Cisco SX80 Service manual

D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
1
Cisco TelePresence SX80 Administrator Guide
Collaboration Endpoint software version 9.1
JUNE 2017
Administrator guide
for Cisco TelePresence SX80
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices


D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
2
Cisco TelePresence SX80 Administrator Guide
Table of contents
Introduction....................................................................................................................... 4
User documentation and software ....................................................................................... 5
What’s new in CE9................................................................................................................ 6
SX80 at a glance..................................................................................................................11
Power On and Off ................................................................................................................12
Front panel LEDs..................................................................................................................13
How to administer the video system....................................................................................14
Configuration .................................................................................................................. 18
User administration ............................................................................................................. 19
Change the system passphrase ......................................................................................... 20
System configuration .......................................................................................................... 21
Add a sign in banner ........................................................................................................... 22
Manage the service certificates of the video system......................................................... 23
Manage the list of trusted certificate authorities (CAs) ...................................................... 24
Set up secure audit logging................................................................................................ 25
Manage pre-installed certificates for CUCM via Expressway provisioning........................ 26
Delete CUCM trust lists....................................................................................................... 27
Change the persistency mode............................................................................................ 28
Set strong security mode ................................................................................................... 29
Set up Intelligent Proximity for content sharing .................................................................. 30
Adjust the video quality to call rate ratio............................................................................. 35
Packet loss resilience - ClearPath...................................................................................... 37
Choose wallpaper ............................................................................................................... 38
Choose a ringtone and set the ringtone volume ................................................................ 39
Manage the Favorites list .................................................................................................... 40
Peripherals...................................................................................................................... 41
Connect monitors ............................................................................................................... 42
Connect input sources........................................................................................................ 44
Extend the number of input sources................................................................................... 46
Information about displays.................................................................................................. 47
Set up the SpeakerTrack feature ........................................................................................ 48
Set up the PresenterTrack feature ...................................................................................... 49
Briefing room set-up........................................................................................................... 54
Using extra loudspeakers and local reinforcement ............................................................ 57
Connect the Touch 10 controller ........................................................................................ 58
Thank you for choosing Cisco!
Your Cisco product has been designed to give you many
years of safe, reliable operation.
This part of the product documentation is aimed at
administrators working with the setup and configuration of
the video system.
Our main objective with this Administrator guide is to
address your goals and needs. Please let us know how
well we succeeded!
May we recommend that you visit the Cisco web site
regularly for updated versions of this guide.
The user documentation can be found on
► http://www.cisco.com/go/sx-docs
How to use this guide
The top menu bar and the entries in the Table of contents
are all hyperlinks. You can click on them to go to the topic.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices


D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
3
Cisco TelePresence SX80 Administrator Guide
Maintenance ................................................................................................................... 61
Upgrade the system software ............................................................................................ 62
Add option keys .................................................................................................................. 64
System status ..................................................................................................................... 65
Run diagnostics................................................................................................................... 66
Download log files............................................................................................................... 67
Create a remote support user ............................................................................................ 68
Backup or restore a configuration....................................................................................... 69
Revert to the previously used software image ................................................................... 70
Factory reset the video system .......................................................................................... 71
Factory reset the Touch 10 ..................................................................................................74
Capture user interface screenshots ................................................................................... 75
System settings .............................................................................................................. 76
Overview of the system settings ........................................................................................ 77
Audio settings ..................................................................................................................... 82
CallHistory settings ............................................................................................................. 89
Cameras settings................................................................................................................ 90
Conference settings ........................................................................................................... 96
FacilityService settings ......................................................................................................101
GPIO settings .................................................................................................................... 102
H323 settings.................................................................................................................... 103
Logging settings ............................................................................................................... 106
Network settings............................................................................................................... 107
NetworkServices settings..................................................................................................114
Peripherals settings ...........................................................................................................119
Phonebook settings ...........................................................................................................121
Provisioning settings......................................................................................................... 122
Proximity settings.............................................................................................................. 125
RoomAnalytics settings .................................................................................................... 126
RTP settings.......................................................................................................................127
Security settings ............................................................................................................... 128
SerialPort settings............................................................................................................. 130
SIP settings ........................................................................................................................131
Standby settings ............................................................................................................... 135
SystemUnit settings.......................................................................................................... 136
Time settings .................................................................................................................... 137
UserInterface settings....................................................................................................... 140
UserManagement settings.................................................................................................142
Video settings ................................................................................................................... 144
Experimental settings ....................................................................................................... 154
Appendices................................................................................................................... 155
How to use Touch 10 ........................................................................................................ 156
Set up remote monitoring ................................................................................................. 157
Access call information while using the web interface..................................................... 158
Place a call using the web interface ................................................................................. 159
Share content using the web interface..............................................................................161
Local layout control........................................................................................................... 162
Control a local camera...................................................................................................... 163
Control a far end camera .................................................................................................. 164
Room analytics.................................................................................................................. 165
Add in-room controls to Touch 10 ................................................................................... 166
Manage startup scripts ..................................................................................................... 167
Access the video system’s XML files .............................................................................. 168
Execute API commands and configurations from the web interface ............................... 169
Advanced customization of audio and GPIO......................................................................170
Serial interface...................................................................................................................171
Open TCP Ports.................................................................................................................172
Technical specification.......................................................................................................173
Supported RFCs ................................................................................................................175
User documentation on the Cisco web site.......................................................................176
Cisco contacts .................................................................................................................. 177
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices


D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
4
Cisco TelePresence SX80 Administrator Guide
Chapter 1
Introduction
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Introduction

D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
5
Cisco TelePresence SX80 Administrator Guide
Products covered in this guide
• Cisco TelePresence SX80
User documentation
This guide provides you with the information required to
administrate the video system.
The guide primarilly addresses capabilities and
configurations of on-premise registered video systems
(CUCM, VCS), but a sub-set of the capabilities and
configurations also applies to devices that are registered
to our cloud service (Cisco Spark).
Refer to the ► User documentation on the Cisco web site
appendix for more information about the guides for this
product.
Documentation on the Cisco web site
Visit the Cisco web site regularly for updated versions of
the guides:
► http://www.cisco.com/go/sx-docs
Documentation for cloud registered devices
For more information on Cisco Spark room devices, visit:
► https://help.webex.com/community/cisco-cloud-
collab-mgmt
Cisco Project Workplace
Explore the Cisco Project Workplace to find inspiration
and guidelines when preparing an office or meeting room
for video conferencing:
► http://www.cisco.com/go/projectworkplace
Software
Download software for the endpoint from the Cisco web
site:
► http://www.cisco.com/cisco/software/navigator.
html
We recommend reading the Software release notes
(CE9):
► http://www.cisco.com/c/en/us/support/
collaboration-endpoints/telepresence-quick-set-
series/tsd-products-support-series-home.html
Converting to CE software
Before upgrading from TC software to CE software,
it is important to consider the upgrade requirements;
otherwise upgrading to CE software can leave you
with a non-functional deployment that requires you to
downgrade.
Refer to the software release notes, and the
► Upgrade the system software chapter.
User documentation and software
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Introduction

D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
6
Cisco TelePresence SX80 Administrator Guide
This chapter provides an overview of the new and changed
system settings, and the new features and improvements in
the Cisco Collaboration Endpoint software version 9 (CE9)
compared to CE8.
For more details, we recommend reading the Software
release notes:
► http://www.cisco.com/c/en/us/support/collaboration-
endpoints/telepresence-quick-set-series/tsd-products-
support-series-home.html
What’s new in CE9
New features and improvements in CE9.1
Dual Screen experience and Active Control
for CMS based meetings
Dual screen video systems can utilize both screens
for video in a CMS based meeting. The video system
receives two transcoded video streams and one
content stream from the CMS, and utilizes both
screens to render the streams.
With Active Control enabled, you get a participant
list that shows all meeting participants and their
current activity status, such as mute, sharing and
active speaker indication. You can change the layout
seamlessly from the touch interface by using the
layout selection panels.
New wake-up experience
The new wake-up experience introduces a Halfwake
state, which leads to a calmer wake-up of the system,
and gives users better guidance on how to get
started.
When wake-up on motion detection is enabled the
system will automatically wake to the Halfwake state
when people enter the room. It will also wake to this
state when a user pairs a Cisco Proximity client to the
system.
Additions for Room Analytics
Detect people presence in the room: The video
system has the capability to find whether there are
people present in the room. The feature is based on
ultrasound, and it does not keep record of who was in
the room, only whether or not the room is in use.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Introduction

D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
7
Cisco TelePresence SX80 Administrator Guide
New features and improvements in CE9.0
Updated user interface
The user interfaces on the Touch 10, on screen, and on
integrated touch screens have been updated. The main
menu items on the home screen have been replaced with
more prominent activities.
Some of the settings have been removed from the Touch
10 advanced settings menu to align with the on-screen
display menu.
Wakeup on motion detection
Wakeup on motion detection senses when a person walks
into the conference room and the video system wakes up
automatically. You need to enable the following setting for
this feature to work:
xConfiguration Standby WakeupOnMotionDetection
You can’t manually set the video system in standby when
this feature is enabled.
Updated In-Room Control editor
The In-Room Control editor is updated with a new look,
improved logic and usability for producing a control
interface more efficiently. In addition, a new directional
pad widget and an In-Room Control simulator is added.
Added language support
We have added support for Potuguese (Portugal) to the
on-screen display and Touch controller menus.
Other changes
• Support for HTTPS client certificates has been added.
• Unplugging the presentation cable stops the
presentation sharing instantly.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Introduction

D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
8
Cisco TelePresence SX80 Administrator Guide
System configuration changes in CE9.1
New configurations
RoomAnalytics PeoplePresenceDetector
Configurations that are removed
None.
Configurations that are modified
Conference DefaultCal Rate
OLD: Default value: 3072
NEW: Default value: 6000
Conference MultiStream Mode
OLD: Valuespace: Off; Default value: Off
NEW: Valuespace: Auto/Off; Default value: Auto
Network [1] IEEE8021X Password
OLD: Valuespace: String(0, 32)
NEW: Valuespace: String(0, 50)
Peripherals Profile TouchPanels
OLD: Default value: NotSet
NEW: Default value: Minimum1
Video Input Connector [n] PresentationSelection
OLD: Valuespace: AutoShare/Manual/OnConnect
NEW: Valuespace: AutoShare/Desktop/Manual/OnConnect
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Introduction

D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
9
Cisco TelePresence SX80 Administrator Guide
System configuration changes in CE9.0
New configurations
Cameras SpeakerTrack Closeup
NetworkServices HTTPS Server MinimumTLSVersion
NetworkServices HTTPS StrictTransportSecurity
Peripherals Pairing CiscoTouchPanels EmcResilience
Standby WakeupOnMotionDetection
Configurations that are removed
UserInterface UserPreferences
Conference VideoBandwidth PresentationChannel Weight
Standby AudioMotionDetection
Configurations that are modified
Cameras Camera [n] *
OLD: User role: ADMIN, USER
NEW: User role: ADMIN, INTEGRATOR
Cameras PresenterTrack *
OLD: User role: ADMIN, USER
NEW: User role: ADMIN, INTEGRATOR
Cameras SpeakerTrack *
OLD: User role: ADMIN, USER
NEW: User role: ADMIN, INTEGRATOR
Conference MultiStream Mode
OLD: Value space: Auto/Off
NEW: Value space: Off
UserInterface Language
NEW: Portuguese added to value space
Configurations with the new INTEGRATOR user role
A new user role - INTEGRATOR - is introduced in CE9.0. It has been added to the following
configurations:
Audio DefaultVolume
Audio Input HDMI [n] *
Audio Input Line [n] *
Audio Input Microphone [n] *
Audio MicrophoneReinforcement *
Audio Microphones Mute Enabled
Audio Output HDMI [n] *
Audio Output Line [n] *
Audio SoundsAndAlerts *
CallHistory Mode
Cameras Camera [n] *
Cameras PowerLine Frequency
Cameras PresenterTrack *
Cameras SpeakerTrack *
Conference DefaultCall Rate
Conference DoNotDisturb DefaultTimeout
FacilityService *
GPIO Pin [n] Mode
Peripherals Pairing Ultrasound Volume MaxLevel
Peripherals Pairing Ultrasound Volume Mode
Peripherals Profile *
SerialPort BaudRate
SerialPort Mode
Standby *
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Introduction

D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017. www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
10
Cisco TelePresence SX80 Administrator Guide
SystemUnit Name
Time Zone
UserInterface OSD Output
UserInterface Wallpaper
Video ActiveSpeaker DefaultPIPPosition
Video Input Connector [n] CameraControl CameraId
Video Input Connector [n] CameraControl Mode
Video Input Connector [n] InputSourceType
Video Input Connector [n] Name
Video Input Connector [n] OptimalDefinition Profile
Video Input Connector [n] PresentationSelection
Video Input Connector [n] Quality
Video Input Connector [n] RGBQuantizationRange
Video Input Connector [n] Visibility
Video Monitors
Video Output Connector [n] *
Video Presentation DefaultPIPPosition
Video Selfview Default *
Video Selfview OnCall *
<path> * means that the change applies to all configurations starting with <path>.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices

Introduction