CAS WEIGHING SOLUTION SWII PLUS Series User manual

2

3
PRECAUTIONS 4
PREFACE 6
NAMES AND FUNCTIONS 6
OPERATIONS 8
1. Simple Weighing Mode 8
2. Weighing with Tare 8
3. Changing Unit of Weight 9
4. Hold Function 9
5. Comparator Function 10
6. Counting Function 11
7. Setup Mode 14
BATTERY MAINTENACE 15
ERROR MESSAGE 15
SPECIFICATIONS 16

4

5

6
Thank you for purchasing CAS SWΙΙ PLUS series.
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your special departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have proper reliability.
This manual will help you with proper operation and care of the SWΙΙ-W.
Please keep it handy for future reference.
NAMES AND FUNCTIONS
OVERALL VIEW

7
DISPLAY & KEYBOARD
KEY FUNCTIONS
KEYS FUNCTIONS
Used to set the zero point.
Used to convert the unit of weight.
(If you press the button long time, Unit is converted)
Used to input or cancel the weight of tare.
Used to make the weight of commodity stable.
This weight is average value.
Used to change the unit of weight, and shown as following sequence
on the display. [Kg] [WL on or off] [PCS] [Kg]
(If you press the button long time, Mode is changed)
Used to turn on and off the scale.

8
●Turn on the scale by pressing key. Then, the display will show all the
segments and count up "0" to "9". You may stop this automatic counting by
pressing the key.
●When you turn on the display, make sure that platter is empty. Otherwise,
display will show "Err 1", an error of initial zero range. Please refer to "ERROR
MESSAGE" section for more information on page15.
●When the weight becomes stable the display shows the stable sign ( ) on.
●You may need to make it "0.000" by pressing key unless the display
indicate "0.000" under the empty platter.
1. Simple Weighing Mode
①Place a commodity on the platter.
②Remove the commodity from the platter.
2. Weighing with Tare
●TARE means the weight of container being used for a commodity.
●TARE key function is to subtract the weight of the container from full weight loaded
Place a container on①the platter.

9
②Press the key.
③Place a commodity into the container, then
the display will show only the weight of the
commodity.
④Remove container and commodity, then the
display will show the weight of the container
with "-" symbol.
⑤Press the key, then display will
show the "0.000".
3. Changing Unit of Weight
●Press the key a few seconds.
You may select kg, or g as the unit of weight.
4. Hold Function
①When the weight is unstable, press the
key
②Then "HOLD" will be displayed twice
③Then average value will be show twice And
the "HOLD" function will be removed
automatically

10
5. Comparator Function - HI / LOW Limit Setting
①Press the key until the display
shows "WL OFF" (Press the key for a
few second). "WL OFF" means that
comparator function is not activated..
②Press key to activate this function.
The display shows "WL ON".
③Press key once to set up the low
limit. The display shows "0.000" and the first
number flashes..
④Press the key to have number
increase. To move flash to next digit, press
the key.
⑤Press key to set up HIGH limit. The
display shows "2.000" and you can change
these numbers by pressing key.
If you want to move to next digit you can go by
pressing key.
⑥If you set up HIGH limit you can go out by
pressing key, and "End" message on
the display.
⑦If you set up HIGH limit and LOW limit incorrectly, "Err" will be shown on the display. Then
you may need to set it up again. For example, setting LOW LIMIT=2.990 kg and HIGH
LIMIT=1.990 kg this is incorrect setting because HIGH limit is lower than the LOW limit. When
HIGH and LOW limit are set as the same or above maximum capacity it still shows "Err"
message.

11
⑧If you want to go back to the simple
weighing mode just press key twice.
(Press the key for a few second).
⑨Suppose that the HIGH limit and LOW limit
are set up as 2.990kg and 1,990kg
respectively.
If the weight loaded is 2kg between HIGH and
LOW limit the display shows "OK" and the
scale continues to beep slowly.
If the weight loaded is above 2.990kg, HIGH
limit, the scale continues to beep rapidly.
6. Counting Function
●Counting without Tare
①Initial display as above.
②Press key twice to go to sample unit
selection mode. (Press the key for a
few second)
③Press key to select the number of
sample unit. You can select 10, 20, 50, 100,
200, or 500 as a sample unit.
④If you select "P_10" as a sample unit, then
please put 10 sample units on the scale.
Then press key to set sample units.
⑤Put all of commodities you wish to count,
and then check the number of pieces on
display.

12
⑥Remove all of commodities from the scale.
●Counting with Tare
①Press key twice to go to sample unit
selection mode. "PCS" is shown on the
display, then press key to select
the number of sample unit.
②Put the container on the scale and press
key to set weight of tare.You can select
10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 200,
300, 400 or 500 as a sample unit, by pressing
key.
③If the number of selected sample unit is 20,
please put 20 sample units on the scale.
Then press key to set unit weight.
④Put all of commodities you wish to count,
and then count the number on display.
⑤Remove all of commodities from the scale.
⑥Remove the tare from the platter.

13
⑦Press "Tare" key to exit from tare function.
⑧When you try to set the number of sample
unit at the ③stage, the display may show
"LACK" message shortly.
The result of counting may be incorrect in the
following cases.
a. unit weight ≤1/2 e *
b. weight loaded ≤2% of maximum weighing
capacity.

14
7. Setup Mode
Make sure that power is OFF. While pressing the key, press the key. The display shows “U
SEt”. You can select each menu by pressing the key and change the setting by pressing the key.
If you press key, you can save current setting and go next mode.
●Set up Mode Table
MENU DISPLAY DESCRIPTIONS
Do not use Auto Power Off function.
Power turns to be off automatically when the scale is not in operation
over for 10 minutes.
Power turns to be off automatically when the scale is not in operation
over for 30 minutes.
Auto
Power Off
Power turns to be off automatically when the scale is not in operation
over for 60 minutes.
Sleep mode is deactivated.
Sleep mode is activated after 20 seconds.
Sleep mode is activated after 40 seconds.
Sleep Mode
Sleep mode is activated after 1 minute.
* "e" value may be various on capacity of product model.
Please refer to "SPECIFICATION" on page 16. For example, a product model which capacity is
3.000kg has 1g as "e" value

15
LOW BATTERY WARNING
When the battery is low the display shows the " " light on.
You should recharge battery using Adaptor.
When it is in use of " " light on, the scale may provide incorrect result on
measurement.
1. Battery recharging time : Approx. 20 hours
2. The charge lamp will not be turned off even if the battery is full.
Error
Message on
Display Description Solution
The "Err 0" occurs when scale is not
stable. Remove unstable facts.
The "Err 1" occurs when a current
zero point has shifted from the last
span calibration.
Please call your CAS dealer.
The "Err 3" is an overload error. Please remove the weight.
The "Err 9" is no weight error. When
scale is in counting mode, you must
load the weight.
If you have no weight on your scale,
you can see this error message.
Please load the weight on your
platter.

16
MODEL : SWΙΙ-W
Dual
Interval Single Dual
Interval Single Dual
Interval Single Dual
Interval Single
Capacity Max
1.5/3 kg
Max
3 kg
Max
3/6 kg
Max
6 kg
Max
6/15 kg
Max
15 kg
Max
15/30 kg
Max
30 kg
e e=0.5/1 g e=1 g e=1/2 g e=2 g e=2/5 g e=5 g e=5/10 g e=10 g
External
Resolution 1/3000
MAX Tare -1.4995 kg -3 kg -2.999 kg -6 kg -5.998 kg -15 kg -14.995 kg -30 kg
Display 51 x 19(mm, 3 Digit LED) x 2 EA 6 digit LED
Symbols STABLE, ZERO, TARE, g, kg, lb, oz, Low Battery
HI / OK / LO & PCS
Keys ZERO / UNIT, TARE, HOLD / MODE, POWER
Functions
Weighing, Hold, Unit Conversion,
Counting-Counting Sample Range : 10~100, 200, 300, 400, 500
Weight Comparison Function : hi, ok, low
Auto Power Off Function
Sleep Mode Function
Dimensions 256 (W) x 299 (D) x 117 (H)[mm] / 10.1(W) x 11.7 (D) x 4.6 (H)[inch]
Platter size 237.1 (W) x 192.1 (D)[mm] / 9.33 (W) x 7.56 (D)[inch]
Weight 2.5 kg
Power Pb 6 V 3.2 AH, 9 V / 1 A Adapter
Operation
Time Approx. 80 hours
Operating
Temperatur
e -10 °C ~ +40 °C / 14 °F ~ 104 °F
Minimum
Voltage
Level of The
Battery
About 5.6 V
Option 9 V / 1 A Waterproof Adaptor, Rear Display, Large Tray
※Notice: Specifications are subject to change for improvement without notice.

17

18

19

20