Car Solutions QCPASS1581 User manual

Installation Manual
Multimedia Interface
for HondaAccord/Odyssey 2018-
[email protected]
car-solutions.com
car-solutions.com

Specification
Compatibility: Honda Accord/Odyssey
2018~
Interface Input / Output specifications
Input : LVDS IN (Car System) *1
LVDS *1
H D M I * 1
CVBS (Front Camera) *1
CVBS (Rear Camera) *1
Output : LVDS OUT (Car System) *1
AUD I O OU T * 1
Power Spec:
Input Power: 8VDC ~ 18VDC
Consumption: 5WATT
Switch input mode:
1. External video sources skip function: Able to control input videos on and off
via Dip switches
2. Able to switch videos via the remote and button switch
3. Able to detect the rear view camera by CAN or rear lamp cable
* Support Multi-Touch
2
[email protected]
car-solutions.com
car-solutions.com

Components
Main Board
QCPASS1581
Power Cable
HPOWER0267
Accord J By J Cable
HARETC0371
LCD Cable
HLCDCA0067
HLCDCA0068
Remote CTRL.
REMOTE0001
Multi Cable
HARETC0363
Button Cable
HARETC0001
IR Cable
H I R C AB 0002
UART Cable
HTOUCH0015
3
[email protected]
car-solutions.com
car-solutions.com

Odyssey Jack by Jack Cable Option
OPTION
Odyssey J By J Cable
HARETC0372
Components with Options
4
[email protected]
car-solutions.com
car-solutions.com

DIP Switch Settings
* ON: DOWN / OFF: UP
Please make sure to disconnect the power cable
of interface and reconnect to apply dip switch
setting whenever changing DIP switch.
PIN
FUNCTION
Dip S/W SELECT
1
LVDS
OFF : LVDS Mode
ON : LVDS Mode Skip
2
H D M I
OF F : H D M I M o de
ON : H D M I M o de Ski p
3
Front Camera
OFF : Ext. Front Camera Mode
ON : OEM Front Camera Mode
4
No Use (OFF)
5
Car Model
5 OFF, 6 OFF : Accord
5 ON, 6 OFF : Odyssey
5 OFF, 6 ON : CRV
6
7
Rear Camera
OFF : OEM Rear Camera Mode
ON : Ext. Rear Camera Mode
8
MUST SET TO ON.
5
[email protected]
car-solutions.com
car-solutions.com

Remote Control
Key
FUNCTION
POWER & PIP
N/C
MENU
Activating OSD menu
OK
Making a selection, changing image display
▲
Moving upward
▼
Moving downward
◀
Moving leftward
(If you press this button 2 seconds long, you can access the
factory mode)
▶
Moving rightward
(If you press this button 2 seconds long, you can reset all the
data about user environment)
6
[email protected]
car-solutions.com
car-solutions.com

IMAGE
PARK
FUNC
UTIL
INFO
PAS TYPE : PAS ON
PAS SETUP
REAR TYPE : CAN
RADAR FUNC : OFF
Factory Settings
IMAGE
Setting for image display
PARK
PAS TYPE:
Select parking line type.
NOT USED: Do not use parking line
PAS ON: No Use
PAS OFF: Use fixed parking line
PAS SETUP:
Move the position of parking line.
REAR TYPE:
Choose rear camera recognition.
CAN : D et ec t i ng t he rea r v i ew c a mera by C AN si gn a l . ( I nst a ll er mu st c o nnec t
“CAN” cable of the power cable to the “CAN” cable of the car)
LAMP : D et ec t ing t he rea r v i ew c a mera v i a “G rey R ear ” wi re. ( I nst a ll er mu st
connect “Rear-C” cable of the power cable to the rear lamp of the car)
RADAR FUNC:
Enable radar senor pop-up function.
7
IMAGE
PARK
FUNC
BRIGHTNESS
UTIL
INFO
SHARPNESS
CONTRAST
SATURATION
HUE
[email protected]
car-solutions.com
car-solutions.com

Factory Settings
FUNCTION
CAR MODEL:
Auto detect (no selection)
AUTO FCAM:
Front Camera Display Setting
LVDS MODEL:
CarPlay, Navigation Model Setting
HD1 MODEL:
DTV, Navigation Model Setting
UTIL
RESET ALL:
Factory mode reset (YES/NO)
INFO
System version information
8
IMAGE
PARK
FUNC
CAR MODEL : Odyssey
AUTO FCAM : OFF
LVDS MODEL : QX-720P
UTIL
INFO
HD1 MODEL : SUNE10
IMAGE
PARK
FUNC
UTIL
INFO
RESET ALL : NO
IMAGE
PARK
FUNC
UTIL
SUB : 210709
INFO
INFORMATION
SW : 210709
HW : V1.2
[email protected]
car-solutions.com
car-solutions.com

HDMI IN *1
Rear Camera IN *1
Front Camera IN *1
Audio OUT *1
Power/CAN
No
Use
T/S OUT Pin#2 is
UART-TX for
UART Touch
OEM
Command
OEM
Monitor
Installation Diagram
Supplied LCD Cable
with Male
Connector
OEM LCD Cable
Supplied LCD Cable
with Female
Connector
CARPLAY
Or Android
BOX
* Please refer to the next page for Power/CAN Cable connection.
9
[email protected]
car-solutions.com
car-solutions.com

LCD Cable Connection
1. Please unplug the below highlighted OEM LCD cable from monitor.
2. C o nnec t pro v i ded LC D f emal e c o nnec t o r wi t h OE M LCD c o nnec t o r a nd I nterf a c e
OEM IN port.
3. Connect provided LCD male connector to the monitor and interface OEM OUT
port.
Accord
Odyssey
OEM
Command
Supplied LCD Cable
with Male
Connector
OEM LCD Cable
Supplied LCD Cable
with Female
Connector
10
OEM
Monitor
[email protected]
car-solutions.com
car-solutions.com

1. Please unplug above highlighted OEM Power/CAN cable from the
head unit.
2. Plug in OEM Power/CAN connector to the provided Jack by Jack
female connector.
3. Plug in provided Jack by Jack male connector to the head unit.
Power/CAN Cable Connection_ Accord
11
[email protected]
car-solutions.com
car-solutions.com

Please unplug above highlighted OEM Power/CAN cable from the
Instrument monitor.
Plug in OEM Power/CAN connector to the provided Jack by Jack female
connector.
Power/CAN Cable Connection_ Odyssey
1.
2.
3. Plug in provided Jack by Jack male connector to the instrument monitor.
12
[email protected]
car-solutions.com
car-solutions.com

OEM Button Activation_ Accord
* Please long press below button for mode change.
13
[email protected]
car-solutions.com
car-solutions.com

OEM Button Activation_ Odyssey
* Please long press below button for mode change.
14
[email protected]
car-solutions.com
car-solutions.com

Multi Cable Drawing
15
[email protected]
car-solutions.com
car-solutions.com

Power Cable Drawing
16
[email protected]
car-solutions.com
car-solutions.com

Cautions Before Installation
1. Ignition key should be taken off before starting installation, interface
power connection must be the last step in installation.
2. Power cable should be separated when connecting interface.
3. Should be no any electronic devices or magnetic pole around
installation place.
4. All steps of installation should be done by well-trained specialist.
5. Dismantling without manufacturer’s permission cannot be guaranteed,
(No permission to break attached label on the board.)
6. Kindly check all parts are in the box, when receiving the product, if
anything missing, inform to the supplier or manufacturer.
7. According to our sales policy, any problems caused by user’s mistake,
careless cannot be guaranteed.
17
[email protected]
car-solutions.com
car-solutions.com

Trouble Shooting
Q. I cannot change mode
A. Check connection of Ground cable and IR Cable. Check LED lamp is on, if not
check connection of POWER cable.
Q. All I got on the screen is black.
A. Check second LED lamp of the interface is on, if not, check A/V sources
connected are working well. (Second lamp indicates AV sources connected works
well) Check interface connection has been done well.
Q. Displayed image color is not proper (too dark or unsuitable color)
A. Press ▶button on the remote control for 2 seconds and check how it goes, if it
does not work, inform to manufacturer.
Q. I cannot watch the rear camera on the screen
A. Set the DIP switch #7 as state “ON”.
Q. Set mode not appear
A. Check DIP Switch.
Q. OEM image is not displayed.
A. Check interface’s LCD In/Out cable connection. If the status keeps on, inform to
manufacturer.
Q. Screen only displays white color.
A. Check LCD out cable is connected well, if this status keeps, inform to
manufacturer.
Q. If no image is shown on screen after connecting CAN wire with Park gear.
A. Go on the “FACTORY MODE”, check “UTIL-Rear Select”. If “LAMP”, change the
setting as “CAN” with the remote control. (* when connecting Rear-C wire of LAMP
power cable to Backup lights, Setting should be like this / CAN : if controlling rear
camera with CAN wire)
18
[email protected]
car-solutions.com
car-solutions.com