Comeup CSH-250 User manual

Strap Hoist
Model: CSH-250
PN: 472500 110V 472610 110V 472520 220V
Introduction
Feature
Lifting capacity-top layer: 250 kg
Lifting height: 5M
Lifting speed: 5 - 6 m/min
Brake: Spring applied drag brake + Disk Drag brake
+ Motor D
y
namic brake
Limit protection: Lifting limiters
Control: Pendant switch powers the hoist
Unpacking
．Hoist assembly 1pc
．Strap 50 mm x 1.2 mm x 5.5 M 1pc
．Weight hook CHW-0044 1pc
．Power lead 2.0 mm2x 3C x 3 m and plug for PN:472500 1pc
．Power lead 1.5 mm2x 3C x 3 m and plug for PN:472520 1pc
．Power lead 2.0 mm2x 3C x 3 m and plug for PN:472610 1pc
．Pendant switch PB-417 w/cord 1.25 mm2x 6C x 5 m 1pc
Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless hoist operation may result in personal injury hazards or property
damage.
Information requesting or parts ordering
Please specify the followings information:
．Hoist PN
．Serial number
．Part description
．Replacement part number
．Quantity for each part
Installation
Before using the hoist, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
Strap replacement
．Tighten the strap on the drum with 2 piece of set screw M5 x 20L.
．Put a strap through the hole of the safety stopper.
．Insert a sleeve pin through the thimble of strap.
．Insert a pin through the sleeve pin and bent it by pliers.
Wiring Diagram

Warning
．The hoist is not intended to be used in any manner for the movement or lifting
of personnel.
．The strap winding on the drum shall remain 3 wraps on the drum and must not
be used to ensure safe operation.
．Strap may break under unnoticed conditions. Operate the strap hoist away
from the strap operating area and perform regular maintenance.
Part List
Item No. Description Part No. Qty
1 Motor kit 100~120V 883553 1
Motor kit 200~240V 883625
2 Motor support rack 883554 1
3 Motor couple kit 880988 1
4 Drum bushing 883555 1
5 Drum kit 883556 1
6 Gearbox support rack 883557 1
7 Strap 883558 1
8 Weight hook w/safety stopper 883559 1
9 Cover kit 883560 1
10 1st shaft kit 883561 1
11 3rd ring gear kit 883563 1
12 2nd stage carrier 883564 1
13 1st stage carrier 883566 1
14 Brake kit 883568 1
15 Gear box kit 883569 1
16 Hanger kit 883570 1
17 Over-winding bracket kit 883571 1
18 Terminal upper cover kit 883572 1
19 Control panel,AC110V 883573 1
Control panel,AC220V 883626
20 Remote control, PB-417 883574 1
21 Power lead w/2 flat pins plug for PN:472500 883876 1Power lead w/2 flat pins plug for PN:472610 883879
Power lead w/2 round pins plug for PN:472520 883877
Hoist Assembly
2020/05/27 Ver:6