Cisco 8861 Instruction manual

Cisco 8861 Quick User Guide
Incoming Call
or Voicemail
Indicator
Feature and
Session
buttons
Voicemail
Applications
Directory
Back Key
Dial Pad
Softkeys
Release Key
Navigation
Hold
Transfer
Conference
Headset
Speaker
Mute
Volume Keys
Feature and Session Buttons
Make a Call
Answer a Call
Put a Call on Hold
Use feature buttons (left side) to view calls on
a line or access features such as Speed Dial.
Use session buttons (right side) to perform tasks
such as resuming a held call. If you use a locale
that reads right to left, the feature and session
button locations are swapped.
Enter a number and pick up the handset.
Press the flashing amber line button.
Press Hold . To resume a held call, press Hold again.
Midshire Telecom: Midshire House, Doranda Way, West Bromwich, West Midlands B71 4LT
www.midshiretelecom.co.uk T: 0800 008 6038 E: [email protected]

Pair a Mobile Device
1. Put your mobile device in discoverable mode.
2. On your IP Phone, press Applications
3. Select Bluetooth > Add Bluetooth.
4. Select your mobile device from the available devices list to pair.
5. Verify the passkey on your mobile device and your IP Phone.
6. When you are prompted to save mobile contacts and call history available on your
IP Phone.
Add Another Person to a Call
Make a Call with a Headset
Listen to your Voice Messages
Forward All Calls
1. From a connected call that is not on hold, press Conference
2. Press Active calls to select a held call
3. Press Conference again.
1. Plug in a headset.
2. Enter a number using the keypad
3. Press Headset
Press Messages and follow the voice prompts. To check messages for a specific
line, press line button first.
1. Select line and press Forward all.
2. Dial the number that you want to forward to, or press Voicemail.
3. To receive calls again, press Forward o.
Midshire Telecom: Midshire House, Doranda Way, West Bromwich, West Midlands B71 4LT
www.midshiretelecom.co.uk T: 0800 008 6038 E: [email protected]
View Your Recent Calls
Transfer a Call
1. Press Applications
2. Select Recents.
3. Select a line to view.
1. From a call that is not on hold, press Transfer
2. Enter the other person’s phone number.
3. Press Transfer again.