CAS HS-1 User manual

HS-1
Hanging Scale
OWNER’S MANUAL

CONTENTS
PRECAUTIONS 4
PREFACE 6
NAMES AND FUNCTIONS 6
HOW TO ASSEMBLE THE KEYBOARD 8
HOW TO ASSEMBLE THE TRAY 9
OPERATIONS 10
1. General Weighing 10
2. Weighing with the Tare 10
3. Add up Sales 11
4. Calling the Added Total Price 13
5. Saving a PLU to Memory 14
6. How to Call a PLU 15
7. THE OPERATIONS 17
ERROR MESSAGES 18
SPECIFICATIONS 18
SPECIFICATIONS FOR CE MARKING 19

45
PRECAUTIONS
Keep the scale away from strong EMI noises may cause incorrect weight
readings.
Do not subject the scale to sudden
temperature changes.
Place the scale on a flat and stable
surface.
Do not subject the scale to sudden
shocks. This scale must be installed in a dry and liquid free environment.
Do not subject the scale to direct sunlight.
Make sure that you plug your scale into the proper power outlet.
Plug into a power outlet 10 minutes before operations.

7
6
PREFACE
NAMES AND FUNCTIONS
Thank you for purchasing our CAS HS Series.
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your specialty departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have proper reliability.
This manual will help you with proper operation and care of the HS Series.
Please keep it handy for future reference.
OVERALL VIEW
PLATTER
DISPLAY
KEYBOARD
HOOK
DISPLAY & KEYBOARD
KEY FUNCTIONS
~
0
00
9
C
MR
M1
MW
ZERO
TTP
CALL
TARE
Used to enter all the numerical data.
Used to enter a double zeros.
Used to clear all the numerics on the unit price display.
Used to clear sum total price.
PLU memory key.
Used to call a total price of add up transactions.
Used to call an indirect PLU(Price Look Up).
Used to save the PLU(Price Look Up) to memory.
Used to correct the zero point.
Used to enter a tare weight.
Used to delete a tare weight.
KEYS FUNCTIONS
TOTAL PRICE
WEIGHT
UNIT PRICE
$
kg
$kg
ZERO
NET
MODEL: HS-1
X
CAPACITY : 15 0.005kg
M1 MRMW ADD
TARE
TTP
CALL
ZERO
ON
OFF

9
8
ADD
ON
OFF
Used to add a transaction.
Turns on and off the displays.
KEYS FUNCTIONS
Insert the screw( ) into the hole( ), then attach the holder( ) to the wall.
Insert the screw( ) into the hole( ), then connect to the hole( ).(see fig.)
2
1
4
6
5
3
Insert the screw( ) into the hole( ), then connect to the tapping of the platter
wire rod( ).
Insert the screw( ) into the tapping of the platter wire rod( ), then connect
to hole( ).
Insert the screw( ) into the hole of the platter( ) then connect to wing
nut( ).(see fig.)
NOTE : : M4 P0.7 10(SUS)
: M4 P0.7 12(SUS)
: M4 P0.7 10(SUS)
2
51
7
4
3
6
8
HOW TO ASSEMBLE THE KEYBOARD
HOW TO ASSEMBLE THE PLATTER

11
10
OPERATIONS
1. General Weighing
1 2 7 5
Enter a unit price. Place the commodity
on the platter. Remove the commodity from the platter.
TARE 2 9 9
Place the container on
the platter. Press TARE key. Enter a unit price.
NOTE: The unit price is cleared automatically after an each weighing.
2. Weighing with the Tare
Tare is the weight of a container being used for a commodity.
The TARE key subtracts the weight of the container.
3 1 5 ADD
Place the commodity on
the platter. Remove the commodity from the platter. Remove the container.
NOTE: The tare is cleared automatically after an each weighing.
Not all the countries are applicable with this tare clear.
3. Add up Sales
This add up function helps you when the customer wants to buy several
commodities.
You can see the added total price by pressing TTP CALL key.
When the transaction is completed you can delete the added total price by
pressing C key.
Enter a unit price. Place the commodity
on the platter. Press ADD key.

13
12
2 7 5
ADD
Remove the commodity
from the platter. Enter a another unit price.
Press ADD key. Remove the commodity
from the platter.
Place the commodity on
the platter.
NOTE: You can add-up items up to 99 times or $ 9999.99 in this manner.
Otherwise, you will hear a beep sound.
4. Calling the Added Total Price
When you press the TTP-CALL key without using the add-up function, you will
hear a beep sound.
Confirm the added total price only.
How to delete the added price after confirmation.
TTP
CALL TTP CALL
Press TTP CALL key. Press TTP CALL key again.
TTP
CALL C
Press TTP CALL key. Press C key.

15
14
5. Saving a PLU to Memory
The PLU means Price Look Up and which has a unit price.
This function stores each PLU into a internal back up memories.
This scale has 1 memory of direct PLU and 199 memories of indirect PLUs.
A) For Direct PLU Key
B) For Indirect PLUs
2 9 9 MW M1
Enter a unit price. Press MW key. Press M1 key.
3 7 5 MW 1 0
Enter a unit price. Press MW key. Enter a desired address of
the PLU.
MW
Press MW key.
6. How to Call a PLU
When you call a PLU, the platter should be empty.
A) For Direct PLU Key
M1
Press M1 key. Place the commodity on
the platter. Remove the commodity from the platter.

17
16
B) For Indirect PLUs
1 0 MR
Enter an address of the
indirect PLU.
Remove the commodity
from the platter.
Press MR key. Place the commodity on
the platter.
Ib mode : If you want to use this mode, please do the followings.
Now, you are in the kg mode.
Press the kg / Ib key. The weight display should
read "pound" and remain
this way for about 2 seconds.
The weight display should
read "0.00" automaticaly.
Now, you are in the Ib mode.
kg mode : If you want to use this mode, please do the followings.
Make sure that Ib lamp should be on.
Make sure that Ib lamp should be on.
Now, you are in the Ib mode.
Press the kg / Ib key. The weight display should read "nEtrc" and remain
this way for about 2 seconds.
The weight display should
read "0.00" automatically.
Now, you are in the kg mode.
NOTE: While set an address of the PLU, a decimal point of the unit price display
has no meaning.
7.THE OPERATIONS
CHOOSE THE Ib OR kg MODE
WARNING : When you change the kg/Ib mode, avoid leaving any
item or items on the platter.

18 19
ERROR MESSAGES
To help the customer’s understanding, this scale warns the error messages
properly. Please refer to error table.
SPECIFICATIONS FOR CE MARKING
2. Electrical conditions for LVD(Low Voltage Directive) testing.
Power source : AC 220V ~ 240V 50Hz, 50mA, 10W
Insulation class : I
3. Environment Conditions for non-automatic weighing instrument.
This product is intended to be “indoor use”.
Altitude : less 2000m
Temperature range : -10 ~40
II
Pollution degree : II
4. Capacity : 6 0.002kg, 15 0.005kg, 30 0.01kg
5.The socket-outlet shall be installed near the equipment and shall be easily
accessible.
6. Do net pour water directly on the scale. Spray any cleaning liquids onto the
cloth rag you are using to wipe the scale clean.
7. Changes or modifications not expressly approved by manufacturer for
compliance cluld void the user’s authority to operate the equipment.
; Above statements can be applied to product with CE MARKING.
An error of the initial zero range
An over flow was occurred from
ADD key
An over flow of the transaction count
Failure of the analog module
Failure of the digital module
Condition codes are broken
Key codes are broken
Set the platter empty
Press C key
Press C key
Call your CAS dealer
Call your CAS dealer
Call your CAS dealer for span calibration
Call your CAS dealer for span calibration
ERROR REASONS SOLUTIONS
Err 1
Err 6
Err 8
Err 10
Err 11
Err 12
Err 13
SPECIFICATIONS
MODEL
CAPACITY
DISPLAYS:
WEIGHT
UNIT PRICE
TOTAL PRICE
DISPLAY DESIGNATORS
MAXIMUM TARE
POWER SOURCE
POWER CONSUMPTION
TEMPERATURE RANGE
DIMENSIONS(mm)
PRODUCT WEIGHT
HS-1
60.002kg 15 0.005kg 30 0.01kg
Vacuum Fluorescent Display
6 DIGITS or 7 DIGITS
5 DIGITS
6 DIGITS
ZERO, NET
-6.000kg -9.995kg -9.990kg
AC 110/120/220/240V, 50/60Hz
APPROX. 10W
10°C 40°C
260(W) 110(D) 368(H)
3.6kg
1. Symbol Description