COMPOUND PLATINUM CPL-DAF-1027 User manual

SKU: CPL-DAF-1027
ASSEMBLY INSTRUCTIONS
DUAL ARM FUNCTIONAL TRAINER
PLATINUM SERIES
COMPOUND.
FITNESS EQUIPMENT
CAUTION: Read all precautions and instructions before
using this equipment. Save this manual for future reference.

01
CONTENTS
02 General warnings and maintenance advice
11-30 Assembly Instructions
Explained as a series of steps,with each step containing:
Pictures,descriptions and quantities of the parts required
Notes
Diagram showing how the parts fit together
tsiLtraP12-13
●
●
●

Assembly Instructions
02
This exercise equipment is built for optimum safety. Be sure to read the entire
manual before you assemble or operate your equipment. Please note the
following safety precautions:
1. Keep children and pets away from the equipment at all times. Do not leave
children unattended in the same room with the equipment.
2. Only one person at a time should use the equipment.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms STOP the workout at once CONSULT A PHYSICIAN IMMEDIATELY.
4. Position the equipment on a clear, level surface. DO NOT use the equipment
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the equipment.
7. Use the equipment only for its intended use as described in this manual.
DO NOT use attachments not recommended by the manufacturer.
8. Before using the equipment, always do stretching exercises to properly
warm up.
9. Never operate the equipment if the equipment is not functioning properly.
Before Your Begin

0
3
STEP 1
1
SC12-5
W12
2
3
H6-6
W6B
4

04
STEP 2
5
N10
W10
6
N6
W6B
H6-6
W6B
SC10-24
W10

05
STEP 3
7
SC10-5
W10
SC10-5
W10
8

06
STEP 4
9
10
11
13
14
15
16
17
18
19
S8-10
SC10-9
FN12
N10
W10
W10
12

07
STEP 5
20
L 4415mm
21
22
SC6-7
23
SC10-6
SC8-3
22
24
25 (79)
26
N10
W10
SC12-6
W12

08
STEP 6
27
20
L 4415mm
50

09
STEP 7
28
H6-4
W6B
H6-4
W6B

10
PRE-ASSEMBLY
20
L 4415mm
20
A10-5 W10
1
4
2
10 70 71 72 73
74
65
10 13
12
20
L 4415mm
23
16
SC10-24
16
16
SC10-9
30 31 32 33 34 35
SC10-9
W10
C10-8
34 36
37 38
3940
W10
SC10-4
C5-8
4122434445W10
SC10-18 46 C5-4
W1047
48
SC8-3
W10
N10 W10
49
19
19
SC10-7
W10
SC10-9
W10
22
51
53
52
56
N8
W10
SC10-4
55 54
57
SC10-17
W10
58 59
60
61
62
63
64
67
66
68
69
75
50
25
29
42
8
76

11
PARTS LIST
PART # DESCRIPTION QTY
1 Weight Stack Frame 1
Bottom Support Tube (Left) 1
Connection Plate 2
Bottom Support Tube (Right) 1
Top Cover Weldment 1
Front Shield Plate 1
Connection Plate 2 2
Hand Rail 1
Buffer Ring 4
Weight Plate 5Kg
Weight Plate 2.5Kg
36
2
Weight Label 2
Top Weight Plate 2.5Kg 2
Weight Pin 2
Single Pulley Holder 2
Pulley D114 8
Guide Rod 4
Guide Rod Retainer 4
Retaining Ring D19 8
Cable L 4415mm
Half Ring 2
Bearing 61905 12
Azimuth Adjusting Frame (Right) 1
Limit Post 4
Positioning Plate 2
Bushing ID12 2
Cable End Clip 2
Back Shield Plate 1
Knob 2
Right Arm 1
Spacer Ring 2
Pulley D89 2
Pulley 61806 4
Double Pulley Holder 2
Retaining Ring D30 2
Pulley D50 2
Cable End Clip 2 2
Sleeve 2
Bolt Cover 4
Shoulder Bolt 18×12 4
Bushing ID18 4
Stainless Plate 1 1
Altitude Label 1 1
2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
Nut M6N6 5
Nut M8N8 4
Nut M10N10 26
Washer 10W10 74
Big Washer 10W10B 4
Washer 12W12 2
Countersunk Head Screw M10x40C10-8 2
Countersunk Head Screw M10x40C10-8 2
Button Head Screw M10x25A10-5 8
Countersunk Head Screw M5x10C5-4 6
Countersunk Head Screw M5x10C5-8 2
Big Washer 6W6B 25
PART # DESCRIPTION QTY
Shoulder Bolt 10×1646 4
Bushing ID10 OD24 4
Serrated Plate 2
Limit Post OD20×15 2
Pulley D50 2
Spacer ID10.2 L10mm 2
Sleeve OD27 L52 2
Sleeve OD20 L17.5 2
Spacer ID10 L18.5 2
Air Cylinder 2
Shoulder Bolt 10×30 2
Lever (Right) 1
Spring L=34.5mm 2
Bushing ID10.5 OD19 2
Pin OD30 2
Plastic Sleeve ID10 L=53 2
Pull Pin 2
Spring L=31mm 2
Lever (Left) 1
Azimuth Adjusting Frame (Left) 1
Altitude Label 2 1
Left Arm 1
Weight Plate Bushing 76
C Clip 4
Rubber Ring 8
Aluminum Bushing 4
Retaining Ring D32 4
Elastic Pin 2
Hand Grip 1
Rubber Tube Cap 4
Rubber Foot Pad 4
Azimuth Label (Left) 1
Azimuth Label (Right) 1
47
48
49
50
51
52
53
54
55
75
76
*
*
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74

12
PARTS LIST
PART # DESCRIPTION QTY PART # DESCRIPTION QTY
SC12-5 Socket Cap Screw M12x25 4
SC12-6 Socket Cap Screw M12x30 2
H6-4
Hex Head Screw M6x10 8
H6-6 Hex Head Screw M6x15 12
H12-9 Hex Head Screw M12x45 2
SC10-9 Socket Cap Screw M10x45 10
SC10-16 Socket Cap Screw M10x80 2
SC10-17 Socket Cap Screw M10x85 2
SC10-22 Socket Cap Screw M10x110 2
SC10-24 Socket Cap Screw M10x120 2
SC10-24 Socket Cap Screw M10x120 2
SC10-5 Socket Cap Screw M10x25 6
SC10-6 Socket Cap Screw M10x30 6
SC10-7 Socket Cap Screw M10x35 2
SC8-3 Socket Cap ScrewM8x15 6
SC6-4 Socket Cap ScrewM6x10 16
SC6-7 Socket Cap ScrewM6x20 4
SC10-4 Socket Cap Screw M10x20 4
S6-6 Socket Set Screw M6x15 5
S8-10 Socket Set Screw M8x50 4