Cisco 6825 User manual

Cisco 6825 IP DECT Handset Quick Start Guide
1GoMomentum.com | 888.538.3960
Your Handset
21
6
3
4
5
394071
21
6
3
4
5
Legend
Indicator light (LED)
Emergency button
Headset port
Softkeys, phone control buttons (Speaker, Menu),
Navigation cluster (Navigation ring and Select button
Call Control buttons (Answer/Send, Power/End)
Keypad
Volume and Mute buttons
Turn On Your Handset
Press and hold Power/End until the screen turns on.
Turn Off Your Handset
Press and hold Power/End until the screen turns off.
Lock the Handset Keypad
You can lock the handset keypad to stop accidental dialing.
When you lock the keypad, you can still dial emergency
numbers. The softkey label doesn't display when you lock
the keypad.
Press and hold Zero (0) until the screen
displays “Press and hold 0”.
Unlock the Handset Keypad
You must unlock the handset keypad to make calls. You
can however, dial emergency numbers from the locked
keypad. When you unlock the keypad, the softkey labels
appear.
Press and hold Zero (0) until the message
“Press and hold 0” does not display on the screen.
Answer a Call
Press Answer/Send .
Hold and Resume a Call
1. From an active call, press Hold.
2. Press Resume to pick the call back up.
Mute Your Call
1. Press Mute .
2. To unmute yourself, press Mute again.
Create a Conference Call
1. From an active call, press Conf.
2. Enter the coworker’s number and press
Answer/Send .
3. Press Conf after the coworker answers.
Transfer a Call
1. From an active call, press Transfer.
2. Enter the coworker’s number and press Answer/
Send .
3. Press Transfer after the first ring tone or after your
coworker answers.
Make a Call
1. When your handset is idle, enter the phone number
with the keypad.
2. Press Answer/Send .

Add a Contact
1. Press Recents and highlight the recent caller.
2. Press More, highlight Save as Contact, and press
Select.
3. Highlight the category, press Select, and press Save
to save the number.
4. (Optional) Highlight a field to add or replace other
information.
5. Press Save and press Yes.
Call a Local Contact
1. Press Contacts and highlight an entry.
2. (Optional) Press the right on the Navigation ring
to select an alternate number.
3. Press Call.
Call a Directory Contact
1. Press Directory.
2. Scroll down to highlight an entry, or press Search,
enter a name, and press Search.
3. Press Line and select a line to call on.
4. Press Select.
View Your Recent Calls
left or right to view
1. Press Recents.
2. Press the Navigation ring
different lists.
Use Push to Talk
1. Press and hold Mute .
2. Talk when connected and release Mute at the end of
your message.
Assign a Speed-Dial Number
1. Press Menu >Contacts or Contacts:
2. Highlight a contact.
3. Press More and select Speed Dial.
4. To reuse an existing speed-dial index entry, highlight a
number, press Delete and press Yes.
5. Highlight an empty speed-dial index and press Add.
6. Press Power/End .
Access Your Voicemail
until you hear the
1. Press and hold One
ringtone.
2. Follow the voice prompts.
Change the Volume on a Call
While on a call, press Volume up or down.
Set Do Not Disturb
1. Press Menu .
2. Select Settings > Do not disturb.
3. Select Disabled (default) to turn off DND or select
Enabled to turn on DND.
4. Press Select to save the setting.
Set the Coverage Warning
1. Press Menu .
2. Select Settings > Audio Settings.
3. Highlight Coverage warning.
4. Press Off to stop the tone or press On to play the tone.
Report an Emergency Situation
for 3 seconds.
(If configured)
Press and hold Emergency
2GoMomentum.com | 888.538.3960
Cisco IP DECT 6825 Handset Quick Start Guide