BURY CC 9060 Smart User manual

Index
Introductory information 2
1. General 2
2. Security guidelines 2
Installation of the hands-free car kit 4
3. Scope of supply 4
4. Positioning and mounting 6
5. Connections on the electronics box 9
6. Installation of the loudspeaker switch box AC 5120 13
7. Installation instructions for the fuses 17
Operating guidelines 18
8. Using the hands-free car kit for the first time 18
9. Handling possibilities 18
10. Voice control 18
11. Handling via Touch screen 20
12. Establishing a Bluetooth
®
connection 20
13. Menu navigation 22
14. Accepting, making, ending calls 32
Further Information 34
15. Service 34
CC 9060 Smart

2
Introductory information
1. General
Dear customer,
Congratulation on purchasing a BURY hands-free car kit. You have cho-
sen a high quality product that is extremely easy to use. All aspects of
BURY production through to sales and service are subject to strict qua-
lity management according to DIN EN ISO 9001. All BURY hands-free
car kits meet CE and e1 security standards. Furthermore, we provide a
two-year warranty on all components.
Please read the operating manual carefully so that you can fully enjoy
your BURY hands-free car kit. If you have any further questions concer-
ning installation or operation of your car kit, please contact your dealer.
He will be happy to give you reliable advice. You can also contact our
hotline. Our phone and fax numbers are listed in the chapter Service at
the end of the operating instructions.
Have a good trip!
2. Security guidelines
Installation – who and where
The installation of this system can be carried out by yourself but please
observe the installation requirements of the automotive manufacturer
(VAS 1978). During the installation, park the car at a place where the
road traffic is not impaired. We recommend to let a specialised work-
shop perform the installation.
Power supply
This system has been designed for the use in vehicles with an on-board
supply system of 12 volts (passenger car). If you intend to install the
device in a vehicle with an on-board supply system of 24 volts (lorry),
please use a voltage converter. If you have queries regarding this sub-
ject, please contact our hotline.

3
Position, volume
Install the components of the device in the vehicle so that your field of
vision is not impaired and the components are not mounted in the im-
pact zone of the passenger compartment or in the airbag inflation
zones. The removal of coverings (with and without airbags) or compo-
nents of the dashboard requires – in some cases – special tools and
special knowledge.
Intended use
We shall not be liable for damages or malfunctions due to improper use
of the hands-free system. Therefore, do not expose the device to moi-
sture, extreme temperatures or shocks and carefully follow the proce-
dure described in the installation and operating guidelines.
Use while driving
Operate the system only when the situation allows it and when you do
not endanger, harm, constrain, or annoy other road users. The volume
of the device has to be set in a way that exterior noise is still audible.
Faults
Do not commission the device if you detect or assume a defect. In this
case, contact a Bury specialised dealer or our hotline. Improper repair
efforts can be dangerous for you. Therefore, only skilled personnel may
perform inspections.
Important:
The driver is ultimately responsible for the safe operationX
and control of their vehicle at all times. You should never
use a hand held phone, including sending or reading text or
picture messages, while driving.
Research indicates that there is a risk to safety when theX
driver of a motor vehicle is distracted and using a mobile
phone while driving can be a distriction.
The manufacturer strongly recommends that you use aX
hands-free solution when driving.

4
Installation of the hands-free car kit
3. Scope of supply
150 cm
9
8

5
The hands-free car kit (HFCK) is supplied with different combinations of
components, depending on the sales regions (countries). The operating
manual refers to all versions.
Description of the components:
1) Electronics box
2) Monitor and installation pad
3) Fixing screws for electronics box, rider,
adhesive pad, cleaning cloth
4) Microphone
5) Installation and Operating manual on CD
6) Power supply cable with fuses
7) External loudspeaker switch box AC 5120
8) External loudspeaker
9) Loudspeaker connection cable
Version 1:
- Electronics box without integrated loudspeaker switch box
- With external loudspeaker switch box AC 5120
Version 2:
- Electronics box without integrated loudspeaker switch box
- with power supply cable
- with external loudspeaker
Version 3:
- Electronics box without integrated loudspeaker switch box
- with power supply cable
- with loudspeaker connection cable
Hinweis:
If certain components are added or omitted you will recei-X
ve the corresponding information on a separate enclosure.

6Installation of the hands-free car kit
4. Positioning and mounting
Step 1:
First of all, please choose the most convenient position for the monitor
and the installation pad in your vehicle by attaching the monitor / hook-
and-loop fastener to the pad and checking different positions in the
vehicle.
After having found a suitable position for the monitor in the vehicle you
can mount / attach the installation pad / hook-and-loop fastener accor-
dingly. Please use a cleaning cloth for degreasing the surfaces you want
to attach the installation pad to.
The end of the cable with the small Molex plug is ideally suited for pla-
cing through small openings in the dashboard area. This facilitates a
practically invisible installation of the cable. Take the length of the cable
into account and make sure that it is of sufficient length to reach the
intended location of the electronics box.
Important:
When positioning the monitor please take care that theX
monitor does not impair the view onto the road, that it will
not be installed in the impact zone of the passenger com-
partment (amongst others in the airbag inflation zones) and
that cables may be laid without any problems.
The installation pad / hook-and-loop fastener can be af-X
fixed just once, removing could damage the adhesive area.
In case of high variations in temperatures - depending on
the structure and the features - decolourisations of the sur-
faces can occur during the subsequent utilization.
Please avoid direct sunlight on the monitor or high inter-X
nal temperatures, which can be rapidly reached in parked
vehicles. In such cases, remove the monitor of the hands-
free car kit from the cradle and put it in the car glove pocket
or glove box for instance.

7
Example of installation:
13 24
65

8Installation of the hands-free car kit
Step 2:
Depending on the vehicle type and its equipment (e.g. airbags), it is
reasonable to install the microphone either at the A-pillar, at the sun
shield or at the roof interior. For details about the equipment features
please refer to the vehicle documents.
Step 3:
Please lay the cables in a way that they do not lie/hang unsecured in
the vehicle and that they may not influence the conducting of the vehi-
cle. When laying a cable, please take care that it is not under traction
stress but that it has some tolerance. Avoid crushing the cable as da-
mages of the insulation can be caused by friction/rubbing.
Step 4:
Install the electronics box at a convenient place in the vehicle. This can
e.g. be behind the radio, in the glove box, or in the centre console.
Please mind that you can access the connections of the box without
difficulty. Before connecting the components to the electronics box you
should branch off the battery for safety reasons. In doing so, take into
account that there might be a radio coding (confer radio manual).
Important:
Please install the electronics box behind a cover or so-X
mewhere you can only reach by opening or unfastening a
protective cover / a cover. The terminal box must not hang
loosely in the vehicle.

9
5. Connections on the electronics box
With the combinations of the product versions, different electronic bo-
xes can be used. These differ in terms of the arrangement and number
of the connections and in terms of their dimensions. Box 1 is eventual-
ly going to be completely replaced by Box 2.
The additional components of the hands-free car kit are connected to
the electronics box. The following connections are provided:
Box 1 Box 2
Connection options:
1 Power supply
2 Aux Out
3 Port for additional Accessory
4 External loudspeaker
5 Mikrophone
6 Monitor
7 basePlate System 9 adapted for CC 9060
8 Internal loudspeaker switch box
(with or without an internal switch box, depending on version)
17
8452
63
1234567

10 Installation of the hands-free car kit
1 - Power supply
Version 1:
Refer to the separate chapter: Installation of the audio switch box
AC 5120
Note:
If the DIN ISO plug of the AC 5120 does not fit in yourX
vehicle, numerous adapters are available from dealers.
Version 2 and 3:
The power supply of the hands-free car kit is established via a 4-core
cable (no. 6). Connect the black (clamp 31 – minus), the red (clamp 30
– steady plus) and the blue cable (clamp 15 – ignition plus) to the power
supply of your radio (where required via the cigarette lighter or the fuse
box). After connection to the counterpart, the yellow cable provides for
radio muting during a phone conversation. Please connect the white
Molex connector with connection 1.
Attention:
If you also connect the blue cable to clamp 30, the hands-X
free car kit will be permanently supplied with power. If the
vehicle is not running for a longer period, this could lead to
a discharge of the car battery.
2 - AUX-Out connection
Stereo music is output at connection 2. Here you can connect the AUX-
In input of your radio (if existent) via adapters available at local retai-
lers. For the connection to the hands-free car kit, the adapter must
have a 3.5 mm stereo jack. Depending on the car radio, the other end
must be selected otherwise. If your radio does not have an AUX-In, you
can use the car CD/MP3 adapter from the BURY accessories programme
to enable the reproduction of music via your radio.
3 – Connection for additional accessories
At this connection you can, for instance, connect a special 3 key remo-
te control from the BURY accessories. Please ask one of our specialist
retailers or contact our hotline for further information.