Cisco TelePresence SX10 User manual

78-100213-01A0 | MARCH 2014 © 2014 Cisco Systems, Inc. All rights reserved.
Cisco TelePresence SX10 Quick Set
INSTALLATION GUIDE

This package contains:
• Cisco TelePresence SX10 Quick Set
• Cisco TelePresence TRC6 remote
control
• 2×AAA batteries
• Bracket for wall mounting
• HDMI monitor cable (2 m / 6.6ft)
• LAN cable (5 m / 16.4ft)
Optional accessories:
• VESA screen mounting kit
• VGA presentation cable (6m/19.7 ft)
• HDMI presentation cable (6 m /19.7ft)
• Cisco TelePresence Table
Microphone 20
• Power adapter and power cable
(1.8 m / 5.9ft)
User guides
For user guides and compliance and safety information for this product, go to:
www.cisco.com/go/sx-docs.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries.
To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are
the property of their respective owners. The use of the word partner does not imply a partnership relationship between
Cisco and any other company. (1110R)

SX10 wall mounting
Align the lens height with eye-level to ensure eye contact in video conferences.
TV depth Wall mount height
DH
<100 mm
<3.94 in.
110 mm
4.33 in.
100-130 mm
3.94 - 5.12 in.
130 mm
5.12 in.
130 - 150 mm
5.12 - 5.91 in.
150 mm
5.91 in.
150 - 170 mm
5.91- 6.69in.
170 mm
6.69 in.
170 -190 mm
6.69 - 7.48 in.
185 mm
7. 4 8 i n .
H
H
DD
83˚ FOV
+ 5˚ tilt
- 25˚ tilt
For more information on how to best set up a video conferencing room, please read
the video conferencing room design guides available at www.cisco.com/go/sx-docs
and visit the Project Workplace tool at www.cisco.com/go/projectworkplace.
NOTE: This type of equipment is to be installed by the submittor’s/dealer’s qualified
installer. Installer is responsible for obtaining safety inspection of the structural integrity
of the installation by the local authority/inspection department.
130cm-145 cm
4ft 3 in.- 4 ft9in.
83˚ FOV
+5˚ tilt
25˚ tilt

Ø 4 mm
1
3
Ø 4 mm
5
2
6
4
Ø 4 mm
1
3
Ø 4 mm
5
2
6
4

Power over Ethernet (PoE)
The PoE source (network switch or PoE injector) must be located in the same build-
ing as the SX10 device. The maximum cable length when connecting the SX10 to
a PoE source is 50 m / 164ft.
NOTE: Do not connect an external device to the USB port.
Connect the cables
1. Connect the SX10 to your monitor with the provided HDMI monitor cable.
2. Connect the LAN cable from the SX10 to an Ethernet wall plug. If Power over Ethernet
(PoE) is available, the SX10 is powered through this cable.
If the network does not support PoE, use the optional power adapter, or a PoE injector.
Monitor output,
HDMIEthernet/PoE
HDMI
Table microphone 20,
mini jack 3.5mm
External active
speakers,
mini jack 3.5mmVGA
USB
(For future use)Power
Presentation inputs
Factory reset pinhole,
Micro USB

Camera LED
Internal microphone,
and infrared sensor for
the remote control
Power button
and LED
Start the system
1. The SX10 starts up automatically when the power is connect. If it does not start
automatically, push the power button.
2.The power button’s LED lights up when the system starts up.
3.Follow the instructions on the on-screen wizard.
For further information on configuring your video system, download the Getting
Started Guide from www.cisco.com/go/sx-docs.
If there is a problem with the start up, the power button’s LED turns red. Please
contact support for assistance.
Monitor settings
To achieve the best possible synchronization of audio and video, check the monitor
settings.
• Choose the ‘Game Mode’ setting, if the monitor is equipped with it. It is specifically
designed to help reduce the response time and to reduce any delay.
• Switch off any additional audio processing effects, as these may lead to
nonsynchronized audio and video.

Optional: SX10 screen mounting with VESA bracket
M6/M8 M6/M8
M6/M8 M6/M8

M6/M8M6/M8
M6/M8M6/M8
1 2
3 4
5 6
8
7