Car Solutions QVL-E65-V2 User manual

Video Interface for BMW E65
Specification & InstallationSpecification & Installation
Compatible with BMW 7 Series(E65/66)
Last updated: 2011.08.18Last updated: 2011.08.18
Model : Model : QVLQVL--E65E65--V2 V2 / Product code : / Product code : BMBM--09010901--652652
www.car-solutions.com [email protected]
Car-Solutions.com

Contents
www.car-solutions.com 2
3. Installation
3.1 Cautions on installation
3.2 CAN Installation
3.3 Installation
18
19
4. Troubleshooting 21
1. Before installation
1.1 Main specification
1.2 Features
1.3 System diagram
1.4 Components
1.5 Exterior
1.6 POWER cable
4
3
5
6
7
8
2. Setup
2.1 DIP switch
2.2 Keypad usage
2.3 Remote control usage
2.4 Factory mode
2.5 OSD (on screen display)
2.6 Parking guide line
2.7 BMW Handle button NAVI setting
2.8 FMTX Frequency Setting
9
11
12
14
15
16
17
20
13
Car-Solutions.com

1.1 Main specification
www.car-solutions.com 3
1. Input Spec. (MULTI VIDEO INTERFACE)
-. 1 x Analog R,G,B (Sync on Green)
-. 1 x CVBS(REAR CAMERA) Input. (Rear camera source)
- 3 x A/V (NTST & PAL) Input.
-. 1 x LCD Input (Car system Input)
2. Output Spec.
-. 2 X CVBS OUTPUT (Video Out for installing Headrest monitor)
-. 1 x Audio OUTPUT
-. 1 X LCD OUTPUT(LCD Operation)
3. Electric Power Consumption
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12WATT, Max
4. Switching Mode (AV source)
- Possible to skip AV source while switching Mode (AV source) by DIP S/W
(Refer to the DIP S/W page)
- By ‘SET’ button of the OSD Keypad
- By Toggle Switch (Option)
- By ‘Menu’ button of the car through CAN
※ This function may not support E65 old version which is without “Menu button”
Car-Solutions.com

1.2 Features
www.car-solutions.com 4
- FMTX Module is added in the product. (No need additional FMTX
Module for Audio)
- Offering OSD Key Pad
(The remote control is not offered anymore)
- Possible to move the displayed position of Navi (Only on RGB mode)
- Changed OSD MENU
Car-Solutions.com

1.3 System diagram
www.car-solutions.com 5
DISPLAY
(CAR MAIN BOARD)
A/V 1
NAVIGATION Input
(Analog RGB)
CVBS IN
(Rear camera)
Car Screen Input
A/V 2
A/V 3
VIDEO
CIRCUIT
VIDEO MUX
MCU
Power Input
(+8VDC ~ +18VDC)
POWER
CIRCUIT
Dip S/W
A/V OUT
HEADREST
MONITOR
OSD Keypad Switch for source toggle
OEM NAVI Button (Can Interface)
Car Installation
OEM LCD
Rear Camera
FMTX
(Video out 2
Audio L, R1)
Car-Solutions.com

1.4 Components
www.car-solutions.com 6
POWER cable (6P) * 1eaAV cable * 1ea
MODE cable * 1ea
CAN cable * 1ea
OR
Keypad * 1ea
Ground cable * 1ea
IR cable (8P) * 1ea
Remote control * 1ea FPC cable * 1ea
FFC cable (50P) * 1ea
RGB cable * 1ea
Car-Solutions.com

1.5 Exterior
www.car-solutions.com 7
① ② ③ ④ ⑤ ⑥
⑦ ⑧ ⑨
① DIP switch
② LED
③ MODE
④ RBG IN
⑤ A/V(IN/OUT)
⑥ POWER
⑦ KEYPAD
⑧ LCD IN/OUT
⑨ CAN I/F
Dimension
Horizontal length 149mm
Vertical length 91mm
Height 19mm
Car-Solutions.com

1.6 POWER cable
www.car-solutions.com 8
Blue
FMTX
I - DRV
GND
LAMP - RV
ACC
990mm
FILTER
& FUSE BOX
주황색
검정색
빨강색
회색
Red
Gray
Orange
Black
파란색
990mm
Car-Solutions.com

2.1 DIP switch
www.car-solutions.com 9
#PIN FUNCTION DIP S/W Selection
1 RGB INPUT MUTE ON : Skipping RGB Mode
OFF : RGB Display
2 A/V 1 MUTE ON : Skipping A/V 1
OFF : A/V1 Display
3 A/V 2 MUTE ON : Skipping A/V 2
OFF : A/V2 Display
4 A/V 3 MUTE ON : Skipping A/V 3
OFF : A/V3 Display
5 To select monitor size ON : 6.5” LCD Setting
OFF : 8.8” LCD Setting
6 N.C
7 Rear Mode ON : External Rear Camera
OFF : OEM Rear Camera
8N.C
※ ON : DOWN / OFF : UP
Car-Solutions.com

2.1 DIP switch
www.car-solutions.com 10
※DIP S/W Use Example
[BMW E65-6.5 Inch]
-. Use Input Mode : A/V3(DVD), Navigation (RGB)
-. Rear Camera : When to be installed on CVBS 4
▷ DIP S/W : 1 OFF
▷ DIP S/W : 2,3 ON
(INPUT MODE SKIP)
▷ DIP S/W : 4 OFF (enable A/V3)
▷ DIP S/W : 5 ON (6.5 Inch)
▷ DIP S/W : 6 OFF
▷ DIP S/W : 7 ON (enable CVBS4)
▷ DIP S/W : 8 OFF
[E65 8.8 Inch]
[E65 6.5 Inch]
#PIN
Type of monitor 5
E65 8.8” OFF
E65 6.5” ON
Car-Solutions.com

2.2 Keypad usage
www.car-solutions.com 11
Select one between the remote controller and the keypad
FACTORY MODE (Interface setting) :
Press these buttons on OSD keypad in the following sequence; UP→DOWN→UP →MENU
KeyKey FunctionFunction
MENU/EXIT Activating OSD menu and Getting back to the previous state after setting mode
SEL/INPUT Making a selection and hanging modes
UP Moving leftward or upward (If you press this button 2 seconds long, you can get access
to HOT KEY function.)
DOWN Moving rightward or downward (IF you press this button 2 seconds long, you can reset
all data.)
Car-Solutions.com

2.3 Remote control usage
www.car-solutions.com 12
KeyKey FunctionFunction
POWER & PIP Unavailable
MENU Activating OSD menu
OK Making a selection, changing image display
▲
Moving upward
(If you press this button 2 seconds long, “Hot key” function will
activate/ deactivate.)
▼ Moving downward
◀
Moving leftward
(If you press this button 2 seconds long, you can get access to the
factory mode.)
▶
Moving rightward
(If you press this button 2 seconds long, you can reset all the data
about user environment.)
What is Hot Key function ?
You can use this function via pressing number “1” button next to the radio button. You can change audio source to the external
AUX with this function. (original function of BMW) Our device let it change to an external video source for driver to use this
function via this button. So, you can change sources (audio<->video) by pressing this button without any other install process.
Car-Solutions.com

2.4 FACTORY mode
www.car-solutions.com 13
POSITION
–H-POSITION : moving in horizontal direction
- V-POSITION : moving in vertical direction
I-DRV
–To control DVD, Navi by I-DRV (Optional)
Refer to the “BMW Handle button NAVI setting” page.
FM-TX
- FM-TX USE : Set up for FMTX
- FREQUENCY : FMTX Frequency Setting.
(Refer to the next ‘FMTX frequency setting’ page)
REAR-CAM
- By Rear Wire : When to install Back-up Cam by rear wire of
power cable (Same with previous version)
- By CAN-BUS : When to install Back-up Cam by CAN wiring.
When the car is in reverse, the CAM is detected automatically.
FACTORY mode : Operated with pressing UP->DOWN->UP->MENU keys on the keypad in sequent or
Press ◀button 2 seconds long on the remote control.
Car-Solutions.com

2.5 OSD (on screen display)
www.car-solutions.com 14
Analog RGB Mode
COLOR
-BRIGHTNESS
-CONTRAST
-RED
-GREEN
-BLUE
-COLOR BOX : Selecting one
among 3 color options
-SATURATION
-SHARPNESS
OPTION
-OSD H_POS
: Move of OSD window to Left, Right
-OSD V_POS
: Move of OSD window to Up, Down
- OSD TRANS
: OSD window transparency setting
- SCREEN MODE
: Screen Rate setting (4:3, 16:9)
- INITIAL : Initializing OSD setting
value
Video mode
Analog RGB Mode Video mode
Car-Solutions.com

2.6 Parking guide line
www.car-solutions.com 15
① When the car is in reverse, if
press ‘UP’ key for 2 sec, the
guide line appears on the screen.
Factory Default : DISPLAY - DISABLE
② If you need to move the line
position, press ‘SEL’ key on
the above step.
(Use ‘Up’, ‘Down’ Key of Keypad)
③ On step no.2, once press “SEL”
key again, you can move the
line vertically by “UP”, “Down”
keys.
Car-Solutions.com

2.7 BMW Handle Button NAVI setting
www.car-solutions.com 16
Oversea
Domestic
After implementing FACTORY MODE
(Interface setting), select I-DRV and press the
Sel button of Keypad, and then Navi Setting
window is displayed as shown right.
After selecting the one among RGB, AV1~3,
press the Sel button of keypad.
(It is fine to select any channel, because the
selecting of RGB, AV1~3 is useless. But, the
channel selected on this step will be
exempted on next channel selecting step.)
When the above steps is finished, the
window is displayed as shown left. ARION,
NET-770, ML-100S, ML-740T are Domestic
DMB model. Select the model you want to
use, after that select the channel of RGB,
AV1~3.
(The channel selected on the above steps
is exempted.)
NET-770 (DMB model) is designated AV1
as shown right.
※This function is not supported at domestic NAVI, but this setting is necessary for implementation of Domestic DMB.
※When DVD-IR (Black) wire of RGB-IN cable is connected to IR input wire of DMB, able to operate via handle buttons.
Car-Solutions.com

2.8 FMTX Frequency Setting
www.car-solutions.com 17
Get the Factory Mode Operated with pressing UP->DOWN-
>UP->MENU keys of the keypad in sequent.
Set “FM-TX USE” to “ON” as shown left. (‘ON’ is Default).
Control the frequency by “UP”, “Down” keys.
At the bottom, you can see present frequency and control it
from 87.5MHZ to 108MHZ. (1MHZ per each time to press)
Factory Default : FMTX USE – ON, FREQENCY – 87.5MHz
※If you do not want this function, should set “FM-TX USE” to “OFF”
Car-Solutions.com

3.1 Cautions on installation
www.car-solutions.com 18
Ignition key should be taken off before starting installation, interface power connection must be
the last step in installation.
Power cable should be separated when connecting interface.
Should be no any electronic devices or magnetic pole around installation place.
All steps of installation should be done by well-trained specialist.
Dismantling without manufacturer’s permission can not be guaranteed, (No permission to break
attached label on the board.)
Kindly check all parts are in the box, when receiving the product, if anything missing, inform to the
supplier or manufacturer.
According to our sales policy, any problems caused by user’s mistake, careless can not be
guaranteed.
Car-Solutions.com

3.2 CAN Installation
www.car-solutions.com 19
E65 CAN Wiring Diagram
Green: CAN LOW
Orange: CAN HIGH
Car-Solutions.com

3.3 Installation
www.car-solutions.com 20
1. Connect the FFC cable to FPC cable as
shown above.
2. Connect the FFC cable to the LCD-IN/OUT
connector of the board as shown above.
3. Connect the LVDS cable of head unit to
FPC cable as shown above.
4. Connect the FPC cable to the connector of
head unit as shown above.
Car-Solutions.com