Comeup CK-1000 User manual

Compact Chain Hoist
Model: CK-1000
PN : 441121 110V 441221 220V
441228 220V
Introduction
Feature
Lifting capacity: 1,000 kg
Lifting height: 6 m
Line speed: 3.2 m/min
Motor output: 750w x 9.5A at 100-120V ; 750w x 4.5A at 200-240V
Brake: Dual brakes of double mechanical ratchet pawls and a
motor dynamic brake
Control: Pendant switch powers the hoist
Unpacking
．Hoist assembly 1pc
．Load chain 6.3 mm x 12.5 m w/hook block 1pc
．Power lead 1.5 mm2
x 3C x 3m w/3 round pins plug 1pc
．Power lead 2.0 mm2
x 3C x 3m w/2 flat pins plug for PN:441228 1pc
．Pendant switch PB-417 w/cord 1.25 mm2
x 5C x 6m 1pc
Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage.
Information requesting or parts ordering
Please specify the followings information:
．Hoist PN ．Replacement part number
．Serial number ．Quantity for each part
．Part description
Installation
Before using the hoist, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
Load Chain Replacement
1). Be sure that the replacement chain is the exact size, grade and
constructions as the original chain. The new load chain must have an odd
number links so that both its end links have the same orientation. Destroy
the old chain to prevent its reuse.
2). When replacing load chain, check for wear on mating parts such as
sprocket , and replace parts if necessary.
3). Remove all chain components including load hook kit from the old chain
for reuse on new chain. Inspect and replace any damaged or worm parts.
4). Feed the end link on the load side of the new chain through the require
chain components and idle sheave of load hook. Attach the remaining
chain components to the chain guide rail for the proper locations.
5). Operate the hoist down to move the chain through the hoist body. Stop
when a sufficient amount of new chain is accumulated on the load side.
Wiring Diagram

Warning
．The winch is not intended to be used in any manner for the movement or
lifting of personnel.
Parts List
Item No. Description Part No. Qty
1 Gear box 881789 1
2 Motor kit 110V 881790 1
Motor kit 220V 881791
3 1st pinion kit 881792 1
4 1st gear kit 881793 1
5 Ratchet stopper kit 881794 2
6 Sprocket kit 881795 1
7 2nd gear kit 881858 1
8 R-type retaining ring 881867 1
9 Sprocket protector kit 881796 1
10 Brake rear cover kit 881797 1
11 Hook suspension 881798 1
12 Head pin 881799 1
13 Gearbox rear cover kit 881857 1
14 Electric cover kit 881800 1
15 Load chain 12.5 m 882382 1
16 Hook block 881804 1
17 Lift limiter 881805 1
18 Chain bag kit 882383 1
19 Control panel 110V 881807 1
Control panel 220V 881808
20 Cable gland AG-16 881809 1
21 Cable gland AG-20 881810 1
22 Power lead w/3 round pins plug 110V/220V 881812 1
Power lead w/2 flat pins plug for PN:441228 881811
23 Remote control, PB-417 883139 1
24 Fix bolt kit 881859 1
Hoist Assembly
2018/07/10 Ver:3