Cisco Tandberg 1700 MXP Assembly instructions

78-19991-01 1700 MXP Installation Sheet, March 2011 © 2011 Cisco Systems, Inc. All rights reserved.
Installation sheet 1700 MXP
Content of the box:
• The 1700 MXP unit
• Designers lens cap
• Remote control
• Installation sheet
• Country specic power cable
• Accessories box:
• 1 VGA - DVI cable (w/ audio)
• 1 LAN/Ethernet cable
• Power supply
• Batteries for the remote control
Tilt the display
manually to get a
better view angle.
The lens cap (privacy
cover) is held in
place by a magnet.
Tilt the camera
manually to make
it point at you.
Turn the ring to focus
the camera. To see
yourself, press the
Selfview key on the
remote control.
Headset recommendations
Standard PC headsets with 3.5 mm jacks
are compatible with the 1700 MXP. Having
a headset with microphone is optional.
See the user documentation for more
information about using a headset with
1700 MXP and for technical headset
recommendation.
Headset toggle button
Headset microphone
Headset out
DVI-I for PC
presentations
Connect the video
system to your LAN
Power
To let the PC and the
video system share a
single LAN connection,
connect your PC to the
LAN through the video
system.
Audio/Line in

78-19991-01 1700 MXP Installation Sheet, March 2011 © 2011 Cisco Systems, Inc. All rights reserved.
Installation sheet 1700 MXP
Getting started
The 1700 MXP turns on automatically when you power up the system. Use the
remote control to navigate in the menu.
Installation wizard
The Installation Wizard starts automatically when the video system is installed at
the rst time and guides you through the basic conguration of the system in the
following steps:
• Welcome page
• Select Language
• Enter System Name
• Enter Software Option Keys
• Enter IP Settings
• Obtain IP Address Automatically
• Static IP Address (address, subnet, gateway)
• Enter SIP Settings
• Enter External Management settings
• On: Enter information for your TMS server (address, path)
• O: Select from the list:
• Gatekeeper and enter the gatekeeper settings
• Call Manager and enter the call manager settings
• Direct
• Finish the wizard. The system will automatically restart the system.
The Installation Wizard can be run any time from the Control Panel menu.
User documentation
See the user documentation for more information: http://www.tandberg.com/docs
and http://www.cisco.com/go/telepresence/docs