BURY iDEN Mo Talk User manual

Version 02/2008
25.1044.0-01-290208
Subject to change. Errors and ommissions excepted
iDEN Mo Talk
1
Index
Introductory information 2
1. General 2
2. Security guidelines 3
Installation of the hands-free car kit 5
3. Scope of supply 5
4. Positioning and mounting 6
5. Connecting the Electronic box 7
6. Functions of the keys on the remote control 8
Further Information 9
7. Service 9

2
Introductory information
1. General
Dear customer,
Congratulation on purchasing a BURY hands-free car kit. You have cho-
sen a high quality product that is extremely easy to use. All aspects of
BURY production through to sales and service are subject to strict qua-
lity management according to DIN EN ISO 9001. All BURY hands-free
car kits meet CE and e1 security standards. Furthermore, we provide a
two-year warranty on all components.
Please read the operating manual carefully so that you can fully enjoy
your BURY hands-free car kit. If you have any further questions concer-
ning installation or operation of your car kit, please contact your dealer.
He will be happy to give you reliable advice. You can also contact our
hotline. Our phone and fax numbers are listed in the chapter Service at
the end of the operating instructions.
Have a good trip!

3
2. Security guidelines
Installation – who and where
The installation of this system can be carried out by yourself but please
observe the installation requirements of the automotive manufacturer
(VAS 1978). During the installation, park the car at a place where the
road traffic is not impaired. We recommend to let a specialised work-
shop perform the installation.
Power supply
This system has been designed for the use in vehicles with an on-board
supply system of 12 volts (passenger car). If you intend to install the
device in a vehicle with an on-board supply system of 24 volts (lorry),
please use a voltage converter. If you have queries regarding this sub-
ject, please contact our hotline.
Position, volume
Install the components of the device in the vehicle so that your field of
vision is not impaired and the components are not mounted in the im-
pact zone of the passenger compartment or in the airbag inflation zo-
nes. The removal of coverings (with and without airbags) or compon-
ents of the dashboard requires – in some cases – special tools and
special knowledge.
Intended use
We shall not be liable for damages or malfunctions due to improper use
of the navigation system. Therefore, do not expose the device to mois-
ture, extreme temperatures or shocks and carefully follow the procedu-
re described in the installation and operating guidelines.
Use while driving
Operate the system only when the situation allows it and when you do
not endanger, harm, constrain, or annoy other road users. The volume
of the device has to be set in a way that exterior noise is still audible.

4Introductory information
Faults
Do not commission the device if you detect or assume a defect. In this
case, contact a Bury specialised dealer or our hotline. Improper repair
efforts can be dangerous for you. Therefore, only skilled personnel may
perform inspections.
Battery Charging
The charging process of the mobile phone battery starts after the con-
nection of the mobile phone to the hands-free device. It ends when the
mobile phone is disconnected.
Important:
The driver is ultimately responsible for the safe operation
and control of their vehicle at all times. You should never
use a hand held phone, including sending or reading text or
picture messages, while driving.
Research indicates that there is a risk to safety when the
driver of a motor vehicle is distracted and using a mobile
phone while driving can be a distriction.
The manufacturer strongly recommends that you use
a hands-free solution when driving.



9
Further Information
7. Service
In case of general or technical queries, suggestions and comments,
please do not hesitate to contact our team at any time:
Point to Point Technology USA, Inc.
USA Sales, Support & Warranty - 1-888-807-4838
www.ptp-group.net
Suggestions and feedback are always welcomed.

8Installation of the hands-free car kit
6. Functions of the keys on the remote control
Attention:
You can not use End call button to reject the incoming
call. If this button will be pressed when phone is ringing, the
call will be answered.

PTT key
Answer call
End call
5
Installation of the hands-free car kit
3. Scope of supply
Description of the components:
1) Electronics box iDEN Mo Talk
2) Remote control
3) Fixing screws for electronics box
4) Microphone with cable
5) Loudspeaker with cable
6) Power supply cable
7) Phone cable

6Installation of the hands-free car kit
4. Positioning and mounting
Step 1:
Please first select the location which is most suitable for you in your car
for the individual components.
Important:
When placing and assembling the components, observe
the information in the chapter: safety information.
Example of installation:
Step 2:
Depending on the vehicle type and its equipment (e.g. airbags), it is
reasonable to install the microphone either at the A-pillar, at the sun
shield or at the roof interior. For details about the equipment features
please refer to the vehicle documents. Please also observe the notes on
distances to other components and to the driver / speaker.
Step 3:
Please lay the cables in a way that they do not lie/hang unsecured in
the vehicle and that they may not influence the conducting of the ve-
hicle. When laying a cable, please take care that it is not under traction
stress but that it has some tolerance. Avoid crushing the cable as da-
mages of the insulation can be caused by friction/rubbing.

7
Step 4:
Install the electronics box at a convenient place in the vehicle. This can
e.g. be behind the radio, in the glove box, or in the centre console.
Please mind that you can access the connections of the box without
difficulty. Before connecting the components to the electronics box you
should branch off the battery for safety reasons. In doing so, take into
account that there might be a radio coding (confer radio manual).
Important:
Please install the electronics box behind a cover or so-
mewhere you can only reach by opening or unfastening
a protective cover/ a cover. The terminal box must not hang
loosely in the vehicle.
5. Connecting the Electronic box
The power supply of the hands-free car kit is established via a 2-core
cable. Connect the black (clamp 31 – minus) and the red cable
(clamp 30 – steady plus) to the power supply of your car. Please con-
nect the white Molex connector with connection 1.
Attention:
The hands-free car kit with connected phone will be per-
manently supplied with power. If the vehicle is not running
for a longer period, this could lead to a discharge of the car
battery.
Plug the phone jack of the loud speaker output to connection 3, the
phone jack of the microphone to connection 4 and connect the Molex
plug of the remote control with socket 2.
Now place the slider between the microphone and the loud speaker
box. This has the effect that the phone jack remains in its place in spite
of possible vibrations when driving.
Now connect the Molex plug of the phone cable with socket 5

