Car Solutions BMW-PIP User manual

Updated date : 2011.07.18Updated date : 2011.07.18
Model : PIPModel : PIP--BMWBMW--STDSTD--V1 / Product code : PIPV1 / Product code : PIP--BMBM--08100810--202202
BMWBMW--PIPPIP
User manual
Model : PIPModel : PIP
--
BMWBMW
--
STDSTD
--
V1 / Product code : PIPV1 / Product code : PIP
--
BMBM
--
08100810
--
202202
For 3/5/6 series, X5, X6For 3/5/6 series, X5, X6
www.car-solutions.com [email protected]m.ua
carsolutions.com.ua

Contents
4
3
5
6
7
1. Before installation
1.1 Main specification
1.2 Features
1.3 System diagram
1.4 Components
1.5 Exterior
7
2.1.1 DIP switch
2.1.2 DIP switch
2.2 Remote controller
2.3 Keypad
2.4 OSD (on screen display)
2.5.1 FACTORY mode
2.5.2 FACTORY mode
2.6 Rear view parking guide line
2.7 CAN Wiring & Steering wheel button
8
9
10
11
14
12
13
15
16
1.5 Exterior
2. Setup
www.car-solutions.com 2
22
2
2.7 CAN Wiring & Steering wheel button
16
17
18
19
3. Installation
3.1 Cautions on installation
3.2 Installation diagram
3.3 Installation
4. Troubleshooting 25
2525
25
carsolutions.com.ua

1.1 Main specification
1. Input Spec. (MULTI VIDEO INTERFACE)
- 1 x Analog RGBCs (or Sync by Green)
- 1 x REAR-C Input (Rear camera source)
- 3 x A/V Input (NTST & PAL auto detection)
-
1 x
LCD Input
(OEM video input)
-
1 x
LCD Input
(OEM video input)
2. Output Spec.
- 2 x CVBS OUTPUT (Video Out for installed headrest monitors)
- 1 x Audio OUTPUT
- 1 x LCD Output(OEM video output)
- 4 x Audio Select Output (12V power comes out from 4wires of cable by AV1, AV2, AV3 & Navi modes)
3. Power Spec.
- Input Power : 8VDC ~ 18VDC
- Consumption Power : 12WATT, Max
www.car-solutions.com 3
33
3
4. Mode change
- Input Video skip : able to skip each input source via adjusting DIP switch
- Control by using the remote controller
- Able to change a mode by using toggle switch
- Able to change a mode by button on the steering wheel in the car via CAN
carsolutions.com.ua

1.2 Features
- PIP Function (Picture In Picture available only for cars with 8.8” LCD type)
- Higher Quality
- Controlling PIP function by “★” button on the steering wheel
(The products which are shipped to Japan are different)
-
Switching
AV source by “ “ on the steering wheel
-
Switching
AV source by “ “ on the steering wheel
(The products which are shipped to Japan are different)
- Easier operation with new remote control.
- Upgraded OSD Menu
- Displaying ExternalAV sources through composite, RGB
- ControllingAV sources (DVD, Navi) by I-DRV – Optional
www.car-solutions.com 4
44
4
[PIP – A/V mode][PDP – Rear Camera]
carsolutions.com.ua

1.3 System diagram
NAVIGATION Input
MCU
OSD keypad Switch for source toggle
OEM Navi Button (Can Interface)
DISPLAY
A/V 1
NAVIGATION Input
(Analog RGBCs)
REAR-C In
(Rear camera)
A/V 2
A/V 3 VIDEO
CIRCUIT VIDEO MUX
MCU
Car installation
OEM LCD
www.car-solutions.com 5
55
5
(OEM video input)
Car Screen Input
Power Input
(+8VDC ~ +18VDC)
POWER
CIRCUIT
Dip S/W
A/V OUT HEADREST
MONITOR
(Video out 2
Audio L, R1)
FMTX
carsolutions.com.ua

1.4 Components
LVDS cable(F-TYPE) * 1pc.
IR cable (8P) x 1pc.
AV cable * 1pc.
OR
Cable for
OSD Keypad x 1pc.
Remote control x 1pc.
www.car-solutions.com 6
66
6
POWER cable (10P) * 1pc. MODE butto * 1pc. RGB cable * 1pc.
OSD Keypad x 1pc.
OSD Keypad x 1pc.
carsolutions.com.ua

1.5 Exterior
⑤⑥⑦⑧⑨
⑤⑥⑦⑧⑨
Dimensions
Horizontal length -154mm
Vertical
length
-
94mm
①POWER/CAN
②MODE
③RGB(IN)
④AV(IN/OUT)
⑤LCD-OUT
Vertical
length
-
94mm
Height - 20mm
www.car-solutions.com 7
77
7
⑥LCD-IN
⑦KEYPAD
⑧DIP S/W
① ③ ④②
⑨LED
① ③ ④②
carsolutions.com.ua

2.1.1 DIP switch
DIP # Function DIP S/W selection
1RGB Input ON : RGB input is OFF
OFF : RGB input is ON
2
A/V1
Input
ON : A/V1 input is OFF
OFF : A/V1 input is ON
2
A/V1
Input
OFF : A/V1 input is ON
3A/V2 Input ON : A/V2 input is OFF
OFF : A/V2 input is ON
4A/V3 Input ON : A/V3 input is OFF
OFF : A/V3 input is ON
5Monitor Size ON : For Cars with 6.5” LCD (Possible to use BMW 1 series)
OFF : For Cars with 8.8” LCD
6
Type of monitor ON : Siemens LCD (only when DIP #5 is turn ON)
OFF : Alpine LCD (only when DIP #5 is turn ON)
www.car-solutions.com 8
88
8
6
(Refer to next page) ON : 2009 model’s 3series (only when DIP #5 is turn OFF)
OFF : Cars with 8.8” LCD
7Rear Mode ON : External Rear Camera
OFF : OEM Rear Camera
8NOT USED
carsolutions.com.ua

2.1.2 DIP switch
DIP #
Monitor size 5 6
E60 8.8” OFF OFF
E60
Alpine 6.5”
ON
OFF
[E60 8.8” LCD]
E60
Alpine 6.5”
ON
OFF
E60 Siemens 6.5” ON ON
※
※※
※DIP S/W Use Example
[BMW E60-6.5” Alpine]
-. Use Input Mode : A/V3(DVD), Navigation (RGB)
-. Rear Camera : When to be installed on CVBS 4
▷
DIP S/W : 1

OFF
[E60 Alpine 6.5” LCD]
www.car-solutions.com 9
99
9
▷
DIP S/W : 1

OFF
▷DIP S/W : 2,3 ON (INPUT MODE SKIP)
▷DIP S/W : 4 OFF (enableA/V3)
▷DIP S/W : 5 ON (6.5”Alpine)
▷DIP S/W : 6 OFF
▷DIP S/W : 7 ON (enable CVBS4)
▷DIP S/W : 8 OFF
[E60 Siemens 6.5” LCD]
[2009 Year 3 series]
carsolutions.com.ua

2.2 Remote controller
Buttons Function
POWER NOT USED
※Remote or Keypad (Optional)
PIP Activating PIP (Picture in Picture, only for cars with 8.8”)
MENU OSD Menu
OK Making a selection
▲Move UP
www.car-solutions.com 10
1010
10
▼Move DOWN
◀Move LEFT (Or press 2 seconds - Factory mode)
▶Move RIGHT (Or press 2 seconds - Factory Reset)
carsolutions.com.ua

2.3 Keypad
※Remote or Keypad (Optional)
Buttons Function
MENU/EXIT OSD Menu or switching to previous mode
SEL/INPUT Selection in menu or switching AV sources
UP Move LEFT or UP
www.car-solutions.com 11
1111
11
DOWN Move RIGHT or DOWN
UP+DOWN at once SAFE MODE implementation
*FACTORY MODE (Interface setting) : Operated by pressing ▲ → ▼ → ▲ →MENU of remote or keypad in order.
carsolutions.com.ua

2.4 OSD (on screen display)
OSD menu : Operated by pressing MENU button of remote control.
Analog RGB mode Analog RGB mode Analog RGB mode
Video mode Video modeVideo mode
IMAGE
OSD
UTIL
www.car-solutions.com 12
1212
12
IMAGE
- BRIGHTNESS
- CONTRAST
- SATURATION
- HUE
- SHARPNESS
- USER IMAGE : To choose a option
among 4 prepared color shade.
OSD
- LANGUAGE : To change the language
displaying on navigation, DVD, CMMB OSD
menu (select 1 among English or Chinese)
- TRANS : Transparency control of the OSD
background
- H_POSITION : Horizontal movement of the
OSD window
- V_POSITION : Vertical movement of the
OSD window
UTIL
- FACTORY RESET : To reset all the
values about navigation, DVD screen to
factory default. (NOT available for reset of
the position value of images, only for
functions inside OSD menu)
carsolutions.com.ua

2.5.1 Factory mode
PARK
-PARK ENABLE : Setup of rear view parking guide line
- H-POSITION : Control over horizontal movement of screen
- V-POSITION : Control over vertical movement of the screen
*FACTORY MODE : Operated by pressing ▲ → ▼ → ▲ →MENU of remote or keypad in order.
www.car-solutions.com 13
1313
13
UTIL
-CAR MODEL selection
: E60 – When to install BMW 5 series (E60)
: E60_OLD – When there is a offset problem on E60
: E70 – When to install BMW X5 (E70)
※
※※
※Selecting / Choosing function is by “SEL” button on the Keypad
carsolutions.com.ua

2.5.2 Factory mode
UTIL
- I-DRIVE
: NEW I-DRV – When there is a New I-Drive on the car like the picture as shown
*FACTORY MODE : Operated by pressing ▲ → ▼ → ▲ →MENU of remote or keypad in order.
: OLD I-DRV – When there is a Old I-Drive on the car like the picture as shown
<2009 model I-DRIVE>
<~2008 model I-DRIVE>
※328i, 335i 2009model : OLD I-DRIVE, 5 series : NEW I-DRIVE
UTIL
-REAR CAM
:
Rear Wire
-
When to install Back
-
up Cam by rear wire of power cable
www.car-solutions.com 14
1414
14
:
Rear Wire
-
When to install Back
-
up Cam by rear wire of power cable
(Same with previous version)
: CAN-BUS - When to install Back-up Cam by CAN wiring. In this case, when the car is in
reverse, the CAM is detected automatically.
※
※※
※Selecting / Choosing function is by “SEL” button on the Keypad
carsolutions.com.ua

2.6 Rear view parking guide line
Factory Default : DISPLAY - DISABLE
When the car gear is in reverse, register the value
needed on the “PARK ENABLE” as “ON” in the
PARK section as shown left.
Then, the left image will be displayed on the screen.
Able to move the line with H-Position on the factory mode. Then
adjust horizontal position of the guide line.
www.car-solutions.com 15
1515
15
Able to move the line with V-Position on the factory mode. Then
adjust vertical position of the guide line.
carsolutions.com.ua

2.7 CAN Wiring & Steering wheel button
☆: PIP Mode
: SwitchingAV source with long press
※The products which are shipped to Japan are
different
Orange+Black:
CAN HIGH
different
www.car-solutions.com 16
1616
16
Yellow:
CAN LOW
carsolutions.com.ua

3.1 Cautions on installation
Ignition key should be taken off before starting installation, interface power connection must be the last step in
installation.
Power cable should be separated when connecting interface.

Should be no any electronic devices or magnetic pole around installation place.

Should be no any electronic devices or magnetic pole around installation place.
All steps of installation should be done by well-trained specialist.
Dismantling without manufacturer s permission can not be guaranteed, (No permission to break attached label
on the board.)
Kindly check all parts are in the box, when receiving the product, if anything missing, inform to the supplier or
manufacturer.
According to our sales policy, any problems caused by user s mistake, careless can not be guaranteed.
www.car-solutions.com 17
1717
17
carsolutions.com.ua

Back side of
Monitor
connector
Original LCD cable
Original CAN wire Control Box
3.2 Installation diagram
LVDS cable(
-
TYPE)
y
e
l
l
o
w
w
h
i
t
e
CAN
MODE
LCD-IN
POWER/CAN RGB(IN) A/V(IN/OUT)
LED LCD-OUT
KEYPAD
DIP S/W
LVDS cable(
-
TYPE)
CAN
www.car-solutions.com 18
※Wiring CAN High (White) of the
interface with the CAN High
(Orange+Black) of the car.
※Wiring CAN Low (Yellow) of the
interface with the CAN Low (Yellow) of
the car.
R DATA (red) G DATA (green) B DATA (blue)
NAVI
SYNC (white)
GND (black)
DVD
AV1 AV2 AV3
REAR C
Audio L
Audio R
AV/OUT Video
AV3-SEL
AV2-SEL
AV1-SEL
NAVI SEL
CAN(L)
CAN(H)
SAFE
REAE-C
GND
ACC
carsolutions.com.ua

4. Troubleshooting
Q. I can not switch A/V sources.
A. Check IR or Ground cable connection. Check LED lamps in the interface, if it is not on, check power cable.
Q. All I got on the screen is black.
A. Check second LED lamp of the interface is on, if not, check A/V sources connected are working well.
(Second lamp indicates AV sources connected works well.)
Check interface connection has been done well.
(Second lamp indicates AV sources connected works well.) Check interface connection has been done well.
Q. Displayed image color is not proper. (too dim or not suitable color)
A. Try to select “INITIAL” in OSD menu, if it does not work, inform the manufacturer.)
Q. Rear camera image does NOT appear.
A. Set DIP switch #7 in “ON”
Q. Unwanted A/V mode is displayed. (A/V source switching order : OEM->RGB->AV1->AV2->AV3)
A. Check DIP Switch Setting.
www.car-solutions.com 19
1919
19
Q. OEM image is not displayed.
A. Check interface’s LCD In/Out cable connection. If the status keeps on, inform the manufacturer.
Q. Screen only displays white like left picture.
A. Check LCD out cable is connected well, if this status keeps, inform the manufacturer.
carsolutions.com.ua