Circontrol eHOME BeON Parts list manual

eHOME BeON INSTRUCTION & INSTALLATION MANUAL
© CIRCONTROL
www.circontrol.com
1
The device (current transformer) is an optional device that can optimize the Electric Vehicle (EV) Charger.
It is the responsible to analyze the total current consumption in the residential, and to manage the
remaining current for the EV Charger, avoiding any tripping the Main Circuit Breaker (MCB) for
overconsumption.
BeON product range: 25 A for 5,75 kW / 30 A for 6,9 kW / 35 A for 8,05 kW / 40 A for 9,2 kW / 50 A for 11,5
kW / 63 A for 14,49 kW.
The eHOME BeON is connected after the Main Circuit Breaker (MCB) of the electric installation and before
the main loads distribution.
Only the authorised and qualified staff can
manipulate the electrical and electronic components.
Comply strictly with electrical safety regulations according to your country.
Do not make repairs or manipulations with the unit energised.
Only trained and qualified personnel should have access to low-voltage electrical parts.
Use only Circontrol supplied spare parts.
CONNECTIONS OF eHOME BeON

eHOME BeON INSTRUCTION & INSTALLATION MANUAL
© CIRCONTROL
www.circontrol.com
2
1. eHOME BeON Positive / Pin 2S2 (+)
2. eHOME BeON Negative / Pin 2S1 (-)
eHOME BeON
PRODUCT SPECIFICATION
Type Current Transformer
Ring Core Current Transformer
Material
Polyester
Dimensions
30 x 15 mm
Rated Insulation Level
0.72 / 3 /- kV
Connection
2S1 (-) / 2S2 (+)
Relation
25/0.05 A - 30/0.05 A - 35/0.05 A - 40/0.05 A - 50/0.5 A - 63/0.05 A
Accuracy
Class I
Direction of the current
P1↓
Index of Protection
IP20
NOTICE: Device available for the WallBox range: eHOME & eHOME + Series and eBasic Series