Cisco Webex DX70 Service manual

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
1
Cisco Webex DX70 and DX80 Administrator Guide
Collaboration Endpoint software version 9.14
OCTOBER 2020
Administrator guide
for Cisco Webex DX70 and DX80
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices


D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
2
Cisco Webex DX70 and DX80 Administrator Guide
Table of contents
Introduction....................................................................................................................... 4
User documentation and software ....................................................................................... 5
What’s new ........................................................................................................................... 6
DX70 and DX80 at a glance ................................................................................................ 16
Power On and Off ................................................................................................................17
LED indicators ..................................................................................................................... 19
How to administer the video conferencing device ............................................................. 20
Configuration .................................................................................................................. 24
User administration ............................................................................................................. 25
Change the device passphrase .......................................................................................... 26
Restrict the access to the Settings menu........................................................................... 27
Device configuration ........................................................................................................... 28
Add a sign in banner ........................................................................................................... 29
Add a welcome banner....................................................................................................... 30
Manage the service certificates of the device ................................................................... 31
Manage the lists of trusted certificate authorities - CAs.................................................... 32
Set up secure audit logging ................................................................................................ 36
Delete CUCM trust lists....................................................................................................... 37
Change the persistency mode............................................................................................ 38
Set up ad hoc multipoint conferences................................................................................ 39
Set up Intelligent Proximity for content sharing ...................................................................41
Adjust the video quality to call rate ratio............................................................................. 46
Add corporate branding to the screen ............................................................................... 47
Add a custom wallpaper ..................................................................................................... 49
Choose a ringtone and set the ringtone volume ................................................................ 50
Manage the Favorites list .....................................................................................................51
Set up accessibility features............................................................................................... 52
Provisioning of product specific configurations from CUCM.............................................. 53
Peripherals...................................................................................................................... 55
Connect a computer ........................................................................................................... 56
Extend the number of input sources................................................................................... 57
Bluetooth headset............................................................................................................... 58
Connect the ISDN Link........................................................................................................ 59
Maintenance ................................................................................................................... 60
Installing new software ....................................................................................................... 61
Add option keys .................................................................................................................. 64
Device status ...................................................................................................................... 65
Thank you for choosing Cisco!
Your Cisco product has been designed to give you many
years of safe, reliable operation.
This part of the product documentation is aimed at
administrators working with the setup and configuration of
the video conferencing device.
Our main objective with this Administrator guide is to
address your goals and needs. Please let us know how
well we succeeded!
May we recommend that you visit the Cisco web site
regularly for updated versions of this guide.
The user documentation can be found on
► https://www.cisco.com/go/desk-docs
How to use this guide
The top menu bar and the entries in the Table of contents
are all hyperlinks. You can click on them to go to the topic.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices


D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
3
Cisco Webex DX70 and DX80 Administrator Guide
Run diagnostics................................................................................................................... 66
Download log files............................................................................................................... 67
Create a remote support user ............................................................................................ 68
Backup and restore configurations and custom elements ................................................. 69
CUCM provisioning of custom elements ............................................................................ 70
TMS provisioning of custom elements................................................................................ 71
Revert to the previously used software image ................................................................... 72
Factory reset the video conferencing device ..................................................................... 73
Capture user interface screenshots ................................................................................... 77
Device settings ............................................................................................................... 78
Overview of the device settings ......................................................................................... 79
Audio settings ..................................................................................................................... 84
Bluetooth settings ............................................................................................................... 86
Bookings settings................................................................................................................ 87
CallHistory settings ............................................................................................................. 88
Cameras settings................................................................................................................ 89
Conference settings ........................................................................................................... 90
FacilityService settings ....................................................................................................... 94
H323 settings...................................................................................................................... 95
HttpClient settings .............................................................................................................. 98
HttpFeedback settings........................................................................................................ 99
Logging settings ............................................................................................................... 100
Macros settings ................................................................................................................ 102
Network settings............................................................................................................... 103
NetworkPort settings ......................................................................................................... 111
NetworkServices settings..................................................................................................112
Peripherals settings .......................................................................................................... 120
Phonebook settings ...........................................................................................................121
Provisioning settings......................................................................................................... 123
Proximity settings.............................................................................................................. 126
RoomCleanup settings...................................................................................................... 128
RoomReset settings.......................................................................................................... 129
RTP settings...................................................................................................................... 130
Security settings ................................................................................................................131
SerialPort settings............................................................................................................. 134
SIP settings....................................................................................................................... 135
Standby settings ............................................................................................................... 140
SystemUnit settings...........................................................................................................141
Time settings .....................................................................................................................142
UserInterface settings....................................................................................................... 145
UserManagement settings.................................................................................................151
Video settings ................................................................................................................... 155
Webex settings ................................................................................................................. 162
Experimental settings ....................................................................................................... 163
Appendices................................................................................................................... 164
The user interface............................................................................................................. 165
Set up remote monitoring ................................................................................................. 166
Access call information and answer a call while using the web interface........................ 167
Place a call using the web interface ................................................................................. 168
Share content using the web interface..............................................................................170
Local layout control............................................................................................................171
Control a far end camera ...................................................................................................172
Customize the video conferencing device's user interface...............................................173
Customize the video conferencing device's behavior using macros ...............................175
Remove default buttons from the user interface ...............................................................176
Use of a third-party USB input device.............................................................................. 177
Sending HTTP(S) requests ...............................................................................................178
Manage startup scripts ......................................................................................................179
Access the device’s XML files ......................................................................................... 180
Execute API commands and configurations from the web interface ................................181
About Ethernet ports......................................................................................................... 182
Serial interface.................................................................................................................. 183
Open TCP ports ................................................................................................................ 184
HTTPFeedback address from TMS................................................................................... 185
Link an on-premises registered device to Cisco Webex Edge for Devices ..................... 186
Register a device to the Cisco Webex cloud service ....................................................... 187
Supported RFCs ............................................................................................................... 188
Calculating minimum bandwidth ....................................................................................... 189
Technical specification...................................................................................................... 190
User documentation on the Cisco web site...................................................................... 192
Cisco contacts .................................................................................................................. 193
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices


D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
4
Cisco Webex DX70 and DX80 Administrator Guide
Chapter 1
Introduction
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
5
Cisco Webex DX70 and DX80 Administrator Guide
Products covered in this guide
• Cisco TelePresence DX70
• Cisco TelePresence DX80
From Collaboration Software version 8.2 (CE8.2) all DX80
and DX70 units can run CE software, which is the same
software that runs on the Cisco TelePresence SX and MX
Series.
Note that Cisco DX650 is not, and will not be, supported
by CE software.
User documentation
This guide provides you with the information required to
administrate the video conferencing device.
The guide primarily addresses capabilities and
configurations of on-premise registered devices (CUCM,
VCS), but a sub-set of the capabilities and configurations
also applies to devices that are registered to our cloud
service (Cisco Webex).
Refer to the ► User documentation on the Cisco web site
appendix for more information about the guides for this
product.
Documentation on the Cisco web site
Visit the Cisco web site regularly for updated versions of
the guides:
► https://www.cisco.com/go/desk-docs
Documentation for cloud registered devices
For more information about devices that are registered to
the Cisco Webex cloud service, visit:
► https://help.webex.com
Cisco Project Workplace
Explore the Cisco Project Workplace to find inspiration
and guidelines when preparing an office or meeting room
for video conferencing:
► https://www.cisco.com/go/projectworkplace
Software
Download software for the endpoint from the Cisco web
site:
► https://software.cisco.com/download/home
We recommend reading the Software release notes
(CE9):
► https://www.cisco.com/c/en/us/support/
collaboration-endpoints/desktop-collaboration-
experience-dx600-series/tsd-products-support-
series-home.html
Converting to CE software
Until September 2016 DX80 and DX70 were shipped
with Android based software. Before converting to
CE software, it is important to carefully consider the
conversion requirements and the functionality changes
compared to Android based software; otherwise migration
can leave you with a non-functional deployment that
requires you to convert back.
Refer to the software release notes, and the ►Installing
new software chapter.
User documentation and software
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
6
Cisco Webex DX70 and DX80 Administrator Guide
This chapter provides an overview of the new and changed
device settings (configurations), and the new features and
improvements in CE9.14, CE9.13, and CE9.12 compared to the
previous version.
For more details, we recommend reading the Software release
notes:
► https://www.cisco.com/c/en/us/support/collaboration-
endpoints/desktop-collaboration-experience-dx600-series/tsd-
products-support-series-home.html
What’s new
New features and improvements in CE9.14
Web interface visual updates (All products)
The visual appearance of the web interface has
been enhanced. The new styles applied to buttons
and text input fields offer better overall support for
smaller/mobile devices, while maintaining the same
functionality.
Notifications now appear in the lower right corner of
the page.
Pin an important participant in CMS calls
(All products)
In a CMS meeting the host can pin a participant, who
is then always displayed to all other particpants, even
when he/she is not the active speaker.
Music Mode (All products)
If you activate the Music Mode feature, the
microphones can be used to capture a musical
performance while maintaining the echo cancellation
and background noise reduction capabilites in the
device. Music Mode is useful for remote music
lessons, testing musical instruments, and other
situations where music is important.
Music mode is automatically turned off when the call
ends, and the next call is optimized for speech.
Mouse and keyboard re-direct (Desk Pro)
The Desk Pro USB-C docking station capabilities have
been expanded with the addition of USB forwarding
support. This means you can connect a USB
keyboard and/or mouse to your Desk Pro, and use
them for your laptop.
Manual camera control (Desk Pro, Boards)
This new feature lets you make manual adjustments to
your camera position - like zooming, and turning off
the automatic framing feature - on the Desk Pro and
Boards.
Touch button changes
(CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55,
Room55Dual, Room70, Room70G2, RoomPanorama,
Room70Panorama, SX80, SX20, SX10, MX700, MX800, MX200G2,
MX300G2, DX80, DX70)
During out-of-call scenarios, the buttons shown
on the touch interface are now grouped on pages.
Instead of a ‘More’ button, small dots at the bottom of
the screen indicate that there are additional pages of
buttons. Swiping left or right changes the page.
During calls, you will still see the ‘More’ button and
tapping it will display the rest of the buttons in a
scrollable list.
Configurable web data and whiteboard
cleanup
(CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55,
Room55D, Room70, Room70G2, RoomPanorama,
Room70Panorama, DeskPro, Boards)
If you turn the configurable cleanup feature on,
devices will clean up web and whiteboard data at
midnight every day by default. The time of day set
for cleanup is user-definable and can be changed.
Turning the feature off restricts cleanup to a manual
procedure.
The whiteboard functionality is only available for Desk
Pro and Boards.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
7
Cisco Webex DX70 and DX80 Administrator Guide
Improved user interface for Wi-Fi setup
(CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55, Room55Dual,
Room70, Room70G2, RoomPanorama, Room70Panorama, DeskPro,
Boards, DX80, DX70)
On all devices that support a Wi-Fi connection, the
Wi-Fi setup interface has been improved to simplify
configuration.
Call details in the Recents list (All Products)
The data collected for recent calls, for example packet
loss and jitter, is now more readily available. You can
access this information directly from a device’s touch
interface by tapping the ‘Call’ button and selecting
‘Recents’.
Updates to Cisco Webex Edge for Devices
(All Products)
Enhancements for devices linked to Cisco Webex Edge
for Devices:
• Devices can join Microsoft Teams meetings either
using SIP via a Cloud Video Interop (CVI) gateway or
by running the Microsoft Teams meeting web app
(WebRTC).
• Devices can upload logs to the cloud, if enabled to do
so.
• The cloud device API now supports multi-line
commands.
Speaker Track View Limits
(CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55, Room55Dual,
Room70, Room70G2, RoomPanorama, Room70Panorama, Boards)
The View Limit feature allows you to exclude parts of a
room from view, thereby limiting the maximum camera
view (room overview) used for Speaker Tracking. The
feature has no effect on the view available for manual
camera control.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
8
Cisco Webex DX70 and DX80 Administrator Guide
New features and improvements in CE9.13
New products
• Cisco Webex Room Panorama
• Cisco Webex Room 70 Panorama
Support for Cisco Webex Control Hub
Configuration Management (All Products)
Cisco Webex Control Hub has been extended to
allow more control over devices that are registered on
premises and linked to Webex Edge for Devices. The new
configuration management feature, disabled by default,
will allow write-access to many device configurations.
This can be enabled through Control Hub.
Easy-join Webex Personal Meeting Rooms
(All Products)
Devices linked to Webex Edge for Devices can now
search directly for users in the Webex organization. A
button to join their Personal Meeting Room (PMR) will be
displayed in the search result next to the user’s name.
Real-time media metrics when joining Webex
meetings (All Products)
Devices linked to Webex Edge for Devices will be visible
in the media troubleshooting section in Control Hub in the
same way fully Webex registered devices are today. This
will make it easier to troubleshoot media quality issues.
In-call touch forwarding (Boards)
Touch forwarding has been enabled for use while in-call
and can be activated and deactivated using a floating
toolbar.
Support for virtual backgrounds (Desk Pro)
You can upload your own virtual backgrounds. Images are
uploaded via the web interface. You can then select from
one of the images via the GUI.
You can also use the content from an input device, such
as a computer, as a virtual background.
Far End Cameral Control when dialing into
CMS Meetings (All Products)
When you dial into a CMS meeting you can control the
camera of the active speaker. Just open the participant
list to find the button for “Remote Camera” control.
Note: If the active speaker is frequently changing from
person to person, it may be challenging to control the
camera of the intended participant. You cannot manually
select a specific participant for the FECC; it’s always the
current active speaker.
Custom text to video stream
(Codec Plus, Codec Pro, Room 70 G2, Room Kit, Room Kit Mini,
Room55Dual, Room 70)
You can add time, date, and/or a custom text string to a
video stream ( xCommand Video Graphics Text Display ).
You can add this text to the main video stream, the
presentation stream, or to the local video output.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
9
Cisco Webex DX70 and DX80 Administrator Guide
New features and improvements in CE9.12
New products
• Cisco Webex Room USB
• Cisco Webex Desk Pro
DX Series renamed to Desk Series
The new Desk Series contains the DX70, DX80, and Desk
Pro products.
Support for using Room Kit Mini with Samsung
Flip (Room Kit Mini)
The Room Kit Mini can be connected with a Samsung Flip
device to get a touch interface. Then, you can also use
the whiteboard feature. You can easily switch between
the Samsung Flip and the Room Kit Mini user interfaces
by pressing the Flip button.
One-way whiteboard sharing in-call (Boards)
You can now share the whiteboard while in-call. To initiate
this, click the Home button followed by the Whiteboard
button. Enter Editing mode and the sharing will begin.
To stop the whiteboard sharing, press the Done button,
followed by Stop sharing.
Note that the whiteboard share is one-way. Only
the device sharing the whiteboard can draw on the
whiteboard. Remote participants can only observe.
Webex Join support for Personal Meeting
Room IDs (All Products)
The Webex Join button now supports dialing Personal
Meeting Room (PMR) IDs. You can address them by
entering the full URL or a short path (i.e., username.
sitename); as well as, by entering the meeting number.
PMRs from your recent calls list will be suggested as you
type.
HTTP proxy support for Webex Edge for
Devices (All products)
HTTP Proxy support has been enhanced to include
devices linked to Webex Edge for Devices.
Webx Edge for Devices can select the HTTP Proxy
services for the HttpClient, HttpFeedback, and/or the
WebEngine.
If so enabled, all HTTP requests to the Webex Cloud will
use the configured HTTP Proxy. However, regardless of
the Proxy Mode, the device will never communicate with
the Cisco Unified Communication Manager (CUCM), MRA
(CUCM via Expressway), or TMS (phonebook) via proxy.
In addition, the following new settings allow you to enable/
disable use of the HTTP Proxy:
• HttpClient UseHttpProxy
• HttpFeedback UseHttpProxy
• WebEngine UseHttpProxy
Hide Proximity notifications (All products)
You can now hide the Proximity notifications. This
includes the Proximity icon that is visible on-screen when
someone is paired with Proximity and the notification that
appears when someone has just paired.
This can be configured via the API or the web interface of
the device, or it can be provisioned (e.g., via TMS).
Hide scheduled meeting titles (All products)
A setting has been added to hide/show the scheduled
meeting titles. When hidden, the words “Scheduled
meeting” will be displayed instead of the meeting
information.
Increased manual zoom range
(Room Kit Mini, Room Kit and Room 55)
The manual zoom range is increased from 2x (Room Kit
Mini)/ 3x (Room Kit, Room 55) to 5x. The automatic best
overview or speaker track zoom range is not changed.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
10
Cisco Webex DX70 and DX80 Administrator Guide
Improvements for the Call Control page in the
web interface of the device (All products)
• On a SpeakerTrack-enabled device, a button can be
used to alter the current SpeakerTrack status. Click
the button to disable or enable SpeakerTrack.
• The Mute button will correctly reflect the mute status
of the microphones.
• When a preset is selected and accepted by the video
device, it will be highlighted in blue. This includes
selection from other devices, such as the Touch 10
controller. Note that preset highlighting and detection
occurs only if the Camera Positions window is open.
• On devices where PresenterTrack is configured, it can
be enabled from the Camera Positions window.
• For cases where the main video consists of a
composited image of more than one input source, the
DefaultMainVideo source will be displayed. By default,
this is the main camera. This requires the remote
monitoring option key.
• Regarding the display of directory entries, recent
calls, and favorite entries, the maximum number that
can be displayed at one time is increased from 50 to
100. The search field can be used to narrow down the
list.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
11
Cisco Webex DX70 and DX80 Administrator Guide
Configuration changes in CE9.14
New xConfigurations
Bluetooth Allowed (Desk Pro)
Bluetooth Enabled (Desk Pro)
Bookings ProtocolPriority (All products)
Cameras Camera [1] Exposure Compensation Level (Desk Pro)
Provisioning CUCM CallManagementRecords CallDiagnostics (All products)
Renamed from Provisioning CUCM CallManagementRecords
RoomAnalytics AmbientNoiseEstimation Interval (CodecPro, CodecPlus, RoomKit, RoomKitMini,
Room55, Room55Dual, Room70, Room70G2, RoomPanorama, Room70Panorama, Desk Pro, Boards)
RoomCleanup AutoRun ContentType WebData (CodecPro, CodecPlus, RoomKit, RoomKitMini,
Room55, Room55Dual, Room70, Room70G2, RoomPanorama, Room70Panorama, Desk Pro, Boards)
RoomCleanup AutoRun ContentType Whiteboards (CodecPro, CodecPlus, RoomKit, RoomKitMini,
Room55, Room55Dual, Room70, Room70G2, RoomPanorama, Room70Panorama, Desk Pro, Boards, DX80, DX70)
RoomCleanup AutoRun HourOfDay (CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55,
Room55Dual, Room70, Room70G2, RoomPanorama, Room70Panorama, Desk Pro, Boards, DX80, DX70)
Standby BootAction (Boards)
Standby WakeupAction (Boards)
UserInterface Features Call MusicMode (All products)
Video DefaultLayoutFamily Local (Boards)
Video RememberLayout (All products)
Webex CloudProximity Mode (All products)
WebRTC EndCallTimeout (CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55, Room55Dual, Room70,
Room70G2, RoomPanorama, Room70Panorama, Desk Pro, Boards)
WebRTC InteractionMode (RoomKitMini, Desk Pro, Boards)
xConfigurations that are removed
Provisioning CUCM CallManagementRecords (All products)
Renamed to Provisioning CUCM CallManagementRecords CallDiagnostics
xConfigurations that are modified
Audio Output Line [1] OutputType (CodecPlus, RoomKit, Room55, Room55Dual, Room70)
Added to valuespace: Microphone
Bluetooth Allowed (DX70, DX80)
OLD: Access: public-api-preview
NEW: Access: public-api
Bluetooth Enabled (DX70, DX80)
OLD: Access: public-api-preview
NEW: Access: public-api
Cameras PresenterTrack Connector (CodecPro, Room70G2, RoomPanorama, Room70Panorama)
OLD: 6
NEW: 1
Logging CloudUpload Mode (All products)
OLD: Backend: All
NEW: Backend: On-prem
Peripherals Profile NetworkSwitches (Room 70 Panorama)
OLD: Default: 1
NEW: Default: NotSet
Standby BootAction (Desk Pro)
OLD: Default: DefaultCameraPosition
NEW: Default: RestoreCameraPosition
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
12
Cisco Webex DX70 and DX80 Administrator Guide
Time Zone (All products)
Added to valuespace: America/Nuuk, America/Punta_Arenas, Antarctica/Casey,
Antarctica/Davis, Antarctica/DumontDUrville, Antarctica/Macquarie, Antarctica/Mawson,
Antarctica/McMurdo, Antarctica/Palmer, Antarctica/Rothera, Antarctica/South_Pole,
Antarctica/Syowa, Antarctica/Troll, Antarctica/Vostok, Arctic/Longyearbyen, Asia/Atyrau,
Asia/Barnaul, Asia/Famagusta, Asia/Qostanay, Asia/Tomsk, Asia/Yangon, Brazil/Acre,
Brazil/DeNoronha, Brazil/East, Brazil/West, CET, CST6CDT, Canada/Atlantic, Canada/
Central, Canada/Eastern, Canada/Mountain, Canada/Newfoundland, Canada/Pacific,
Canada/Saskatchewan, Canada/Yukon, Chile/Continental, Chile/EasterIsland, Cuba, EET,
EST, EST5EDT, Egypt, Eire, Europe/Astrakhan, Europe/Kirov, Europe/Saratov, Europe/
Ulyanovsk, GB, GB-Eire, GMT, GMT+0, GMT-0, GMT0, Greenwich, HST, Hongkong,
Iceland, Iran, Israel, Jamaica, Japan, Kwajalein, Libya, MET, MST, MST7MDT, Mexico/
BajaNorte, Mexico/BajaSur, Mexico/General, NZ, NZ-CHAT, Navajo, PRC, PST8PDT,
Poland, Portugal, ROC, ROK, Singapore, Turkey, UCT, US/Alaska, US/Aleutian, US/
Arizona, US/Central, US/East-Indiana, US/Eastern, US/Hawaii, US/Indiana-Starke, US/
Michigan, US/Mountain, US/Pacific, US/Samoa, UTC, Universal, W-SU, WET, Zulu
UserInterface Assistant ProactiveMeetingJoin (CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55,
Room55Dual, Room70, Room70G2, RoomPanorama, Room70Panorama, Desk Pro, Boards)
OLD: Default: False
NEW: Default: True
Video DefaultLayoutFamily Local (RoomPanorama, Room70Panorama)
OLD: Auto/Equal/Overlay/Panorama/Prominent/Single
NEW: Auto/Equal/Overlay/Prominent/Single
Video DefaultLayoutFamily Remote (RoomPanorama, Room70Panorama)
OLD: Auto/Equal/Overlay/Panorama/Prominent/Single
NEW: Auto/Equal/Overlay/Prominent/Single
Video DefaultLayoutFamily Remote (Desk Pro)
OLD: Auto/Equal/Modal/Overlay/Prominent/Single
NEW: Auto/Equal/Overlay/Prominent/Single
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
13
Cisco Webex DX70 and DX80 Administrator Guide
Configuration changes in CE9.13
New configurations
Audio Microphones AGC (Codec Plus, Room Kit, SX20)
Logging CloudUpload Mode (All products)
Configurations that are removed
UserInterface Whiteboard ActivityIndicators (MX200 G2, MX300 G2, MX700, MX800, SX10, SX20, SX80)
UserInterface RoomKitTouch Enabled (Boards, Room 70 G2, Room Kit Mini, Room Kit, Desk Pro, Room 55,
Codec Plus, Room 55 Dual, Room 70, Codec Pro)
Configurations that are modified
Audio Output InternalSpeaker Mode (Codec Plus, MX700/MX800, MX200 G2, MX300 G2, Room Kit, Room
55, Room 55 Dual, Room 70, Room 70 G2)
OLD: ADMIN
NEW: ADMIN, INTEGRATOR
Cameras PowerLine Frequency (Codec Plus, Codec Pro, Desk Pro, MX200 G2, MX300 G2, MX700, MX800,
Room Kit, Room Kit Mini, Room 55, Room 55 Dual, Room 70, Room 70 G2, SX20, SX80)
OLD: Access: public-api-preview
NEW: Access: public-api
Cameras PresenterTrack CameraPosition Pan (Codec Plus, Codec Pro, MX700, MX800, Room 55 Dual,
Room 70, Room 70 G2, SX80)
OLD: Access: public-api-preview
NEW: Access: public-api
Cameras PresenterTrack CameraPosition Tilt (Codec Plus, Codec Pro, MX700, MX800, Room 55 Dual,
Room 70, Room 70 G2, SX80)
OLD: Access: public-api-preview
NEW: Access: public-api
Cameras PresenterTrack CameraPosition Zoom (Codec Plus, Codec Pro, MX700, MX800, Room 55 Dual,
Room 70, Room 70 G2, SX80)
OLD: Access: public-api-preview
NEW: Access: public-api
Cameras PresenterTrack Connector (Codec Plus, Codec Pro, MX700, MX800, Room 55 Dual, Room 70,
Room 70 G2, SX80)
OLD: Access: public-api-preview
NEW: Access: public-api
Cameras PresenterTrack Enabled (Codec Plus, Codec Pro, MX700, MX800, Room 55 Dual, Room 70, Room
70 G2, SX80)
OLD: Access: public-api-preview
NEW: Access: public-api
Cameras PresenterTrack PresenterDetectedStatus (Codec Plus, Codec Pro, MX700, MX800, Room 55
Dual, Room 70, Room 70 G2, SX80)
OLD: Access: public-api-preview
NEW: Access: public-api
Cameras PresenterTrack TriggerZone (Codec Plus, Codec Pro, MX700, MX800, Room 55 Dual, Room 70,
Room 70 G2, SX80)
OLD: Access: public-api-preview
NEW: Access: public-api
Conference ActiveControl Mode (All products)
OLD: Access: public-api-preview
NEW: Access: public-web-only
Conference Encryption Mode (All products)
OLD: Backend: Any
NEW: Backend: On-prem
Provisioning CUCM CallManagementRecords (All products)
OLD: Access: public-api-preview
NEW: Access: public-api
OLD: Default: On
NEW: Default: Off
UserInterface Assistant Mode (Boards, Codec Plus, Codec Pro, Desk Pro, Room Kit, Room Kit Mini, Room 55,
Room 55 Dual, Room 70, Room 70 G2)
OLD: Access: public-api-preview
NEW: Access: public-api
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
14
Cisco Webex DX70 and DX80 Administrator Guide
Video Input Connector [n] OptimalDefinition Threshold60fps (Room Kit, Room 55)
OLD: Default: 1920_1080
NEW: Default: Never
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
15
Cisco Webex DX70 and DX80 Administrator Guide
Configuration changes in CE9.12
New configurations
Audio Input WebView [1] Mode (Codec Pro, Room 70 G2)
BYOD TouchForwarding Enabled (Board 55S, Board 70S, Board 85S)
Cameras Camera [n] Flip (CodecPlus, Room55Dual, Room70, Room70G2)
Cameras SpeakerTrack ConnectorDetection CameraLeft (Codec Plus)
Cameras SpeakerTrack ConnectorDetection CameraRight (Codec Plus)
Cameras SpeakerTrack ConnectorDetection Mode (Codec Plus)
Cameras SpeakerTrack TrackingMode (Codec Plus)
HttpClient UseHttpProxy (All products)
HttpFeedback UseHttpProxy (All products)
NetworkServices SMTP * (Room Kit Mini)
Provisioning CUCM CallManagementRecords (All products)
Standby Signage InteractionMode (Room Kit Mini)
UserInterface Bookings Visibility Title (All products)
UserInterface Diagnostics Notifications (All products)
UserInterface Features Call Keypad (All products)
UserInterface Proximity Notifications (All products)
UserInterface RoomKitTouch Enabled (CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55,
Room55Dual, Room70, Room70G2, Boards)
UserInterface Whiteboard ActivityIndicators (All products)
VoiceControl Wakeword Mode (CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55, Room55Dual,
Room70, Room70G2, Boards)
WebEngine Features WebGL (CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55, Room55Dual,
Room70, Room70G2, Boards)
WebEngine UseHttpProxy (CodecPro, CodecPlus, RoomKit, RoomKitMini, Room55, Room55Dual, Room70,
Room70G2, Boards)
<path> * means that the change applies to all configurations starting with <path>.
Configurations that are removed
Conference VideoBandwidth Mode (All products)
NetworkServices SNMP Host [1..3] Address (All products)
Configurations that are modified
Macros XAPI Transport (All products except SX10)
OLD: Default: TSH
NEW: Default: WebSocket
Network [1] QoS Diffserv Audio (All products)
OLD: Default: 0
NEW: Default: 46
Network [1] QoS Diffserv Data (All products)
OLD: Default: 0
NEW: Default: 34
Network [1] QoS Diffserv Signalling (All products)
OLD: Default: 0
NEW: Default: 24
Network [1] QoS Diffserv Video (All products)
OLD: Default: 0
NEW: Default: 34
NetworkServices SMTP Username (Boards, DX70, DX80)
OLD: String (0, 50)
NEW: String (0, 80)
SerialPort BaudRate (Codec Pro, Room 70 G2)
OLD: 115 20 0
NEW: 9600/19200/38400/57600/115200
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
16
Cisco Webex DX70 and DX80 Administrator Guide
The Cisco Webex DX70 and DX80 are all-in-one units designed to
video-enable small collaboration spaces.
They are high quality featuring high-definition (HD) video, unified
communications features, a display for your laptop, and expanded
capabilities.
Features and benefits
• A dedicated, always-on 1080p HD video communication
device
• A high-quality audio system for speakerphone
• Support for wireless Bluetooth headset, Bluetooth headset
with USB dongle, and USB headset
• A 23-inch (DX80) or 14-inch (DX70) 16:9 screen that provides
an engaging experience for video calls
• A multitouch capacitive touchscreen that provides an elegant
and powerful user interface
• Whiteboard and annotation (only supported on devices that
are registered to the Webex cloud service)
• A self-provisioning device that is simple for users to take out
of the box and start using quickly
• Ability for administrators to use Cisco Expressway for the
secure connection of their remote workers
• Registers with Cisco Unified Communications Manager
(UCM), Cisco TelePresence Video Communication Server
(VCS), and Cisco Webex
DX70 and DX80 at a glance
Cisco Webex DX70
Cisco Webex DX80
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
17
Cisco Webex DX70 and DX80 Administrator Guide
Power On and Off (page 1 of 2)
Power On/Off with the Power button
The power button, with LED indicator, is placed on the front as shown in the illustration.
Switch on
The device does not start automatically.
Press the power button gently, and hold for
a few seconds.
The LED is lit while the device starts up.
Switch off
Press the power button gently and hold until
the light goes out.
Enter/exit standby mode
Press the power button briefly. It takes a few
seconds before the device enters standby.
Power button with LEDs
encircling the button
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
18
Cisco Webex DX70 and DX80 Administrator Guide
Restart and standby using the user interface
Restart the device
1. Select the device name or address at the top of the user
interface.
2. Select Settings, followed by Restart.
3. Select Restart again to confirm your choice.
Enter standby mode
1. Select the device name or address at the top of the user
interface.
2. Select Standby.
Exit standby mode
• Tap the screen.
Power Off or restart the device remotely
Sign in to the web interface and navigate to Maintenance >
Restart.
Restart the device
Click Restart device... and confirm your choice.
It takes a few minutes before the device is ready for use.
Power Off the device
Click Shutdown device... and confirm your choice.
You cannot power the device on again remotely; you have
to use the power button.
Power On and Off (page 2 of 2)
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
19
Cisco Webex DX70 and DX80 Administrator Guide
Camera LED
Status LED
The status LED is a circle around the power button.
The normal LED color is white. A red light indicates
hardware failure.
Normal operation (not standby):
Steady light.
In standby mode:
The LED pulsates slowly.
No network connection:
The LED repeatedly flashes twice.
During startup (boot):
The LED flashes.
Camera LED
The camera LED is just above the camera lens.
Incoming call:
The LED flashes.
In call:
Steady light.
Status LED around
the power button
Status LED around
the power button
Camera LED
LED indicators
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction

D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
20
Cisco Webex DX70 and DX80 Administrator Guide
In general, we recommend you to use the web interface
to administer and maintain the device, as described in
this administrator guide.
Alternatively, you can access the API of the device by
other methods:
• HTTP/HTTPS (also used by the web interface)
• WebSocket
• Telnet
• SSH
• Serial connection
If you want more information about the different access
methods, and how to use the API, refer to the API guide
for the device.
Tip
If the configuration or status is available in the API, the
web interface setting or status translates into an API
configuration or status as follows:
Set X>Y>Zto Value (web)
is the same as
xConfiguration X Y Z: Value (API)
Check X > Y > Z status (web)
is the same as
xStatus X Y Z (API)
For example:
Set SystemUnit > Name to MySystem
is the same as
xConfiguration SystemUnit Name: MySystem
Check SystemUnit > Software > Version status
is the same as
xStatus SystemUnit Software Version
More settings and statuses are available in the web
interface than in the API.
How to administer the video conferencing device
Access method Notes How to enable/disable the methods
HTTP/HTTPS • Used by the web interface of the device
• Non-secure (HTTP) or secure (HTTPS) communication
• HTTPS: Enabled by default
• HTTP: Enabled by default only for devices that have been
upgraded to CE9.4 (or later) from an earlier software
version, provided that the device has not been factory
reset after the upgrade
NetworkServices > HTTP > Mode
Restart the device for changes to take
effect
WebSocket • Tied to HTTP, so that also HTTP or HTTPS must be
enabled before you can use WebSocket
• Encrypted (wss) or unencrypted (ws) communication
• Disabled by default
NetworkServices > HTTP > Mode
NetworkServices > Websocket
Restart the device for changes to take
effect
Telnet • Non-secure TCP/IP connection
• Disabled by default
NetworkServices > Telnet > Mode
You do not need to restart the device.
It may take some time for changes to
take effect
SSH • Secure TCP/IP connection
• Enabled by default
NetworkServices > SSH > Mode
You do not need to restart the device.
It may take some time for changes to
take effect
Serial connection • Connect to the device with a cable. IP-address, DNS, or
a network is not required
• Enabled by default
• For security reasons, you are asked to sign in by default
(SerialPort > LoginRequired)
SerialPort > Mode
Restart the device for changes to take
effect
If all access methods are disabled (set to Off), you can no longer configure the device. You are not able to re-enable
(set to On) any of the access methods, and you must factory reset the device to recover.
(page 1 of 4)
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices

Introduction