5 Illustration 6
Illustration 4
5. Positioning and mounting
a) Connect the mounting clip with the sun visor clip see illustrations 1-4).

7
c) Place the display in the hang-up cup so that you hear it audibly snap
into place (see illustrations 7-8).
Illustration 7 Illustration 8
Please note:
When positioning it, ensure that the hands-fee car kit
doesn’t impair your view and that it is not mounted in per-
sonal impact zones (e.g. in the airbag area).
If you do not use the CV 9040 on the sun visor then ple-
ase use the external microphone. This guarantees optimum
voice quality irrespective of the other attachment positions
of the hands-free car kit. You connect the microphone to the
hang-up cup using the phone jack.


d) Now attach the hands-free car kit to the sun visor (see examples
1,2).
Exp. 1 Exp. 2

8Installation of the hands-free car kit
2. Mounting on the dash board
a) Stick the enclosed pads onto the hang-up cup. (see illustrations
1 & 2).
Important:
The hang up cup can only be affixed once, damage may
occur to the adhesive surface if it is removed. It is also
possible that depending on the structure and consistency,
with strong temperature variations, the surface may deco-
lour during subsequent use.

Illustration 1 Illustration 2
b) Now select a suitable space on the dashboard, remove the protec-
tive paper from the adhesive pads (see illustration 3) and then firmly
fasten the hang-up cup to its intended place (see illustrations 4 & 5).
After this you can install the display.
Illustration 3
Illustration 5
Illustration 4

9
6. The correct way to use the display
So that you can enjoy using your hands-free car kit as long as possible,
please comply with the following advice:
1. Opening and closing the display
a) To open and close the display, please release the catch on the side
(see illustrations 1 and 2).
Illustration 3
2. Removing the display from the holder
a) To remove the display from the holder, press in both sides of the
holder (see illustration 3). Then you can remove the display easily (see
illustration 4).
Illustration 1 Illustration 2
Illustration 4
Please note:
Clean the display when required using a damp, lint free
cloth. Please do not use any liquid cleaning agents


10
7. Initial operation of the hands free set
When you open the display, the hands-free car kit is activated. You
must then activate the operating language.
If you rotate the display by 180° this is recognised by a sensor and the
content of the display is automatically adjusted.
You can change the user language by selecting the entry language. You
will find the entry under more - head menu - settings - device - langu-
age (see chapter 21.5).
8. Establishing a Bluetooth® connection
If you would like to establish a Bluetooth® connection for the first
time, you must activate the Bluetooth® function in your mobile tele-
phone and start the search for Bluetooth® devices. Search for a de-
vice with the description “CV 9040...“. If several devices have been
found, please select and connected the 9040 and enter the PIN num-
ber `1234´. Up to ten Bluetooth® devices recognitions can be stored
in the system.
Note:
If the automatic connection is activated, no other mobile
telephone can be paired. If you want to pair a new tele-
phone, the automatic connection must be deactivated by
pressing the Auto connect field (upper right).
With the operation field on the left, you have the possibility of de-
ciding between the day or night mode (also see chapter: display).
In case a mobile telephone has been connected at some time, the
recognition / names of the mobile telephones appear in the display.
These are read one after the other by the HFK. With a connection
which has successfully been made, the name of the coupled mobile
telephone and of the provider will be shown and the data from the
telephone book (SIM card) and the address book (storage of the
telephone) are transmitted to the HFK. Depending on the amount of
stored data, this can take a few seconds. If the synchronisation of
the phone book is interrupted, e.g. though an incoming call, it is
possible that all entries will not be transmitted. If this happens, the
phone book should once again be manually synchronised (see chap-
ter: device).

Startscreen with
paired telephone
Startscreen without
paired telephone
Operating guidelines

11
9. Handling possibilities
The system can be operated in two ways:
1. Operation using voice control
2. Handling via Touch screen
Touch screen
Voice dial
commands
Note:
The telephone book on your mobile phone is generally
synchronised by the hands-free car kit at regular intervals.
For the duration of this short moment, the voice control will
not be available to you and you will receive a corresponding
message.

10. The display
Dial number
Phone book
Activate Voice dial
More (functions)
Charging status of the hands-free car kit battery
Active Bluetooth® connection
Volume level display
Missed call / new SMS
Bluetooth® profile
Charging status of the mobile phone battery
Signal strength of the mobile telephone network
The ‘VOICE DIAL COMMANDS’ are highlighted
in the further explanatory notes.

12 Operating guidelines
Incoming call
Active call
11a. Accepting, making, ending calls
In order to inform the driver of an incoming call, in the display a tele-
phone symbol is shown. At the same time the name and telephone
number of the caller (if available) will be shown.
You can accept or reject the call using either the voice control (which
has to be activated beforehand, see chapter 21.5) or the touch
screen.
You will be asked whether you want to ‘accept’ or ‘reject’ the call.
The call can be accepted (pushing the green symbol) or
rejected (pushing the red symbol).
A call will be ended by pushing the red telephone symbol.
During the call, you have the possibility to regulate the volu-
me of the voice of your discussion partner through the `mi-
nus(-)´ or `plus(+)´ field.
Using this field, you access a submenu in which you are able on the one
hand to select and send DTMF tones (e.g. to check your mailbox) and
on the other to changeover into the private mode. In this mode, your
conversation will be completed via mobile phone and is no
longer audible to the other passengers in the vehicle. In addi-
tion you have the possibility to mute the microphone, e.g. for
further inquiries with a passenger.
Note:
Please comply with the country-specific laws concerning
in-car telephone calls.


13
11b. Transferring Calls
Introduction
Transferring calls is to be understood as being the acceptance
of a call during a telephone call and alternating between two
conversations.
Please note:
The functions described in chapters 11b and 11c are ex-
clusively valid for incoming calls.
Please remember that your range of functions can vary
depending on the type of mobile phone. Please find the
relevant details in the instructions manual for your mobile
phone.
If you receive another call during an active telephone conversation, you
will be informed of it via an acoustic signal. You now have the option of
either rejecting the call (the red symbol) or accepting the call (the
green symbol).
If you accept the call your previous call will be put on hold. Your con-
versational partner will be indicated with .
You now have the following options
1. Using swap you can switch between your
different callers.
2. You can reject the active Call.
3. You can reject the held call.
4. You can activate the private mode.
(also see chapter 11a)
5. You can activate the mute.
(also see chapter 11a)
6. You can activate the keypad.
(also see chapter 11a)



14 Operating guidelines
11c. Conference Mode
Introduction
The hands-free car kit provides you with the possibility of mer-
ging up to seven conversations to create a conference. This
means that all participants can talk to each other at the same
time.
If you receive a further call during an active telephone conver-
sation, you can merge both conversations into a conference.
To this end select the merge command (conference is shown
in the display).
During a conference, you have the following options
1. You can reject the active call.
(the conference ends)
2. You can activate the private mode.
(also see chapter 11a)
3. You can activate the mute.
(also see chapter 11a)
4. You can activate the keypad.
(also see chapter 11a)
If you receive a further call during a conference, you can add this to the
conference using the add to conference command or switch between
the conference and conversational partner using the swap command
(also see chapter 11b).
Please note:
The current mobile telephone networks only permit the
use of a maximum of two lines.
If you are using both lines and you receive a further call, you have the
following options:
Reject call
Accept call
 Your active connection will be ended and replaced by the
new connection.


15
12. Voice Dial
Introduction
With the help of the voice control, the telephone system can be
operated through spoken commands. This section explains the es-
sential functions which can be accessed through the voice control.
Often a desired result can be reached in several ways.
The HFK itself leads you through some of the expanded functions.
If you are not sure which commands you can use in a specific menu,
say `HELP´. Then all valid commands are then listed. The HFK has
a `user training mode´ with which it can `get used to´ accents
and dialects.
For information see chapter 21.2: Voice dial.
Some voice commands can only be called up if a mobile telephone is
connected with the HFK using Bluetooth®.
In order to activate the voice control, apply a short press
to this field on the touch screen. The system answers with
`Head menu´. Speak after the tone clearly in the direc-
tion of the microphone.
In order to deactivate the voice control, simply touch any part of the
touch screen again. The system answers with `Cancel´.
When there is a longer break, the system reacts with the question `Ple-
ase say a command now´ and asks `Pardon?´, if a command was
not correctly understood.
Eight seconds afterwards the voice dial will be deactivated and must be
started new on the touch screen.
When entering voice commands, please ensure you speak naturally,
clearly and at a regular speed.
Note:
With the use of the voice control it is recommended to
turn down the volume of components which are indepen-
dent of the audio system (e.g. a navigation system) or to
switch off the broadcast of traffic jam warnings in order to
avoid unintended voice entries.


16 Operating guidelines
13. Voice dial commands
The HFK can be operated through the following voice commands. The
voice commands are divided into different menus and some commands
are only available in certain menus.
With an active HFK, say `HELP´if you are not sure which commands
are available: the HFK will then name all possible commands.
In addition to these commands, the HFK recognises the numbers from
zero to nine. Numbers which are larger than nine must be spoken indi-
vidually (e.g. 10 = one, zero). To search in the phone book, the HFK
recognises the letters `A´ to `Z´ as well as the NATO alphabet (e.g.
alpha, bravo, charlie). For the entry of telephone numbers abroad, the
command `PLUS´ is also available.
When using voice control, in all menus these four commands are always
available.
14. Head menu
This is where you can find all of the menus (the menus TEXT MES-
SAGES and SETTINGS are not superimposed) which are required for
the operation and configuration of the system. You may choose to se-
lect these using the touch-screen or via voice control. In addition the
HFK has two purely voice commands:
`READ NEW MESSAGE´ and `DIAL JOE BLOGGS´.
You can find explanations of these in the corresponding chapters. On
the touch screen, the menus can be controlled by applying a short
press to the respective field. In the following the individual menu points
will be explained.
Cancel
Help
Back
Head menu
Breaks off the current action
Back to Head menu
One step back
Names all commands
which are available

17
15. Dial number
It makes sense to divide telephone numbers in short number blocks of
3-4 digits and to say them this way.
After the signal tone you can respectively continue your announce-
ment.
Enter the area code (wait a moment so that the HFK can repeat the
entry).
Enter the first numbers of the actual telephone number (wait a moment
so that the HFK can repeat the entry.)
Enter the remaining numbers of the actual telephone number (wait a
moment so that the HFK can repeat the entry).
At each break, the HFK repeats the number block and waits for the next
number block.
When you have entered the last number block of the telephone num-
ber, you can check the complete telephone number once again with the
voice command `PLAYBACK´.
To dial a number please use the voice dial commands
which are displayed on the screen.
Dial number
Playback
Delete group
Dial
Delete last
Delete all
The HFK repeats the entire telephone number.
The complete number will be deleted.
The last digit will be deleted.
A telephone connection is being established.
The last number block will be deleted.

18 Operating guidelines
16. Phonebook
Press and release the button for the voice control shortly and use the
voice command `PHONEBOOK´.
Since your phonebook is scanned with the first coupling of your mobile
phone with the system, it is immediately available to you and is stored
until you delete the mobile phone from the list (see chapter: Blue-
tooth®). The telephone book data can of course only be seen or chan-
ged by you.
After the first entry has automatically been read aloud, in addition to
the standard commands the following voice commands are available:
The marked entry is read aloud again.
The entire list is read aloud to you. With `STOP´ you can stop the
process and select the respective entry. With `NEXT´ or `NEXT
PAGE´ and `PREVIOUS´ or `PREVIOUS PAGE´ you can navigate in
the list.
With `DIAL
´ the telephone connection will be made. You can also
jump directly to one of the entries shown by activating the entry
number. E.g.: `SELECT ENTRY THREE´.
`Joe Bloggs´ is a placeholder for an entry from your phonebook. If you
select a name, you go directly to the respective entry.
Note:
It is important that the stated name exactly corresponds
with the recorded entry in the phonebook.
Please note that telephone book entries, which are only
shown in capital letters must be spelt out.
Depending on the type of mobile phone, it is possible that
the order of the first names and surnames may have swap-
ped around after the telephone book has been transferred.
Here you can search for entries through a letter field. Name a begin-
ning letter and with the voice command `SELECT´ all entries are
shown which begin with the respective letter.



Phonebook
Playback
Play list
Dial Joe Bloggs
Dial fast search
Select

19
Under `DETAILS´ you will find if necessary all telephone numbers
listed under this entry
Depending on the settings in the mobile telephone, you will be shown
by the HFK either the SIM card contacts or the telephone contacts or
both.
If you say `NUMBER´, all stored entries under this name will be read
aloud.
In case you have stored more than one telephone number under a
name, you can also directly call through the category.
e.g. `DIAL JOE BLOGGS HOME´.
In addition you can allocate a phonebook entry with an own voice com-
mand (voice tag). This is recommended for names which are difficult to
pronounce.
Clearly speak the command into the microphone, the HFK repeats this
and you can then make a call to the desired discussion partner from the
head menu with e.g `DIAL CUSTOMER ONE´.
In all the HFK can store 150 voice commands. This voice command
(voice tag) is valid for all numbers which are allocated to this name. A
corresponding inquiry follows about which of these numbers you want
to call.
Note:
In order to make voice recognition easier for the HFK,
please do not use voice commands for your voice com-
mands (voice tags) which are also used by the HFK.

Dial office
Dial mobile
Dial home
Dial general
Dial SIM
Voicetags
Store
Playback
Number
Details
If the SIM card contacts in the mobile te-
lephone have been selected, for each
name only one number is shown. If the
telephone contacts are selected, up to
four number categories can be shown*:
`HOME´,
`MOBILE´,
`OFFICE´,
`GENERAL
´.
*This function depends on your mobile
phone. Example for an entry