Car Solutions QVI-BM-1107-004 User manual

Video Interface for BMW
3/5/6/7 Series
V5.1
User Manual
Release date : 2011.07.14
Model : QVI-BM09-MAIN-V5.1 IF / Product code : QVI-BM-1107-004
www.car-solutions.com [e-mail]
Car-solutions.com

Contents
www.car-solutions.com 2
3. Installation
3.1 Installation diagram
3.2 Cautions on installation
3.3 Installation
20
21
22
4. Troubleshooting 24
1. Before installation
1.1 Main specification
1.2 Features
1.3 System diagram
1.4 Components
1.5 Exterior
1.6 POWER cable
4
3
5
6
7
8
2. Setup
2.1 DIP switch
2.2 Setup for car model & navigation
2.3 Factory mode
2.4 Original buttons usage
2.5 Remote controller usage
2.6 Keypad usage
2.7 Setup for rear camera
2.8 OSD (on screen display)
9
10
11
13
14
15
16
18
Car-solutions.com

1.1 Main specification
www.car-solutions.com 3
1. Compatibility
Most of brand-new cars coming with CIC Navigation Computer System including BMW 3,5,6,7,Xseries
2. Product composition
Multimedia Interface (made for specific models) * 1ea
Most TV-Free (displaying original DVD and navigation) – optional
3. MULTIMEDIA INTERFACE input spec.
3 * A/V input (external video input)
1 * CVBS input (rear camera source input)
1 * Analog RGB input (navigation system output)
1 * LCD input (car system input)
4. MULTIMEDIA INTERFACE output spec.
1 * LCD output
5. POWER spec.
input power : 8VDC ~ 24VDC
consumption power : 12WATT (in maximum level)
6. Switch input mode
Input video skip function : able to select whether to use the respective input video sources or not via DIP switch.
Able to change input modes via the keypad or the remote controller.
Able to detect rear camera via CAN or rear lamp cable.
Car-solutions.com

1.2 Features
www.car-solutions.com 4
800 x RGB x 480 24bit wide display of high definition
LED backlight device (600cd) – able to adjust brightness
Stereo sound support via headphone input
ZOOM Function ( 16:9 -> 4:3 )
Able to connect external video/audio device
Able to display original images at once ( Normal -> Zoom1 -> Zoom2 -> Zoom3 )
Car-solutions.com

1.3 System diagram
www.car-solutions.com 5
DISPLAY
(CAR MAIN BOARD)
A/V 1
NAVIGATION Input
(Analog RGB)
CVBS
(Rear camera)
Car Screen Input
A/V 2
A/V 3
VIDEO
CIRCUIT
VIDEO MUX
MCU
Power Input
(+8VDC ~ +18VDC)
POWER
CIRCUIT
Dip S/W
A/V OUT
HEADREST
MONITOR
Keypad Switch for source toggle
OEM Button (Can Intrface)
Car Installation
OEM LCD
Rear Camera
Car-solutions.com

1.4 Components
www.car-solutions.com 6
LCD cable * 1EA
A/V cable * 1EA
Mode cable * 1EA IR cable * 1EA
REAR CAMERA POWER cable * 1EA
Modified POWER cable (7P) * 1EA
Remote control * 1ea
RGB cable * 1ea
Car-solutions.com

1.5 Exterior
www.car-solutions.com 7
①POWER
②RGB(IN)
③REAR CAMERA POWER
④A/V(IN/OUT)
⑤LCD-OUT
⑥LCD-IN
⑦IR
⑧MODE
⑨LED
⑩DIP switch
Dimension
Horizontal length 164.4mm
Vertical length 94.4mm
Height 28.2mm
①②③④
⑤⑥⑦⑧⑨⑩
Car-solutions.com

1.6 POWER cable
www.car-solutions.com 8
NOISE FILTER BOX This has to be connected
to the spot located at the
back of the monitor which
the original power & CAN
cable originally connected.
The original power&
CAN cable has to be
connected to this
part.
Approximately 1M
GND
ACC
CAN(L)
CAN(H)
Noise
filter box
Approximately 15cm
Car-solutions.com

2.1 DIP switch
www.car-solutions.com 9
PIN
Function
Dip S/W Selection
1 Displaying RGB input ON : displaying RGB mode
OFF : hiding RGB mode
2 Displaying A/V 1 ON : displaying A/V 1
OFF : hiding A/V1
3 Displaying A/V 2 ON : displaying A/V 2
OFF : hiding A/V2
4 Displaying A/V 3 ON : displaying A/V 3
OFF : hiding A/V3
5 Setup of monitor size ON : 7.2”
OFF : 10.2”
6 Unavailable
7 Setup of rear camera use ON : CVBS4
OFF : MAIN
8 Setup of original screen
display
ON : By MUX
OFF : By Relay
( ON : DEFAULT )
※ON : DOWN / OFF : UP
default : ON (DIP #8)
※ DIP S/W usage example
- Input Mode : A/V2, A/V3
- Original Navigation
- External rear camera
▷DIP S/W : 1,2 ON (hiding INPUT MODE)
▷DIP S/W : 3 OFF (displaying A/V2)
▷DIP S/W : 4 OFF (displaying A/V3)
▷DIP S/W : 5,6 OFF
▷DIP S/W : 7 ON (for external rear camera)
▷DIP S/W : 8 OFF
Car-solutions.com

2.2 Setup for car model & navigation
www.car-solutions.com 10
FACTORY mode – Press ◀button 2 seconds long on the remote controller.
UTIL - CAR MODEL
Selecting model of the car
MINI : mini cooper, cars coming
after the year 2011
F10 : series 5, cars coming after
the year 2010
F01 : series 7, cars coming with
round connector
E90 : series 3, X series, cars coming
after the year 2010
* Set pin#5 of DIP switch to the right
size of the monitor after selecting
model of the car. (Refer to page9.)
UTIL – NAVI MODEL
Definition of the navigation
DEFAULT : default, 400X234, low
definition
KD-900(WVGA) : 800x480 in high
definition, for Chinese
MD7000(WVGA) : 800x480 in high
definition, for domestic use
MYVI(WVGA) : 800x480 in high
definition
* Go into FACTORY/ IMAGE (as shown
right) and adjust the position and the
size of the navigation after setting the
definition of the navigation.
IMAGE
Adjusting the position and the size
of navigation
H-POSITION : moving in horizontal
direction (applicable in 7” models)
V-POSITION : moving in vertical
direction (applicable in 7” models)
H-SIZE : adjusting the horizontal
size of the navigation
Setup for car model Setup for navigation
Car-solutions.com

2.3.1 FACTORY mode
www.car-solutions.com 11
UTIL- DMB SKIP
For domestic use only
ON : deactivating DMB
OFF : activating DMB
UTIL - A/V SELECT
Selecting background sound while
navigation is displayed on the screen
DEFAULT : default, the sound of
previous image before displaying
navigation
DMB : sound of DMB
A/V : sound of A/V source
UTIL - FACTORY RESET
Resetting factory mode
YES : resetting factory mode
NO : undoing reset of the factory
mode
FACTORY mode – Press ◀button 2 seconds long on the remote controller.
Car-solutions.com

2.3.2 FACTORY mode
www.car-solutions.com 12
I_DRV - I_DRV REMOTE
Selecting model of navigation and
DMB respectively to control I_DRV
function
ML 740T
ARION
PANASONIC
HSD100
COMTEC
NET770
PIONEER
ML100
•Selecting NAVIGATION model : in RGB
mode
•Selecting DVD model : in A/V mode
I_DRV/ I_DRV CONTROL
Selecting whether to use I_DRV
function or not
ON / OFF
FACTORY mode – Press ◀button 2 seconds long on the remote controller.
Car-solutions.com

2.4 Original buttons usage
www.car-solutions.com 13
I-Drive buttons
(whole model)
Steering wheel buttons (5series)
Hot Key Function
Mode
Key
Operation
Function
Whole
mode MENU
Press this button 2 seconds long Changing modes
Press this button short Getting back to Original
image
DMB
△
Press this button 2 seconds long in the direction of 12 O’clock Scanning channel
Press this button short in the direction of 12 O’clock Changing channel upward
▽Press this button short in the direction of 6 O’clock Changing channel
downward
AV1~3 ▽Press this button 2 seconds long in the direction of 6 O’clock Activating PIP function
Rear
camera ▽
Press this button 2 seconds long in the direction of 6 O’clock Activating PIP function
Press this button short in the direction of 6 O’clock Adjusting the position of
the transparent PDC image
Mode
Key
Operation
Function
Whole mode Circulation button Press 2 seconds long Activating PIP function
Whole mode Downward arrow button Press 2 seconds long Changing modes
Mode
Key
Operation
Function
Whole mode “1” button next to the radio button Press short Changing modes
Car-solutions.com

2.5 Remote controller usage
www.car-solutions.com 14
Key
Function
POWER & PIP Unavailable
MENU Activating OSD menu
OK Making a selection, changing image display
▲
Moving upward
(If you press this button 2 seconds long, “Hot key” function will
activate/ deactivate.)
▼Moving downward
◀
Moving leftward
(If you press this button 2 seconds long, you can get access to the
factory mode.)
▶
Moving rightward
(If you press this button 2 seconds long, you can reset all the data
about user environment.)
What is Hot Key function ?
You can use this function via pressing number “1” button next to the radio button. You can change audio source to the external
AUX with this function. (original function of BMW) Our device let it change to an external video source for driver to use this
function via this button. So, you can change sources (audio<->video) by pressing this button without any other install process.
Car-solutions.com

2.6 Keypad usage
www.car-solutions.com 15
Select one between the remote controller and the keypad
FACTORY MODE (Interface setting) :
Press these buttons on OSD keypad in the following sequence; UP→DOWN→UP →MENU
Key
Function
MENU/EXIT Activating OSD menu and Getting back to the previous state after setting mode
SEL/INPUT Making a selection and hanging modes
UP Moving leftward or upward (If you press this button 2 seconds long, you can get access
to HOT KEY function.)
DOWN Moving rightward or downward (IF you press this button 2 seconds long, you can reset
all data.)
Car-solutions.com

2.7.1 Setup for rear view camera
www.car-solutions.com 16
UTIL - REAR SELECT
Selecting how to detect the rear view
camera
LAMP : Detecting the rear view
camera via rear lamp (Installer must
connect “Rear-C” cable of the power
cable to the rear lamp of the car.)
CAN : Detecting the rear view camera
via CAN signal (Installer must connect
“CAN” cable of the power cable to the
“CAN” cable of the car.)
•On installing rear view camera : Pull down
DIP switch pin#7 to set it as “ON”. (Refer
to page9.)
PARK
PARK ENABLE : Selecting whether to display the parking guide line or not
on rear gear (default : ON)
PARK SETUP : Adjusting the position of the parking guide line (available
in PARK SETUP -> V-POSITION, H-POSITION)
SAFE ENABLE : If your car is connected with CAN cable and it is in ”ON”
state, you can NOT watch DVD or A/V except original image or
navigation while driving. At that time the screen get back to the main
(default : OFF)
a. If you want to get to the FACTORY mode, set the gear as rear state
and press “LEFT” button 2 seconds long on the remote controller or
the keypad. (as shown left top)
b. If you set ‘PARK ENABLE’ as “ON” state, there will be the rear view
parking guide line. (as shown right top)
FACTORY mode – Press ◀button 2 seconds long on the remote controller.
Car-solutions.com

2.7.2 Setup for rear view camera
www.car-solutions.com 17
< whole PDC screen : F10, E90, F01 > < full rear view on screen : F10, E90, F01 >
< DUAL screen : E90, F01 > < DUAL screen2 : F10, E90, F01 >
Positioning transparent PDC image
Press button on the steering wheel and select a
position of PDC image among 3 options as shown
below.
•The types of PIP function in rear view mode can differ
from along car models. And the 7” screen is provided
by full screen of camera and original PDC image.
* Available in F01 and E09 after the year 2009
Setup for displaying rear view
series5 : Press button on the steering
wheel and select one from 4 options as
shown below.
series7 : Press button about 2 seconds
long on I-Drive and select one among
4 options.
Car-solutions.com

2.8.1 OSD (on screen display)
www.car-solutions.com 18
Analog RGB Mode
OSD
LANGUAGE : Choosing
interface language while
changing mode between
A/V and DVD
TRANS : Adjusting
transparency of OSD
H_POSITION, V_POSITION :
Positioning OSD menu
IMAGE
BRIGHTNESS
CONTRAST
SHARPNESS
USER IMAGE : Selecting one
among 4 color options.
COLOR
RED : Adjusting red
GREEN : Adjusting green
BLUE : Adjusting blue
USER COLOR : Selecting a
color option among set
color options
UTIL
FACTORY RESET : Resetting
all the data about the
relevant mode
(applicable to navigation,
A/V, DMB, rear mode
respectively)
Car-solutions.com

2.8.2 OSD (on screen display)
www.car-solutions.com 19
Video mode
DMB mode (only for domestic use)
UTIL
FACTORY RESET : Resetting all the
data about the relevant mode
(applicable to navigation, A/V, DMB,
rear mode respectively)
OSD
LANGUAGE : Choosing interface
language while changing mode
between A/V and DVD
TRANS : Adjusting transparency of
OSD
H_POSITION, V_POSITION :
Positioning OSD menu
IMAGE
BRIGHTNESS
CONTRAST
SHARPNESS
USER IMAGE : Selecting one among 4
color options
Car-solutions.com

3.1 Installation diagram
www.car-solutions.com 20
Original LCD cable
Control box
Offered LCD cable
www.car-solutions.com 20
Original
Monitor
AV1 AV2 AV3
REAR C
Audio L
Audio R
AV/OUT Video
R DATA (red) G DATA (green)
B DATA (blue)
NAVI
SYNC (white)
GND (black)
DVD
GND
ACC
CAN CAN
Noise
filter box
Connecting the original POWER & CAN cable to this part.
Connecting this to the spot which the original POWER & CAN cable was connected.
REAR (12V OUT)
GND
Car-solutions.com