Car Solutions QPI_BM16 User manual

Car-Solutions.com
[email protected]
www.car-solutions.com

•Specification
Car Compatibility :
2017 BMW CAR with Evo2 I-Drive5
1,2,3,4,5,6,7 Series, Mini, X3, X4, X5 8.8”, 10.2”
※ Monitors with/without OEM touch are supported
Components : Interface* 1ea
Multimedia interface Input/output spec
Input : Analog RGB*1, A/V*3, CVBS(Rear camera)*1
CVBS(Front camera)*1
Output : To LCD*1
Power spec
Input power : 8VDC ~ 18VDC
Consumption : 5WATT
Switch input mode
- External video sources skip function : able to control input
videos on and off via DIP switches.
-Able to switch videos via the remote, button switch, and
original buttons(Mode, #7)
-Able to detect the rear view camera via CAN.
2
•Features
Control external videos sources (DVD, DTV) via Multi Media
Touch
Adjust external videos screen position
Check the improved Screen Display (User Friendly Interface)
Switch modes via original OEM button
Supply power to rear camera (Back up camera)
Assist your parking via Dynamic PAS(Parking Assistance System)
Car-Solutions.com
[email protected]
www.car-solutions.com

3
•Product Exterior
•Components
POWER * 1ea
(HPOWER0096)
LCD* 1ea
(HLCDCA0019)
A/V * 1ea
(HAVCAB0002)
IR * 1ea
(HIRCAB0002)
BUTTON * 1ea
(HARETC0001)
Remote * 1ea
(REMOTE0001)
REAR * 1ea
(HARETC0002)
IR OUT * 1ea
(HIRCAB0007)
MT option * 1ea
(HARETC0233)
RGB * 1ea
(HRGBCA0013)
Car-Solutions.com
[email protected]
www.car-solutions.com

※ ON : DOWN / OFF : UP
4
•DIP SWITCH
PIN Function Dip S/W
1 RGB mode OFF : RGB mode display
ON : RGB mode
2 AV1 mode OFF : AV1 mode display
ON : AV1 mode skip
3 AV2 mode OFF : AV2 mode display
ON : AV2 mode skip
4
Monitor type
4-OFF, 5-OFF : 1440*540
4-OFF, 5-ON : 1280*480
4-ON, 5-OFF : 800*480
5
6 Car model OFF : 5, 7 Series CAN
ON : 3, 4 Series, X5 CAN
7 Rear Camera OFF : OEM rear camera
ON : External rear camera
8 TV Free Setting OFF : BYPASS mode
ON : TV FREE mode
※ Please make sure to disconnect the power cable of the interface and reconnect the
power cable again to apply the dip switch setting whenever changing DIP switch.
Otherwise, DIP switch setting will not be applied.
•REMOTE CONTROL
Car-Solutions.com
[email protected]
www.car-solutions.com

5
•Factory setting
PAS TYPE : Select type of parking guide line
- NOT USED : No use parking guide line
- PAS ON : Selecting Dynamic parking guide line
- PAS OFF : Selecting fixed parking guide line
PAS SETUP : Adjusting the position of the parking guide line
REAR TYPE : Choose rear camera recognition.
- CAN : By connecting to “CAN” cable of the car gear, changing to rear
camera mode when shifting into reverse. (Connect “CAN” cable of the
power cable to the “CAN” cable of the car gear.)
- LAMP : By connecting to the rear lamp of the car, switch to rear camera
mode when shifting into rear. (Connect “Rear-C” cable of the power
cable to the rear lamp of the car.)
SAFE ENABLE :
Enable –More than 20km/h;
RGB, and A/V mode will not be displayed (Default : OFF)
Less than 20km/h;
RGB, and A/V mode will be displayed again
RADAR ENABLE : Setting up parking distance alarm sensor. (ON/OFF)
<H-POSITION> <V-POSITION>
IMAGE
PARK
UTIL1
UTIL2
INFO
H-POSITION
V-POSITION
H-SIZE(NAVI)
Menu of FACTORY
MENU to Return SEL to Select/Save
IMAGE
PARK
UTIL1
UTIL2
INFO
PAS TYPE
PAS SETUP
REAR TYPE
SAFE ENABLE
RADAR ENABLE
PDC TYPE
Menu of FACTORY
MENU to Return SEL to Select/Save
Adjust a current screen position and size.
H-POSITION : Move display horizontally
V-POSITION : Move display vertically
H-SIZE(NAVI) : Adjust the image of navigation
horizontally
Adjust rear view camera setting.
Car-Solutions.com
[email protected]
www.car-solutions.com

6
•Factory setting
Navigation & Car model setting up
NAVI MODEL : Choose RGB navigation
AVOUT SELECT : Selecting background sound
via car AUX
FCAM FUNC :
FCAM_OFF : A shift in gear : P→R→D,
Display the image shown while P mode
FCAM_EXT : A shift in gear : P→R→D,
Display the image of FCAM for 5 secs,
then display the image shown while P mode
FCAM_OEM : A shift in gear : P→R→D
Display the OEM image for 5 secs
then display the image shown while P mode
AV3 SKIP : Display/skip AV3 mode (ON/OFF)
ACTORY RESET : Reset
Other options setting up
IDRV REMOTE : Able to use remote control on
DVD, DTV by selecting “User”
after IR memory registered
IDRV CONTROL : Able/disable to control UI remote
by touch
IR MEMORY : Register IR memory of DTV and DVD
※ Refer to “IR MANUAL” for more details
HANDLE KEY : Able/disable to use the OEM button
on the handle
(Default : OFF)
MEMORY KEY : Able/disable to use the memory
button (Default : OFF)
IMAGE
PARK
UTIL1
UTIL2
INFO
IDRV REMOTE
IDRV CONTROL
IR MEMORY
HANDLE KEY
MEMORY KEY
Menu of FACTORY
MENU to Return SEL to Select/Save
IMAGE
PARK
UTIL1
UTIL2
INFO
SYSTEM VERSION
(MAIN -130723)
(TRIP -130723)
Menu of FACTORY
MENU to Return SEL to Select/Save
System version information.
IMAGE
PARK
UTIL1
UTIL2
INFO
Menu of FACTORY
MENU to Return SEL to Select/Save
CAR MODEL
AVOUT SELECT
FCAM FUNC
AV3 SKIP
FACTORY RESET
Car-Solutions.com
[email protected]
www.car-solutions.com

7
•OEM button
<I-Drive>
<Memory Button><Steering wheel>
Section Button Operation Function
Steering
Wheel
VOICE
Short press Mode switch
Short press PIP mode choice
Wheel up Short press Multimedia Channel UP
Wheel Down Short press Multimedia Channel DOWN
Memory #7 Short press Mode switch
I-Drive
MAP 2 sec Mode switch
OPTION 7 sec RESET
BACK
7 sec FACTORY mode: ON
Short press FACTORY mode: back
MENU
2 sec Mode switch
Short press Selection
(FACTORY mode, Multimedia)
Rotate
left or right Short press Multimedia mode ON
Push south 2 sec PIP mode
※ Able to switch the mode or activate the function by OEM button
※ Return to OEM mode if any button of I-DRIVE is pressed for a short time
except “back” button)
Car-Solutions.com
[email protected]
www.car-solutions.com

8
•Rear camera mode PIP
< OEM reverse image> < OEM + supplied PAS >
Able to display PDC + OEM PAS or PDC + supplied PAS while in reverse
- Setting : Press voice button on the wheel for a short time to activate PIP
while in Reverse.
•A/V mode PIP
Able to display OEM&AV image together in A/V mode
- Setting : Push I-Drive south for a long time to activate PIP mode
※ Image order : Full AV mode → PIP image<1> → PIP image<2>
Display Full AV mode
Full AV mode
PIP image<1>
PIP image<2>
Display AV&OEM mode together
AV image is bigger than OEM
image
Display AV&OEM mode together
OEM image is bigger than AV
image
Car-Solutions.com
[email protected]
www.car-solutions.com

9
•Installation Diagram
Mode cable
RGB
NAVIGATION
IR cable
AV1 AV2 AV3
REAR C
Audio L
Audio R
AV/OUT Video
REAR (9V OUT)
GND
In case of
Rear lamp connection
Car-Solutions.com
[email protected]
www.car-solutions.com

10
•CAN/Power cable
I-Drive
OEM cable
Supplied
Power cable
※Two ways to connect CAN/POWER cable
1. In case of connecting the cable from I-Drive,
TV free is not supported(Dip switch #8-Off)
2. In case of connecting the cable from the Headunit
TV free is supported(Dip switch #8-On)
•I-Drive
•Headunit
1
Connect the optical fiber cable to the
supplied power cable.
Connect the provided power
cable to the backside of monitor.
Connect the bunch of original
cables to the provided power
cable (Female connector)
Pull out the bunch of cables from
the backside of command and
Disconnect the marked optical fiber cable.
2
43
Detach OEM cable from I-Drive and
connect it to the supplied power cable
Car-Solutions.com
[email protected]
www.car-solutions.com